JUKI DLN-6390, DDL-5550N-7, DLN-5410N, DLN-5410N-7, DLN-6390-7 Handbook

...
www.egemakine.com.tr
1
1-needle, Lockstitch Machine
DDL-5550N • DDL-5550N-7 DDL-8700 • DDL-8700-7 DDL-9000 DLN-5410N • DLN-5410N-7 DLN-6390 • DLN-6390-7 DLN-9010 DLU-5490N • DLU-5490N-7 DLU-5494N-7/IP-100C DLD-5430N • DLD-5430N-7 DLM-5200N • DLM-5210N DLM-5400N-7 • DMN-5420N-7
2
2-needle, Lockstitch Machine
LH-3128 • LH-3128-7 • LH-3168 • LH-3168-7 • LH-3178 • LH-3178-7 • LH-3188 • LH-3188-7 • LH-3120
LH-3126F LH-3162-7 • LH-3182-7
3
Overlock/Safety Stitch Machine
MO-6100D SERIES MO-6700S SERIES MO-6900S SERIES MO-6900R SERIES MO-6900C SERIES MO-6900G SERIES MO-6900J SERIES LB-3 • LB-4
4
Zigzag Stitching Machine
LZ-2290A SERIES LZ-2290A-SR-7 LZ-2280N • LZ-2281N •
LZ-2282N • LZ-2282N-7 • LZ-2284N • LZ-2284N-7 • LZ-2286N • LZ-2288N • LZ-2285N • LZ-2280NU • LZ-2284NU • LZ-2284NU-7
LZ-2284C-7/SC-910 LZ-271 • LZ-391N • LZ-586
5
Coverstitch Machine
MF-7722 • MF-7723 MF-7723/UT33 MF-7722E10B40/MD10 •
MF-7723E10B□□/MD10 MF-7822 • MF-7823 MF-7822/UT25 • MF-7823/UT25 MF-7823H20B□□
MF-7823H20B□□/UT25 MFB-2600
6
Double Chainstitch Machine
MH-380 • MH-382 MH-481 • MH-481-5(4) •
MH-484 • MH-484-5(4) • MH-486-5(4)
MH-1410 MS-1190 • MS-1260 • MS-1261
7
Button Sewing Machine
AMB-289 MB-1800B • MB-1800A/BR10 MB-373NS SERIES MB-377NS SERIES LK-1903A • LK-1903A/BR35
8
Bartacking Machine Shape-tacking Machine
LK-1900A • LK-1901A • LK-1902A LK-1850 SERIES LK-1910 • LK-1920 • LK-1930 LK-1941ZA • LK-1942HA • LK-1942GA
9
Buttonholing Machine Eyelet Buttonholing Machine
LBH-1790 LBH-780 SERIES MBH-180 • MBH-180S • MBH-180L MEB-3200SS • MEB-3200RS • MEB-3200JS •
MEB-3200CS • MEB-3200TS
10
Special Purpose Machine
ML-111 MP-200N DP-2100 LT-591
11
Computer-controlled Cycle Machine
AMS-210D • AMS-210D P TYPE AMS-210DHL6100SZ AMS-210DHL6300SZ AMS-215D • AMS-221D •
AMS-215D P TYPE • AMS-221D P TYPE AMS-223C • AMS-224C •
AMS-223P • AMS-224P
12
Automatic Button Sewing Indexer Automatic Buttonholing Indexer
ACF-164-1800 ACF-164-1903 ACF-172-1790 ACF-182
13
Automatic Machine
FLS-350NA • FLS-350NB AVP-875S • AVP-875A APW-297 • APW-297B • APW-298 APW-194N • APW-195N • APW-196N MOL-254 ASN-697 • ASN-695
14
Motors Devices & Software
SC-910 • SC-380 • EC-10B V050 SERIES PGM-20 PM-1
Machine for Heavy Materials
15
Flat-bed Sewing Machine Zigzag Stitching Machine
DDL-5600N • DDL-5600N-7 DDL-8700L DU-140 • DU-141NH • DU-141H-7 DNU-1541 • DNU-1541S • DNU-1541-7 LU-1508NS • LU-1508NH • LU-1510N •
LU-1510N-7 • LU-1509NS • LU-1509NH • LU-1511N-7
LU-1560N • LU-1560N-7 • LU-1565N • LU-1561N • LU-1561N-7
LU-1520N-7 • LU-1521N-7 LU-2210N-7 • LU-2210W-7 •
LU-2260N-7 • LU-2260W-7 LZH-1290 • LZH-1290-7
16
Long Arm Sewing Machine
LU-2216N-7 • LU-2266N-7 DU-580 DNU-261H
17
Cylinder-bed Sewing Machine
DSU-145 • DSU-145-7 DSC-244 • DSC-244-7 •
DSC-245 • DSC-245-7 • DSC-246 • DSC-246-7
LS-1340 • LS-1341 • LS-1342 • LS-1342-7
18
Post-bed Sewing Machine
PLC-1610 • PLC-1610-7 PLC-1660 • PLC-1660L • PLC-1665 • PLC-1660-7 PLC-1690 • PLC-1691 PLH-981 • PLH-982 • PLN-985 • PLN-986
19
Machine for Extra Heavy Materials
TU-273 • TNU-243 LG-158 • LG-158-1 TSH-411 • TSN-421 • TSU-471 • TSC-441 TSC-461
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19
