Juniper DUAL-PORT T1-E1 GPIMS, SRX-GP-Dual-Ti-E1, SRX-GP-Quad-Ti-E1 Datasheet

DUAL-PORT AND
QUAD-PORT T1/E1
GPIMS

DATASHEET

Product Overview

Dual-port and quad-port T1/E1 GPIMs

are used with the Juniper Networks

SRX650 Services Gateway, providing

high density for broadly deployed T1/

E1 network connections while making

eective use of the SRX650 modular

interface slots. Integrated channel

service unit/data service unit (CSU/

DSU) eliminates the need to deploy

a separate external device, saving

valuable space and simplifying

management.

Product Description

The Juniper Networks® dual-port and quad-port T1/E1 Gigabit-Backplane Physical Interface

Modules (GPIMs) provide the physical connection to T1 or E1 network media types and include

integrated CSU/DSU. Juniper’s dual-port and quad-port T1/E1 GPIMs forward packets for

processing and at the same time perform framing and line-speed signaling.

Features and Benefits

Juniper ’s dual-port or quad-port T1/E1 GPIMs provide the following benefits:

• Dual-port form factor that provides high density for broadly deployed T1/E1 network

connections, while making effective use of the Juniper Networks SRX650 Services

Gateway modular interface slots

• Integrated CSU/DSU that eliminates the need to deploy a separate external device,

saving valuable space and simplifying management

Features

The quad-port and dual-port T1/E1 Gigabit-Backplane Physical Interface Module (GPIM)

provides the following common key features for both T1 and E1 modes:

• Integrated CSU/DSU to eliminate the need for a separate external device

• Supports fractional T1/E1 connections in both 56 Kbps and 64 Kbps operating modes

• Independent internal and external clocking option

• Alarm reporting with a 24-hour history maintained

• Loopback (local and remote) and bit error rate test/pseudo-random binary sequence

(BERT/PRBS) diagnostics

• Multilink Frame Relay and Multilink Point-to-Point Protocol (PPP) support

• MTU size of 9,000 bytes (maximum)

1

SRX-GP-DUAL-TI-E1 SRX-GP-QUAD-TI-E1

Specifications

Product Specifications

Table 1: Dual-Port and Quad-Port T1/E1 GPIM Network Interface Specifications

FEATURE T1 MODE E1 MODE

Network Interface Specifications

Line encoding AMI/B8ZS HDB3

Mode Framed clear channel Framed clear channel (64 Kbps)

Unframed clear channel

Fractional framing Superframe (D4/SF)

Extended superframe (ESF)

High-Level Data Link Control (HDLC) Features

N x 64 Kbps or N x 56 Kbps, non-channelized
data rates (fractional T1/E1 support)

Cyclic redundancy check (CRC) 16/32 16/32

Shared flag Supported Supported

Idle flag/fill Supported Supported

Counters Runts, giants, frame check sequence (FCS),

(T1: N=1 to 24) (E1: N=1 to 31)

error, abort error, align error

G704

G704 with no CRC4

G703 unframed

Runts, giants, FCS, error, abort error, align error

Data Interface

• Clocking Modes: DCE, internal, loop

• Clocking Rates: 1.2 KHz, 2.4 KHz, 9.6 KHz, 19.2 KHz, 38.4 KHz,

56.0 KHz, 64.0 KHz 72.0 KHz, 125.0 KHz, 148.0 KHz, 250.0 KHz,

500.0 KHz, 800.0 KHz, 1.0 MHz, 1.3 MHz, 2.0 MHz, 4.0 MHz,

8.0 MHz

Interface Connector

• RJ-48

• System timing

• Internal (system clock)

• External (network recovered clocks)

Dimensions and Weight (W x H X D)

Dual Port T1/E1 GPIM

• 6.72 x 0.78 x 8.1 in (170.8 x 19.8 x 205.7 mm)

• 15.4 oz (0.44 kg)

Quad Port T1/E1 GPIM

• 6.72 x 0.78 x 8.1 in (170.8 x 19.8 x 205.7 mm)

• 15.4 oz (0.44 kg)

Environmental

• Operating temperature: 0° to 40° C

• Storage temperature: -40° to 70° C

• Relative humidity: 5% to 90% noncondensing

Diagnostics

Loopbacks

• Local, remote, payload

Test Patterns (BERT)

• All ones

• All zeros

• Alternating ones and zeros (AA/55)

• 1:3 or 1 in 4 pattern

• 1:7 or 1 in 8 pattern

• 3:24 (3 bits set in every 24 bits)

• QRSS20 (modified PRBS 2^20-1, with 14 zero suppression)

• PRBS 2^7-1

• PRBS 2^9-1 (as specified in ITU-T O.153)

• PRBS 2^11-1 (as specified in ITU-T O.153)/2047 pattern

• PRBS 2^15-1 (as specified in ITU-T O.151/O.153)

• PRBS 2^20-1 (as specified in ITU-T O.153)

• Programmable word or 32-bit programmable pattern

2

Network Alarms

• Alarm indication signal (AIS)

• Loss of frame (LOF)

• Loss of signal (LOS)

• Yellow (YLW)

Error Counters

• Controlled slipped seconds (CSS or CS)

• Line errored seconds (LES)

• Errored seconds (ES)

• Bursty errored seconds (BES)

• Severely errored seconds (SES)

• Severely errored framing seconds (SEFS)

• LOS seconds

• LOF seconds (LOFS)

• Unavailable seconds (UAS)

LEDs

Dual-port T1/E1 GPIM LED States

• Status—Green light means that the GPIM is online and

functioning normally; amber light means that GPIM is starting

up, running diagnostics, or shutting down; red light means that

GPIM has failed.

