ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
Telefon +49 (0) 23 55/80 60
Telefax +49 (0) 23 55/80 6189
E-Mail kundencenter@jung.de
Product data sheet
Key card holder
Reference number
A 590 CARD CH
Key card holder
for push-button insert ref.-no.: 531 U, 532 U, 533 U, 534 U
The key card holder is used to keep the hotel card and to ensure a high level of safety and
energy savings, since all possibly powered electrical consumers are switched off
automatically when removing the hotel card.
The key card holder will be completed with a push-button of the JUNG portfolio.
The push-button ref.-no. 533 U with NO/NC contact and additional N-terminal is
recommended. The separate N-terminal enables the illumination of the device with
incandescent or LED lamp at the same potential. If the pilot lamp should not be at the
same potential, please install the push-button ref.-no. 534 U with separate signalling
contact.
Installation note: No plaster compensation possible. Insert must be mounted flush with the
wall. Supporting frame must be on top of wallpaper.
Thermoplastic (breakproof) lacquered
Colour:
champagne
Material:
thermoplastic lacquered
01.04.2019
1 of 1