www.egemakine.com.tr
DDL-5550N, 5550N-7 (September, 2003) 1/2
Model name Application Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle
(at the time of delivery) Hook Lubrication Lubricating oil
DDL-5550N
For medium-weight materials
5,500rpm
5mm
30.7mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#14) For JE: 134 (Nm75)
DDL-5550NA
For light-weight materials
4mm
29mm
By hand: 4mm, By knee: 9mm
DA×1 (#9) For JE: 134 (Nm65)
DDL-5550NH
For heavy-weight materials
5mm
35mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#21) For JE: 134 (Nm130)
Automatic-lubricating full-rotary hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Model name Application Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle
(at the time of delivery) Hook Lubrication Lubricating oil Automatic reverse feed
function Power requirement Power consumption Total weight
DDL-5550N-7
For medium-weight materials
5,000rpm
30.7mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#14) For JE: 134 (Nm75)
DDL-5550NA-7
For light-weight materials
29mm
By hand: 4mm, By knee: 9mm
DA×1 (#9) For JE: 134 (Nm65)
DDL-5550NH-7
For heavy-weight materials
5mm
35mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#21) For JE: 134 (Nm130)
Automatic-lubricating full-rotary hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Provided as standard
Single-phase 100〜120V, 200240V, 3-phase 200240V
650VA
81kg
SPECIFICATIONS
The sewing machine has been designed by a computer to achieve the optimal balance and the structure of the sewing machine frame has been strengthened. This reduces vibration and operation noise, allowing the operator to use the machine more comfortably. As a result, the sewing machine greatly improves the working environment.
The thread take-up mechanism, feed mechanism, thread paths and hook have been further improved to enhance responsiveness to material changes and to ensure consistent stitch quality. (DDL-5550N-7)
DDL-5550N DDL-5550N-7
(with automatic thread trimmer)
1-needle, Lockstitch Machine
4,000rpm
4,000rpm
4mm
DDL-5550N-7-WB/CP-160A
1
www.egemakine.com.tr
DDL-5550N, 5550N-7 (September, 2003) 2/2
Remaining bobbin thread detector (AE-4) Material edge sensor (ED-2)
DDL5550N 7
Application
For medium-weight materials For light-weight materials For heavy-weight materials
Code
A H
Code
Auto-lifter
(optional)
Not provided Provided
(AK85)
AK
Model
AK85
AE-4
ED-2
―
Part N o.
GAE-040000A0
112-43763
Description
Auto-lifter Remaining bobbin
thread detector
Material edge sensor
Micro-lifter (asm.)
To retrofit the AE-4 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
Feature
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
This device can be installed on the back of the faceplate. It is very convenient for frequent use.
WHEN YOU PLACE ORDERS
OPTIONS
DDL5550N
Wiper and automatic reverse feed function
Not provided Provided
Wiper
Automatic reverse feed function
Provided Provided
Code
0B
WB
SC910
M91S
PSC box Motor for SC
Operation panel
Operation panel Code
IP-100C IP100C CP-160A CP160A
Control box Code
Standard S Provided with built-in I/O board A
Pulley belt Code Standard S
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-4).
