FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rul es. These limits are de signed to pro vide reasonable
protection against harmful interference in a re sidential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will n ot occur in a particular installation. If this equipme nt does
cause harmful interference to radio or televi sion reception, which can be det ermined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receive r is
con-nected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressl y approved b y the p arty responsible for compliance could void the
user’s authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rul es.
Operation is subject to the following t wo conditions: (1) Thi s device may n ot cause harmful
interference, and (2 ) this device mu st accept any interfere nce received, including interference
that may cause undesired operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation e xposure limits set forth fo r an un controlled
environment.
The antennas used for thi s transmitter must be installed to provid e a separation distance of at
least 2
other anten
0 cm from all pe rsons and must not be co -lo
na or transmitter.
cated or o perating in conjunction with any
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this equipment near water.
6) Do not u sing near any heat sources su ch as radiators, heat resi sters, stove, or other
equipment that produce heat.
European CE notice to users and product statements
This product is CE marked accordi ng to the provis ions of the R&TT E
Directive(1999/5/EC). Hereby, JUNGGAM Co.,Lt d declares that this
product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
For further information, please contact http://
www.junggam.co.kr
JUNGGAM Co.,Ltd
202 Ho, Byucksan 2 Cha, 184, Gasan digital 2-ro, Geumcheon-gu, Seoul,
Korea
Tel: +82-2-720-5514
Fax: +82-2-720-5515
URL: www.junggam.co.kr
CONTACT INFORMATION
Manufacturer Address : 202 Ho, Byucksan 2 Cha, 184, Gasan digital 2-ro, Geumcheon-gu, Seoul, Korea
To locate in-country JUNGGAM CO.,LTD, distributors of the ONIA MINI please refer to the JUNGGAM
CO.,LTD Website http:// www.junggam.co.kr
These distributor(s) represent local contacts for this product.
CORPORATE HEADQUARTERS:
JUNGGAM CO.,LTD
202 Ho, Byucksan 2 Cha, 184, Gasan digital 2-ro, Geumcheon-gu, Seoul, Korea
Tel: +82-2-720-5514
Fax: +82-2-720-5515
Web: http://wwww.junggam.co.kr
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is Subject to the following two condition: (1) this device may not cause interference
,and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
EUROPEAN UNION “DECLARATION OF CONFORMITY”
DECLARATION OF CONFORMITY
JUNGGAM CO.,LTD
202 Ho, Byucksan 2 Cha, 184, Gasan digital 2-ro, Geumcheon-gu, Seoul, Korea
declare under our sole responsibility that the product(s)
ONIA MINI – ONIAM4
to which this declaration relate(s) is in conformance with the following standards:
EN 301 489-1 V1.9.2:2011
EN 301 489-17 V2.2.1:2012
EN 60950-1:2006/A2:2013
EN 300 328 V1.9.1:2015
following the provisions of the 1999/5/EC Directives.
Loading...