
KNX Touch sensor module Standard
Ref.-no.: 207x TSM
Operating Instructions
Touch sensor module Standard
1-channel, 2-channel, 3-channel, 4-channel
1. Safety warnings
Attention: Electrical equipment must be installed and fitted by
qualified electricians only.
Failure to observe any of the installation instructions may cause
damage to the device and result in fire or other hazards.
2. System Information
This device is a product of the KNX/EIB system and complies with KNX
directives.
Detailed technical knowledge obtained in KNX/EIB training courses is a
prerequisite to proper understanding. The functionality of this device
depends on the software.
Detailed information on loadable software and attainable functionality as
well as the software itself can be obtained from the manufacturer’s
product database.
Planning, installation and commissioning of the unit is effected by means
of KNX-certified software.
An updated version of the product database and the technical
descriptions are available in the Internet at www.jung.de.
Stand: Jul-08 825 586 03

KNX Touch sensor module Standard
Ref.-no.: 207x TSM
3. Function
A touch sensor rocker is „divided“ into an upper and a lower half (FIG A)
each controlling a function such as switching, dimming, shutter, value
transmitter, recalling and storing of light-scenes. Each rocker is equipped
with a red status LED. A blue operation LED can serve as an orientation
light.
Function assignment:
upper half of rocker: On / Brighter / Up
upper half of rocker: Off / Darker / Down
Together with the wall-mounted radio-control transmitter, Art. no. 40 FW,
the device can also be used within the JUNG-Funk-Management system.
More details are set out in the technical documentation of the
wallmounted radio-control transmitter.
The device must be equipped with the corresponding touch sensor
module covers (must be ordered separately):
1 channel 2071 TSM 1 x FD..901 TSA..
2 channel 2072 TSM 2 x FD..902 TSA..
3 channel 2073 TSM 1 x FD..902 TSA.. und 2 x FD..904 TSA..
4 channel 2074 TSM 4 x FD..904 TSA..
1 2
3 4
1
2
3
1
1 2
2