Jung 3091 TSM, 3093 TSM, 3094 TSM, 3098 TSM, 3092 TSM Operation Manual

Push-button module with integrated BCU Standard / Universal

Universal push-button module with integrated BCU, 1-gang

Art.-No.: 3091 TSM

Universal push-button module with integrated BCU, 2-gang

Art.-No.: 3092 TSM

Universal push-button module with integrated BCU, 3-gang

Art.-No.: 3093 TSM

Universal push-button module with integrated BCU, 4-gang

Art.-No.: 3094 TSM

Universal push-button module with integrated BCU, 8-gang

Art.-No.: 3098 TSM

Universal push-button module with illuminated inscription field and integrated BCU, 1-gang

Art.-No.: 3091 TSML

Universal push-button module with illuminated incription field and integrated BCU, -gang

Art.-No.: 3092 TSML

Standard push-button module with integrated BCU, 1-gang

Art.-No.: 3071 TSM

Standard push-button module with integrated BCU, 2-gang

Art.-No.: 3072 TSM

Standard push-button module with integrated BCU, 3-gang

Art.-No.: 3073 TSM

Standard push-button module with integrated BCU, 4-gang

Art.-No.: 3074 TSM

Standard push-button module with integrated BCU, 8-gang

Art.-No.: 3078 TSM

Operationsmanual

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.

Electrostatic discharges can cause defects in the device. Use only the supplied plastic
screws.

These instructions are an integral part of the product, and must remain with the end
customer.

2 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper
understanding.

The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database.

Planning, installation and commissioning of the device are carried out with the aid of KNX­certified software. Full functionality with KNX commissioning software version ETS3.0d
onwards.

An updated version of the product database, technical descriptions and conversion programs
and other auxiliary programs are available on our Internet website.

Intended use

- Serving of user, e.g. light on/off, dimming, blinds up/down, brightness values,

temperatures, calling up and saving light scenes, etc.

- Installation in appliance box to DIN 49073

Product characteristics

- The push-button functions switching, dimming, controlling blinds, valuators, calling up

moods, etc., depending on the application selected

- Completion with button set

32558813
J:0082558813

1/7

19.06.2009

Push-button module with integrated BCU Standard / Universal

- A blue operation LED as an orientation light and to indicate the programming status

- Integrated bus coupling unit

Push button module standard:

- A red status LED for each control surface

Push button module Universal:

- One or two functions per control surface

- Push-button function or rockers function, vertical or horizontal

- Two red status LEDs for each control surface

- Optional with illuminated text field

Push-button module Universal 8-gang and Universal with illuminated inscription field:

- Room temperature detection

3 Operation

Serve function or user

Push button module Standard: Each operating button is divided into two halves, with a function
assigned to each of them. Operation depends on the specific function.

Push button module Universal: Depending on the programming, a control surface can have up
to three functions assigned to it – upper/left, lower/right, entire surface. Operation depends on
the specific function.

o Switching: Short press on the corresponding control surface.
o Dimming: Long press on the corresponding control surface. The dimming process ends

when the control surface is released.

o Move blinds: Long press on the corresponding control surface.
o Stop or adjust blinds: Short press on the corresponding control surface.
o Call up lighting scene: Short press on the corresponding control surface.
o Save lighting scene: Long press on the corresponding control surface.
o Set value, e.g. brightness or temperature setpoint: Short press on the corresponding

control surface.

4 Information for qualified electricians

4.1 Fitting and electrical connection

DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live

parts in the working environment!

32558813
J:0082558813

2/7

19.06.2009

Push-button module with integrated BCU Standard / Universal

Connecting and mounting the device

picture 1

(1) Supporting ring
(2) Box screws
(3) Design frame
(4) Button sensor module
(5) Plastic screws
(6) Covers
(7) KNX connection terminal
Supporting ring side A for switch design range FD-Design, Supporting ring side B for LS design

range.
Button sensor module 8-fang (picture 2): When mounting on only one flush-mounted socket,

countersink the lower screws into the wall, e.g. with ø 6 x10 mm hole. Use supporting ring as
template.

Button sensor module with illuminable text field: Fasten with only one plastic screw. If possible
label before assembly (see chapter 4.2. Commissioning).

DANGER!
Danger of electrical shock!
When mounting with 230 V socket outlets under a common cover there is a

danger of electrical shocks in the event of a fault!
Use only the supplied plastic screws for fastening to the supporting ring.

o Mount supporting ring (1) in the right orientation on an appliance box. Use only the

supplied box screws (2). Note marking TOP; marking A or B in front.

o Push frame (3) onto supporting ring.
o Connect button sensor module (4) to the KNX using KNX connecting terminal (7) and push

onto the supporting ring.

o Fix push-button module to supporting ring using the supplied plastic screws (5). Tighten the

plastic screws only lightly.

o Before mounting the control surfaces (6), load the physical address into the device (see

chapter 4.2. Commissioning).

32558813
J:0082558813

3/7

19.06.2009