Machine time
is substantially
reduced !!
MEB-3810J-01A-A1
MEB-3810 Series
Computer-controlled, Eyelet Buttonholing Machine 〈for jeans and cotton pants
〉
MEB
-
38 10
The machine achieves a maximum sewing speed as high as 2,500 sti/min
and is provided with a cloth cutting knife which operates at an increased speed,
thereby promising increased productivity.
The machine is a newly developed highly-durable
eyelet buttonholing machine for jeans/cotton pants.
MEB
-
38 10
The machine achieves not only a maximum sewing speed as high as 2,500 sti/min,
but also reduced vibration and noise. The machine is a newly developed
highly-durable simple-design eyelet buttonholing machine for jeans/cotton pants.
Part name
Overedging width Needle size
Part No.
Application
J00 J01 C00 C01
Projection of the arm frame of the machine head has been reduced. In
addition, the cloth cutting knife is located closer to the operator side as
compared with the conventional model. Viewability, when placing the
material on the sewing machine, is improved, thereby contributing to
improved workability. In addition, the thread clamp mechanism of the
needle thread clamp (optional) has been improved for better viewability.
The surface onto which the material is placed is flattened (for the machine
with an overall thread trimmer). The material can, therefore, be placed on
the machine with ease to improve workability.
Increased productivity
Throat plate
Part name Part No.
Application
J00 J01 C00 C01
Work clamp (for eyelet buttonhole)
Part No.
Application
Max. cutting
length (mm)
J00 J01 C00
Pattern (mm)
X Y C01
Application
J00 J01 C00 C01
Cloth cutting knife (for eyelet buttonhole)
Part No.
Application
Max. cutting
length (mm)
J00 J01 C00
Pattern (mm)
X Y C01
Cloth cutting knife (for straight buttonhole)
Improved workability and operability
LIST OF THE REPLACEMENT GAUGES
◎ : Provided as standard No symbol : Optional △ : Accessory 㽎 : Installation is invalid
Part No.
Size
(mm)
Knife guard (for eyelet buttonhole)
Application
J00 J01 C00 C01
Part No.
Size
(mm)
Knife guard (for straight buttonhole)
X
Y
Shape
An LED light is provided as standard on the underside of the jaw of the
machine head. The area around the needle entry is thus brightened to improve
workability.
A retractable bottom cover is
adopted. Daily maintenance
(threading, adjustment of the
looper thread, cleaning, etc.)
can be carried out without
raising the machine head.
Photo: Provided with the needle thread clamp (optional)
A00 (for narrow stitch bite)
B00 (for wide stitch bite)
A01 (for narrow stitch bite)
B01 (for wide stitch bite)
2.0〜3.2mm
2.0〜4.0mm
2.0〜3.2mm
2.0〜4.0mm
Nm90〜Nm110
Nm90〜Nm110
Nm90〜Nm110
Nm90〜Nm110
40115403
40115405
40115404
40115406
◎
㽎
㽎
㽎
㽎◎◎
㽎
㽎
㽎
㽎
◎
Work clamp (left) 22mm
Work clamp (right) 22mm
Work clamp (left) 32mm
Work clamp (right) 32mm
Edging work clamp (left) 22mm
Edging work clamp (right) 22mm
Edging work clamp (left) 32mm
Edging work clamp (right) 32mm
Edging work clamp (left) 34mm
Edging work clamp (right) 34mm
Edging work clamp (left) 38mm
Edging work clamp (right) 38mm
Compensating work clamp (left) 34mm
Compensating work clamp (right) 34mm
Compensating work clamp (left) 38mm
Compensating work clamp (right) 38mm
14059802
14059703
14059604
14059605
40039844
40039843
40035239
40035238
40115241
40115240
40115239
40115238
40115325
40115324
40115309
40115316
◎
◎
◎
◎
㽎
㽎
㽎㽎◎
◎
㽎
㽎
◎
◎
㽎
㽎
40115664
40115665
32063604
※1
32063703
※1
32063802
※1
32063901
※1
32064008
※1
32064107
※1
32064206
※1
32064305
※1
32066904
※1
28
38
24
32
38
24
32
38
24
32
38
◎
◎
㽎
㽎
㽎
㽎
◎
◎
㽎
㽎
㽎
㽎
㽎
㽎
2.8
2.8
2.9
2.9
2.1
2.1
2.1
3.2
3.2
3.2
2.7
4.3
4.3
4.4
4.4
3.2
3.2
3.2
5.4
5.4
5.4
5.1
14041404
※1
32065302
※1
32065401
※1
38
24
32
0
0
0
0
0
0
△
◎
△
◎
㽎
㽎
△
◎
△
◎
㽎
㽎
㽎
㽎
㽎
㽎
40115670
40115669
40115668
40115667
40115666
32067209
※2
32067308
※2
32067407
※2
32067506
※2
32067605
※2
32067704
※2
32067803
※2
32067902
※2
32068009
※2
32068108
※2
32068207
※2
32068306
※2
32068405
※2
32068504
※2
32068603
※2
38
26
22
20
16
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
14042501
※2
32064404
※2
32064503
※2
14042600
※2
32064602
※2
32064701
※2
14042808
※2
32064800
※2
14042907
※2
32064909
※2
32065005
※2
14043109
※2
32065104
※2
32065203
※2
14043301
※2
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
MEB-3810J-01A-A1/MC-621ES/JTE01
Improved viewability around the needle entry JUKI's unique active tension
Two different thread trimmers are
prepared, i.e., the overall thread trimmer
and the needle thread trimmer
The machine is provided as standard with an LED light
Achievement of lower vibration and lower noise
Retractable bottom cover
Ease of placement of the material on the machine is increased
For the needle thread tension control, JUKI's unique
active tension mechanism is adopted to electronically
control the needle thread tension during the stitching
cycle. As a result, improved seam quality is achieved. In
addition, the sewing capabilities have been improved
to prevent stitch skipping, as well as to produce
well-tensed seams.
