Jung KNX 4192 TSM, KNX 4191 TSM, KNX 4193 TSM, KNX 4194 TSM Operating Instructions Manual
Universal push-button module
Universal push-button module, 1-gang
Art. No. : 4191 TSM
Universal push-button module, 2-gang
Art. No. : 4192 TSM
Universal push-button module, 3-gang
Art. No. : 4193 TSM
Universal push-button module, 4-gang
Art. No. : 4194 TSM
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise
safe operation cannot be ensured. Electrostatic discharges can cause defects in the
device.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
- Installation in appliance box according to DIN 49073
Product characteristics
- The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling
up moods, etc.
- Measurement of the room temperature
- Completion with keyset
- Two red status LEDs for each button
- A blue operation LED as an orientation light and to indicate the programming status
- Integrated bus coupling unit
- One, two or three functions per button
- Push-button function or rockers function, vertical or horizontal
- Connection of push-button extension module to expand the universal push-button sensor
module to include four additional buttons
3 Operation
Operating a function or load
Depending on the programming, a button can have up to three functions assigned to it –
upper/left, lower/right, entire surface. Operation depends on the specific function.
o Switch: Short press on button.
o Dim: Long press on button. The dimming process ends when the button is released.
o Move Venetian blind: Long press on button.
32566733
j0082566733
1/5
23.03.2016
Universal push-button module
o Stop or adjust Venetian blind: Short press on button.
o Call up light scene: Short press on button.
o Save light scene: Long press on button.
o Set value, e.g. brightness or temperature setpoint: Short press on button.
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
Snapping on the adapter frame
o With the adapter frame (3) in the correct orientation, snap it from the front onto the
pushbutton module (4) (figure 1). Note marking TOP.
Fitting and connecting the device
Figure 1: Mounting the push-button module
(1) Supporting frame
(2) Design frame
(3) Adapter frame
(4) Push-button module
(5) Fastening screws
(6) Buttons
(7) KNX connection terminal
(8) Box screws
Supporting frame side A for A design ranges, CD design ranges and FD design. Supporting
frame side B for LS design ranges.
When the push-button expansion module is used (figure 2): Preferably mounted vertically. Use
large supporting frame (14). When mounting on only one flush-mounted box, countersink the
lower screws into the wall, e.g. with a ø 6 x10 mm hole. Use supporting frame as template.
32566733
j0082566733
2/5
23.03.2016
Loading...