Junger Audio C8000 User Manual

digital audio
modular
processing system

Modular chassis
General information
Installation
System configuration
Warrenty information
Declaration of conformity

C8000

System Manual

C8000_150303.doc

digital audio
modular
processing system

C8000

modular chassis

• aluminium side panels chromated, aluminium cross extrusions

• RF protection by 0.8mm steel covers, zinc passivated

• external dimensions in accordance with DIN 41494

C8911/C8912/C8922/C8932/C8934/C8942

C8911

• 19" modular chassis, 1RU

• up to 3x 8HP or 6x 4HP space available

• one power supply with mains filter and switch

• card installation from front side

• 240mm depth

C8912

• two power supplies with mains filter and switch

• card installation from rear or front side

C8922

• 19" modular chassis, 3RU

• one internal power supply,
appliance socket with mains filter and switch

• card installation from one side only
(front or rear), 76HP

• 240mm depth

C8932

• 19" modular chassis, 3RU

• two power supplies C8901, redundant mode, load balanced

• appliance sockets with mains filters and switches

• card installation possible from both sides: front side - 72 HP, rear - 76 HP

• 435mm depth

C8934 split frame features

• 4 islands each one with 8 slots back to back
marked by colored slides

• audio clock distribution and busses are local
for each island

• only the CAN bus is wired across all slots

• card installation possible from both sides: front side - 64 HP, rear - 76 HP

C8942

• 19" modular chassis, 3RU Default air flow: Rear to front side

• two power supplies C8904, redundant mode, load balanced

• appliance socket with mains filter and switch

• card installation from one rear - 76HP

• 420mm depth

• 2 front panel fans with SNMP monitoring

• Air flow may be reversed by mounting the fans
the other way around

1/1

digital audio
modular
processing system

C8000

general information / installation

GENERAL FEATURES

configurable and scalable audio processing system
3RU-cards for installation in 19" modular chassis in accordance with DIN 41494
efficient system design for multichannel applications

I/O INTERFACING

AUDIO PROCESSING

SYNC INTERFACING

REMOTE CONTROL

CODING OF MODULE NUMBERS

up to 64 audio processing channels in one frame

digital 8ch I/Os (AES/EBU: bal. XLR, 110 Ohm or unbal. BNC, 75 Ohm)
optional sample rate converters
MADI interfaces
analog I/Os using sophisticated ADC and DAC technology
24bit audio resolution
3G-, HD- and SD-SDI interface for embedded audio processing

scalable digital audio processing system
3RU-cards system with functionality equivalent to 19" 1RU units from Junger Audio
24 bit processing, specific modules can operate up to 96kHz sampling rate

External sync. sources - AES, Word Clock, BB, Tri-Level

TCP/UDP/IP over Ethernet
web technology based GUI
application specific GUI
http based API
build in SNMP agent
hardware remote controller brc8x

1/2