Two different thread trimmers are prepared. One of them
can be selected according to the customer's needs.
The overall thread trimmer has been newly designed
putting importance on productivity. It promises thread
trimming without fail and trims the thread in a short time.
The operator is no longer required to carry out fine
adjustments of the thread trimmer when changing the
sewing length.
A sewing machine with a needle thread trimmer has
been newly added to the MEB Series in response to
customer needs.
Quality improvement
The MEB-3810 reduces the machine time by approximately 22%*
due to its maximum sewing speed of 2,500 sti/min and its
speed-up cloth cutting knife, thereby demonstrating increased
productivity.
Then newly adopted direct-driven main shaft by means of a
compact AC servomotor not only achieves enhanced
responsiveness, but also achieves both reduced noise and
reduced vibration. In addition, the machine has adopted an
air-driven cloth cutting knife which promises excellent
responsiveness and operates faster than the conventional knife.
Machine time is substantially reduced
Adoption of a direct-driven main shaft and a revamping of the curve sections
of the thread take-up cam and looper cam contribute to remarkably reduced
vibration and noise. Vibration has been reduced by 7.7dB* and noise has
been reduce d by 1 .5dB* as compared with the conventional model to
produce this operator-friendly machine.
Condition: Measured at the maximum sewing speed
(MEB-3810: 2,500 sti/min; conventional MEB-3200: 2,200 sti/min)
The cloth cutting knife for the conventional MEB-3200 can be installed on the MEB-3810 by using a spacer (optional). The part number of the spacer is 40115728.※1
The knife guard for the conventional MEB-3200 can be installed on the MEB-3810 by using a spacer (optional). The part number of the spacer is 40115639.※2
Condition: Number of stitches: 21 for the straight section (one side),
11 for the eyelet section; knife length: 22 mm
SEWING MACHINERY BUSINESS UNIT
JULY, 2012 Printed in Japan(C)
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO
206-8551, JAPAN
PHONE : (81) 42-357-2254
FAX :
(
81
)
42-357-2274
http://www.juki.com
✽
Specifications and appearance are subject to change without prior notice for improvement.
✽
Read the instruction manual before putting the machine into service to ensure safety.
✽
This catalogue prints with environment-friendly soyink on recycle paper.
To order, please contact your nearest JUKI distributor.
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in
the research, development, design, sales, distribution,and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
(1) The development of products and engineering processes
that are safe to the environment
(2) Green procurement and green purchasing
(3)
Energy conservation (reduction in carbon-dioxide emissions)
(4) Resource saving (reduction of papers purchased, etc.)
(5) Reduction and recycling of waste
(6) Improvement of logistics efficiency (modal shift and
improvement of packaging, packing, etc.)
CodeApplication
J
C
Jeams
Cotton pants and working wear
CodeThread triming style
00
01
Needle thread trimming type
Overall thread trimming type
CodeOptions
ZZ
A1
Not provided
Needle thread clamp device
CodeTable stand
A
On the table
CodePower supply
E
K
N
200〜240V (for General Export)
200〜240V (for General Export)
200〜240V (for CE) (not provided with power switch)
3-phase
Single-phase
MEB3810 A
MC621 S
SPECIFICATIONS
WHEN YOU PLACE ORDERS OPTIONS
Please note when placing orders, that the model name should be written as follows:
Machine head
Control box
・2-pedal switch
[
Part No.40033831(Pedal switch, asm.
) ]
・Sub table asm.
(for sunken head setup)
[
Part No.40115994
]
The work clamp can be lifted/lowered
and the machine can be started using
the pedal switch.
※ To use the 2-pedal unit, pedal switch
cable asm. (Part No.40114433) is required.
＊"sti/min" stands for "Stitches per Minute."
Stitch system
Sewing speed
Stitch length
Taper bar length
Work clamp height
Method for changing stitch shape
Buttonhole cutting method
Cloth cutting knife drive system
Needle (at the time of delivery)
Lubricating oil
Compressed air
Dimensions
Stitching shape patterns
Model name
1-needle, double chainstitch (with gimp)
400〜2,500sti/min
Air consumption
Power requirement and power consumption
Weight
49.5 l/min (11.6 cycle/min)
Single-/3-phase 200-240V, 250VA
Machine head: 110Kg ,Operation panel: 0.3Kg ,Control Box: 5Kg
10〜38mm (Needle thread trimming type)
10〜34mm (Overall thread trimming type)
3〜15mm
13mm
By selecting a program
By cut-before knife or cut-after or without buttonhole cutting
Pneumatic
D0×558 Nm90〜Nm120 (Nm110)
JUKI MACHINE OIL No.18 (equivalent to ISO VG18)
Main regulator : 0.5 MPa
Hammer pressure regulator : 0.35 MPa (standard), 0.4 MPa (Max)
Machine head : 382mm (W) × 656mm (D) × 584mm (H)
Completed-product : 1,050mm (W) × 700mm (D) × 1,248mm (H) (thread stand is not included)
The machine is provided as standard with 10 different stitching shape patterns of eyelet buttonhole.
As many as 89 different patterns can be stored in memory and selected.
Application Jeans
MEB-3810J
Cotton pants and working wear
MEB-3810C
Buttonhole
without a bartack
Buttonhole with
a round bartack
Buttonhole with
a straight bartack
Buttonhole
with a taper bar
Needle throwing width
Mechanical adjustment of the needle throwing width : 2.0〜4.0mm
Compensation of the needle throwing width (by the lower feed dog) : 1.5〜5.0mm
Loading...