JUMO 902810 User Manual

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14,

Postal address:
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

36039 Fulda, Germany
36035 Fulda, Germany

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

RTD temperature probes for the
food and pharmaceutical industries

■ for temperatures from -50 to +250 °C

■ EHEDG certification

■ stainless steel protection tubes

■ with optional 2-wire transmitter

■ CIP-compliant installation

The RTD temperature probes can optionally be provided with terminal heads in stainless steel,
aluminium die-casting, or plastic.

To suit the specific needs of the different sectors of the food and pharmaceutical industries, a
wide variety of process connections can be supplied: from G 1/2 (1/2" pipe) screw fittings with
CIP-compliant sealing cone, through taper nipples with ring nut (milke pipe fitting), and
clamping nipples, to sliding ball weld-in sockets, weld-in sockets, Varivent connections, and
ball weld-in pockets. The protection tubes are made from stainless steel.

The RTD temperature probes for the food and pharmaceuticual industries are suitable for the
temperature range from -50 to +250 °C.

Pt100 single and twin temperature sensors to EN 60751, Class A, in 3-wire circuit ensure the
highest degree of accuracy.
For longer transmission distances, analog or programmable 2-wire transmitters are optionally
available.

Data Sheet 90.2810 Page 1/4

Technical data

Terminal head stainless steel 1.4571, M 16x1.5; IP67, ambient temperature -20 to +100 °C

Extension tube stainless steel, approx. 70 mm long, 9 mm dia.
Process connection screw fitting with CIP-compliant sealing cone, stainless steel 316 L, with EHEDG certification

Sheath stainless steel 316 L, 6 mm dia.

Measuring insert Pt100 temperature sensor to EN 60751, Class A, 3-wire circuit
Response times t
Transmitter analog transmitter, output 4 to 20 mA, data sheet 70.7030

Approval/approval marks

Form B DIN 43729, aluminium die-casting, M 20x1.5; IP54, ambient temperature -40 to +100 °C
Form BUZ, aluminium die-casting, M 20x1.5; IP65, ambient temperature -40 to +100 °C
Form BUZH, aluminium die-casting, M 20x1.5; IP65, ambient temperature -40 to +100 °C
Form BBKS, plastic (PA 6), M 20x1.5; IP54, ambient temperature -30 to +130 °C
Caution: reduced ambient temperature when using transmitters;
data sheet 70.7010/70.7030

clamping nipple to DIN 32676, stainless steel 316 L
clamping nipple with ring nut (milk pipe fitting) to DIN 11851, stainless steel 316 L
ball weld-in socket, stainless steel 316 L, clamping ring in PTFE
CIP-compliant weld-in socket, stainless steel 316 L, seal in PTFE
Varivent connection, stainless steel 316 L, with EHEDG certification
ball weld-in pocket, stainless steel 316 Ti
JUMO PEKA process connection adapter, stainless steel 316 L, with EHEDG certification

stainless steel 316 Ti, on request

= 10 sec, in water 0.4 m/sec, 6 mm dia.

0.9

analog transmitter, output 0 to 10 V, data sheet 70.7030
programmable transmitter, output 4 to 20mA/20 to 4 mA, data sheet 70.7010

2010-04-26/00351582

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14,

Postal address:
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

36039 Fulda, Germany
36035 Fulda, Germany

Dimensions

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Data Sheet 90.2810 Page 2/4

2010-04-26/00351582