Jung 804.28 G User Manual

ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle

Telefon [phone]
Telefax +49 (0) 23 55/80 6189
E-Mail [e-mail]

Product data sheet

Key switch/push-button

Reference number

804.28 G

Key switch/push-button

delivery without locking plate
for locking cylinder with total length of approx. 40 mm, e.g. ref.-no.: 28, 28 G1
Screw terminals for wires up to 2.5 mm

with 1 inlet M 20 x 1.5 at the bottom, with PE terminal
aluminium housing 90 x 75 x 65 mm
colour of housing: silver-grey (similar RAL 7001), cover: metallic anthracite
When using locking cylinder from other manufacturer , please consider, that the cylinder
has key access on only one side. (Otherwise water can get through the cylinder into the
switch housing. IP 44 is thus not guaranteed.)

Locking cylinder (acc. to DIN 18 252) for key switches

with 3 keys
different locks: ref.-no. 28
equal locks: ref.-no. 28 G1

Spare key

for 28 G1: ref.-no. 28 G1 SL

2

10 AX 250 V ~

Version:

Blind switch, 2-pole (2 motors)

Protection level IP 44 is ensured.

02.08.2019

1 of 1