Jung 5071 RF TSM, 5074 RF TSM, 5072 RF TSM, 5073 RF TSM User Manual
KNX RF radio transmitter module
KNX RF radio transmitter module 1-gang
Art. no.: ..5071 RF TSM
KNX RF radio transmitter module 2-gang
Art. no.: ..5072 RF TSM
KNX RF radio transmitter module 3-gang
Art. no.: ..5073 RF TSM
KNX RF radio transmitter module 4-gang
Art. no.: ..5074 RF TSM
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
The radio communication takes place via a non-exclusively available transmission path, and is
therefore not suitable for safety-related applications, such as emergency stop and emergency
call.
These instructions are an integral part of the product, and must remain with the end customer.
2 Battery safety instructions
This device or its accessories are supplied with batteries in the form of button cells.
DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-
ous substances may cause severe internal burns leading to death within 2 hours.
Keep new and used batteries away from children.
Do not use devices if the battery compartment does not close securely and keep away from
children.
If you suspect that a battery has been swallowed or is in any orifice of the body, seek immediate
medical attention.
WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to
leakage.
Do not heat or throw batteries into fire.
Do not reverse polarity, short-circuit or recharge batteries.
Do not deform or disassemble batteries.
Replace batteries only with an identical or equivalent type.
Remove empty batteries immediately and dispose of in an environmentally friendly manner.
32595413 29.07.2019
j0082595413
1 / 6
KNX RF radio transmitter module
3 Device components
Figure1: 4-gang radio wall transmitter module
(1) Base plate
(2) Fastening screws for the base plate
(3) Design frame
(4) Wall transmitter module
(5) Battery compartment
(6) Cover
(7) Fastening screws
(8) Cover kit
Figure2: Button assignment of wall transmitter module 1-gang, 2-gang, 3-gang and 4-gang
(9) Status LED per button pair, green
(10) Acknowledgement/transmission LED, red
32595413 29.07.2019
j0082595413
2 / 6
Loading...