Julian Bowen Limited Malmo Assembly Instructions Manual

01

Julian Bowen Limited

Assembly Instructions

VERSION: 14

1231

Malmo Massage Recliner and Footstool

No Extra

No ExtraNo Extra

No Extra

Tools Required

Tools RequiredTools Required

Tools Required

M5

A B C D

1X 18X 18X 8X

E F G H

2X 2X 1X 1X

IJK L

1X 1X 1X 4X

1234

X5X4X2

X1

5

1X

03

HARDWARE

PARTS

M8 M6×20mm

M8×25mm

M6

X1

X1

6

7

7

mm

×3

Safety Advice

04

Please take the time to carefully read through the whole of these
instructions before you commence.

Keep these instructions for future reference.

Unpack, inspect and check off all of the contents.

Please dispose of all packaging safely.

Small component parts could choke a child if swallowed.

We strongly recommend that you keep children well away from the work
area.

It would be sensible to lay a sheet or blanket on the floor where you
intend to work to avoid scratching this product and to protect your floor.

This product is heavy. Take extreme care when lifting to avoid personal
injury or damage to the product.

Assemble the product as close to its intended final position in the room as
possible.

HANDY HINT: If you keep the hardware in a bowl during assembly you
will be less likely to lose them.

(115kg).

The weight limit for this armchair

is

18

stone

05

3

4

1

2

A

B

C

4

2

4

D

1

N

E

F

D

2

1

×10

I

×4

4

H

H

I

×2

G

6

7

Chair Assembly

bla ck

bla ck

red

red

bla ck

bla ck

6

7

Recliner and Footstool are now ready for use.

06

6

7

5

3

K

D

K

5

3

K

D

5

B

×8

I

3

×4

H

C

L

L

Your

Stool Assembly

Malmo

• Press the ON/OFF button to switch the massage unit on. The massage unit will start

• Press the HEAT button to switch the heat function on. The HEAT light will be lit when

this function is on. Press the HEAT button again to switch the heat function off.

intensity

LowLow

Mid

Hi

ON/OFF

Heat

MODE

1

2

3

4

5

ON/OFF

MODE

INTENSITY

HEAT

SHOULD ER

LUMBAR

BACK

THIGH

HEAT light

Lumbar area is being heated
when lit

INTENSITY button

Used to select the

intensity of the massage
vibrations

MODE buttons

Used to select the

massage mode

POSITION lights

Lit when that massage
pad is operating

ON/OFF button

Used to switch the

massage system on or off

HEAT button

Used to switch the heat

function on or off

• Press the MODE button to
current massage mode is shown by one of the five MODE lights being illuminated.

• Press the INTENSITY button to increase the intensity of the massage vibrations. After

pressing the button, the new intensity will be shown momentarily by illuminating

of the INTENSITY lights

. Once the

intensity is at maximum, pressing the button again

level.

select the massage mode.The

will reset the intensity to it’s lowest

Massage chair Functions

Massage Chair Functions

07

in Mode 1 and will automatically shut down after 15 minutes if no other button is pressed.

Press the ON/OFF button again whilst in the massage mode to switch off the unit.

Storage:

• Keep the massage chair dry and clean. Use a dust sheet to protect the massage chair

if it will not be used for a long period.

• Do not expose the chair to strong sunlight or high temperatures, as this could cause

the fabric to fade.

• When not in use, switch the massage unit off and disconnect from the mains.

• Do not put any heavy articles on to the armrests or footstool as this could damage the
armchair and/or cause it to become unstable.

Cleaning:

• Do not rub the surface of the chair with hard or coarse objects.

• The wooden parts of the chair may be cleaned with a duster or dry cloth. Polish should

not be used as this can cause abrasion of the wood.

then wipe over with a dry cloth to remove any moisture.

• Only use a dry cloth to wipe the handset.

08

• Damage from misuse, and use over the specied weight limit.

• Material fading over time or through sunlight.

• Damage from spills or leaks.

• Collision damage (rubbing against walls, etc).

• Accidental tears and damage.

• Cigarette and match burns.

Your new recliner is covered by a 12 month manufacturers warranty.

Disposal and the environment

This product is covered by the waste electrical and electronic equipment
(WEEE) regulations. It should not be discarded with normal household

waste, but taken to your local collection centre for recycling. For further
information, please contact the local authority or approved disposal agency.

0560

Care and Maintenance

Fair Wear and Tear Policy

• Use a damp cloth to clean the fabric upholstery and steel frame

This warrant does not cover the following:

09