Jung KNX 2224 WH Operating Instructions Manual
KNX Home weather station
Ref.-no.: 2224 WH
Operating Instructions
Home weather station
1. Safety instructions............................................................................ 1
2. Device layout ..................................................................................... 2
3. Function ............................................................................................. 2
3.1. System information ....................................................................... 2
3.2. Designated use............................................................................. 2
3.3. Product features............................................................................ 2
4. Fitting and electrical connection..................................................... 3
4.1. Installing the device ...................................................................... 3
4.2. Aligning the device........................................................................4
4.3. Opening the device....................................................................... 4
5. Start-up............................................................................................... 4
6. Technical data ................................................................................... 5
7. Accessories.......................................................................................5
8. Guarantee........................................................................................... 6
1. Safety instructions
Electrical equipment must be installed and fitted by qualified
electricians only. Failure to observe the instructions may
cause damage to the device and result in fire or other
hazards. Do not operate the device in the vicinity of
chimneys or other exhaust or ventilation structures Do not
operate the device close to radio transmitters. Choose the
place of installation in such a way that the device is
accessible for servicing purposes. Do not open the sensor
head. Do not make inscriptions or stick labels on the sensor
head. Clean the underside of the sensor head with a soft
brush only. These operating instructions are part of the
product and must be left with the final customer.
Stand: Jan-08 825 628 03
KNX Home weather station
Ref.-no.: 2224 WH
2. Device layout
(1) Sensor head f
(2) Mounting bracket
(3) Terminal box
(4) Temperature and wind sensors
(5) Brightness and twilight sensors
(6) Rain sensor
3. Function
3.1. System information
This device is a product of the KNX system and complies with KNX
directives. Detailed technical knowledge obtained in KNX training courses
is a prerequisite to proper understanding.
The functionality of this device depends on the software. Detailed
information on software versions and attainable functionality as well as
the software itself can be obtained from the manufacturer‘s product
database. Planning, installation and commissioning of the unit is effected
by means of KNX-certified software. The product database, technical
descriptions, conversion programs and other utilities are available in their
latest version in the Internet.
www.jung.de
3.2. Designated use
• Measurement and evaluation of weather data: wind speed,
precipitation, twilight, temperature and brightness.
• Vertical mounting on the outside of buildings, preferably on
roofs and at facades.
3.3. Product features
• Integrated KNX bus coupler
• Compact housing
• Low-maintenance device
• Measured-value acquisition and limit value monitoring
2
Loading...