Jung FA10EB Operating Instructions Manual
Radio switch actuator, built-in
Radio Management
Radio switch actuator, built-in
Art. No. : FA10EB
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect device before working on it. At the same
time, take into account all circuit breakers that supply dangerous voltage to the device.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
The load is not electrically isolated from the mains even when the device is switched off.
The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.
Do not shorten, extend or strip the antenna. Device can be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) Switch actuator
(2) Programming button
(3) LED
(4) Antenna
3 Function
System information
By statute, the transmitting power, the reception characteristics and the antenna cannot be
changed.
The range of a radio system from the transmitter to the receiver depends on various
circumstances.
1/5
82526923
J0082526923
09.09.2016
The range of the system can be optimised by selecting the optimal installation location, taking
into account the structural circumstances.
Figure 2: Reduced range due to structural obstacles
Intended use
- Radio-controlled switching of incandescent lamps, fluorescent lamps, HV halogen lamps
and Tronic or inductive transformers with halogen lamps
- Operation with suitable radio transmitters or with installation buttons as an extension
- Suitable for mixed operation up to the specified output (Technical data)
- Installation in false ceilings or surface mounting
i It is not possible to teach a combination of presence detector and motion detector.
Product characteristics of the switch actuator
- Connection of installation buttons as extensions possible
- Light scene operation possible
- 2-point light control in combination with a radio presence detector possible
- Run-on time of approx. 1 minute in connection with radio motion detectors
4 Operation
Operation with radio transmitter
A radio transmitter has to be taught in order to be able to operate the actuator.
i Observe the instructions for the radio transmitter.
Switching light with installation button
o Press installation button briefly.
The light is switched on or off.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Connecting and mounting the device
Maintain a distance of at least 0.5 m from metal surfaces and electrical devices, e.g. microwave
ovens, hi-fi and TV systems, electronic ballasts or transformers.
2/5
82526923
J0082526923
09.09.2016
Radio Management
Radio switch actuator, built-in
Loading...