Jung KNX RF Series, 4071 RF TSM, 4074 RF TSM, 4072 RF TSM, 4073 RF TSM Operating Instructions Manual

KNX RF radio transmitter module

KNX RF radio transmitter module 1-gang

Art. No. : 4071 RF TSM

KNX RF radio transmitter module 2-gang

Art. No. : 4072 RF TSM

KNX RF radio transmitter module 3-gang

Art. No. : 4073 RF TSM

KNX RF radio transmitter module 4-gang

Art. No. : 4074 RF TSM

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Keep button cells out of reach of children! If button cells are swallowed, get medical help
immediately.

Risk of explosion! Do not throw batteries into fire.

Risk of explosion! Do not recharge batteries.

The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.

These instructions are an integral part of the product, and must remain with the end
customer.

2 Device components

Figure 1: 4-gang radio pushbutton module

(1) Base plate
(2) Fastening screws for the base plate
(3) Design frame
(4) Pushbutton module with adapter frame (see adapter frame assembly instructions)
(5) Fastening screws
(6) Buttons

1/6

32591013
j0082591013

18.01.2016

Figure 2: Pushbutton assignment 1-gang, 2-gang, 3-gang and 4-gang

(7) Acknowledgement/transmission LED, blue
(8) Status LED per button pair, red

3 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.

The range of a radio system depends on various external circumstances. The range can be
optimised by the choice of installation location. The product documentation for this device
contains application basics for the KNX radio system.

This device meets the requirements of the R&TTE directive 1999/5/EC and may be operated in
all EU and EFTA countries.

The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software of version ETS5 or higher. You can find the
up-to-date product database, technical descriptions and declaration of conformity on our
website.

Intended use

- Radio operation of loads, e.g. light on/off, dimming, Venetian blinds up/down, brightness
values, calling up and saving light scenes.

- Operation in cabled KNX systems via media coupler (see chapter Accessories)

Product characteristics

- Pushbutton functions switching, dimming, Venetian blind control, value transmitter, scene
recall

- One, two, three or four button pairs for pushbutton function or rocker function

- Status indicator via status LED

- Battery-powered device

Energy saving mode

The device switches to the energy saving mode after a preset time. In energy saving mode, the
LEDs remains switched off. During operation, the energy saving mode is exited.

i Operations from the energy saving mode are executed immediately.

2/6

32591013
j0082591013

18.01.2016

KNX RF radio transmitter module