Quad-Port T1/E1 GPIM LED States

• Status—Green light means that the GPIM is online and

functioning normally; amber light means that GPIM is starting

up, running diagnostics, or shutting down; red light means that

GPIM has failed.

Standards and Compliance

Safety

• CAN/CSA-C22.2 No. 60950-1 Information Technology

Equipment

• UL 60950-1 Information Technology Equipment

• EN 60950-1 Information Technology Equipment

• IEC 60950-1 Information Technology Equipment EMC

(Emissions)

• FCC Part 15 Class A

• EN 55022 Class A

• AS/NZS 3548 Class A

• VCCI Class A

Immunity

• EN-61000-4-2 ESD

• EN-61000-4-3 Radiated Immunity

• EN-61000-4-4 EFT

• EN-61000-4-5 Surge

• EN-61000-4-6 Low Frequency Common Immunity

European Telecommunications Standardization Institute
(ETSI)

• GR-63-Core (2006) Network Equipment, Building Systems

(NEBS) Physical Protection

• GR-1089-Core (2006) EMC and Electrical Safety for Network

Telecommunications Equipment

• SR-3580 (2007) NEBS Criteria Levels (Level 3)

• ETSI EN 300 019: Environmental Conditions & Environmental

Tests for Telecommunications Equipment

• ETSI EN 300 019-2-1 (2000) – Storage

• ETSI EN 300 019-2-2 (1999) – Transportation

• ETSI EN 300 019-2-3 (2003) – Stationary Use at Weather-

protected Locations

• ETSI EN 300 019-2-4 (2003) – Stationary Use at Non-Weather-

protected Locations

• ETS 300753 (1997) – Acoustic noise emitted by

telecommunications equipment

• ETSI EN-300386-2: Telecommunication Network Equipment.

Electromagnetic Compatibility

Telecom

• FCC Part 68/TIA-968

• IC CS-03

T1 Standards

• ANSI T1.102

• ANSI T1.107

• ANSI T1.403

• Telcordia GR-499-CORE

• ACCUNET TR 62411 (Accunet T1.5)

E1 Standards

• ITU-T G.703

• ITU-T G.704

• ITU-T G.706

• ITU-T G.823

• ITU-T G.826

• CTR 12/ 13

• ACA TS 016

3

Juniper Networks Services and Support

Juniper Networks is the leader in performance-enabling services

and support, which are designed to accelerate, extend, and

optimize your high-performance network. Our services allow

you to bring revenue-generating capabilities online faster so

you can realize bigger productivity gains and faster rollouts of

new business models and ventures. At the same time, Juniper

Networks ensures operational excellence by optimizing your

network to maintain required levels of performance, reliability, and

availability. For more details, please visit www.juniper.net/us/en/

products-services/.

Ordering Information

PART NUMBER DESCRIPTION

SRX-GP-DUAL-T1-E1 Dual T1/E1, 2-ports with integrated CSU/DSU

GPIM for SRX650
Single GPIM slot

SRX-GP-QUAD-T1-E1 Quad T1/E1, 4-ports with integrated CSU/DSU

GPIM for SRX650
Single GPIM slot

Juniper Networks Junos® Operating System Release

Dual-port and quad-port T1/E1 GPIMs are supported on the

Juniper Networks SRX650 Services Gateway in Junos OS 9.5 and

greater releases.

About Juniper Networks

Juniper Networks, Inc. is the leader in high-performance

networking. Juniper offers a high-performance network

infrastructure that creates a responsive and trusted environment

for accelerating the deployment of services and applications

over a single network. This fuels high-performance businesses.

Additional information can be found at www.juniper.net.

Corporate and Sales Headquarters

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, CA 94089 USA

Phone: 888.JUNIPER (888.586.4737)

or 408.745.2000

Fax: [phone]

www.juniper.net

Copyri ght 2010 Juniper Netw orks, Inc. All r ights reser ved. Juniper N etworks, t he Juniper Net works logo, Jun os,
NetScr een, and Screen OS are registere d trademarks o f Juniper Netw orks, Inc. in th e United States and oth er
countri es. All other trad emarks, se rvice marks , registered m arks, or regis tered serv ice marks are th e property o f
their re spective own ers. Junipe r Networks a ssumes no res ponsibilit y for any inaccurac ies in this docum ent. Juniper
Netwo rks reser ves the right to cha nge, modify, tran sfer, or otherw ise revise thi s publication w ithout notice.

1000319-001-EN Oct 2010

APAC Headquar ters

Juniper Networks (Hong Kong)

26/F, Citypla za One

1111 King’s Road

Taikoo Shing, Hong Kong

Phone: [phone]

Fax: [phone]

4

EMEA Headquarters

Juniper Networks Ireland

Airside Business Park

Swords, County D ublin, Ireland

Phone: [phone]

EMEA Sales: 00800.4586.4737

Fax: [phone]

To purchase Juniper Networks solutions,

please contact your Juniper Networks

representative at 1-866-298-6428 or

authorized reseller.

Printed o n recycled pape r