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S
For JUS
, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
www.egemakine.com.tr
DDL-8700, 8700-7 (September, 2003) 1/2
Model name Application Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle
(at the time of delivery) Feed dog Hook Lubrication Lubricating oil Weight of the machine head
DDL-8700 DDL-8700A DDL-8700H
For medium-weight materials For light-weight materials For heavy-weight materials
5,500rpm 4,000rpm
5mm 4mm 5mm
30.7mm 35mm
By hand: 5.5mm, By knee: 13mm By hand: 4mm, By knee: 9mm By hand: 5.5mm, By knee: 13mm
DB×1 (#14) #9#18 DA×1 (#9) #9#11 DB×1 (#21) #19#23 For JE: 134 (Nm90) For JE: 134 (Nm65) For JE: 134 (Nm130)
4-row 3-row
Automatic-lubricating full-rotary hook
Automatic
JUKI Machine Oil No.7 (equivalent to ISO VG7)
28kg
Model name Application Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle
(at the time of delivery) Feed dog Hook Lubrication Lubricating oil Automatic reverse feed
function Wiper Power requirement Power consumption Total weight
DDL-8700-7 DDL-8700A-7 DDL-8700H-7
For medium-weight materials For light-weight materials For heavy-weight materials
5,000rpm 4,000rpm
4mm 5mm
30.7mm 35mm
By hand: 5.5mm, By knee: 13mm By hand: 4mm, By knee: 9mm By hand: 5.5mm, By knee: 13mm
DB×1 (#14) #9#18 DA×1 (#9) #9#11 DB×1 (#21) #19#23 For JE: 134 (Nm90) For JE: 134 (Nm65) For JE: 134 (Nm130)
4-row 3-row
Automatic-lubricating full-rotary hook
Automatic
JUKI Machine Oil No.7 (equivalent to ISO VG7)
Provided as standard
Provided as standard for DDL-8700-7-WB model.
Single-phase 100〜120V, 200240V, 3-phase 200240V
650VA
81kg
SPECIFICATIONS
The optimum-balance and highly rigid machine head were created using the latest 3D-CAD design technology. Thanks to its low vibration and low noise feature, the machine head provides the operator with a comfortable work environment. In addition, the distance from the machine arm to the needle on the front of the machine head is sufficiently wide to allow easy handling of the sewing material. The machine inherits the desirable features, such as high-speed stitching performance, extreme stitching performance, ease of operation, and reliability, from the highly evaluated previous JUKI lockstitch machines.
The thread take-up, hook, thread path, presser foot and feed mechanisms have been thoroughly investigated and modified to enable low-tension sewing. The machine flexibly responds to various kinds of materials, producing beautiful seams of consistent quality.
Enhanced maintainability is ensured by the improved machine head, such as incorporation of an eccentric pin that is used to adjust the feed dog. In addition, the machine is provided with a mounting seat for attachment to improve workability while replacing the attachment and increasing the durability of the machine bed surface.
DDL-8700-7
The machine comes with a thread trimming mechanism that performs speedy and sure thread trimming to achieve highly efficient sewing work.
DDL-8700 DDL-8700-7
(with automatic thread trimmer)
1-needle, Lockstitch Machine
DDL-8700-7-WB/CP-160A
1
www.egemakine.com.tr
DDL-8700, 8700-7 (September, 2003) 2/2
Remaining bobbin thread detector (AE-4) Material edge sensor (ED-2)
DDL8700 7
Application
For medium-weight materials For light-weight materials For heavy-weight materials
Code
A H
Code
Auto-lifter
(optional)
Not provided Provided
(AK85)
AK
WHEN YOU PLACE ORDERS
OPTIONS
DDL8700
Wiper and automatic reverse feed function
Not provided Provided
Wiper
Automatic reverse feed function
Provided Provided
Code
0B
WB
Model
AK85
AE-4
ED-2
―
Part N o.
GAE-040000A0
112-43763
Description
Auto-lifter Remaining bobbin
thread detector
Material edge sensor
Micro-lifter (asm.)
To retrofit the AE-4 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
Feature
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
This device can be installed on the back of the faceplate. It is very convenient for frequent use.
SC910
M91S
PSC box Motor for SC
Operation panel
Operation panel Code
IP-100C IP100C CP-160A CP160A
Control box Code
Standard S Provided with built-in I/O board A
Pulley belt Code Standard S
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-4).
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S
For JUS
, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
www.egemakine.com.tr
DDL-9000 (September, 2003) 1/2
DDL-9000DS-WB/CP-160D
With its newly developed large machine head, the DDL-9000 dramatically upgrades seam quality and increases efficiency.
The DDL-9000 incorporates a direct-drive system (DD system) that offers quick start-up, upgraded stop accuracy, excellent responsiveness, and a stronger needle thrust for faster, better penetration into the material.
Designed without an oil pan, the machine offers improved maintainability with easy removal of dust and lint.

DDL-9000

Direct-drive, High-speed, 1-needle, Lockstitch Machine with Automatic Thread Trimmer
SPECIFICATIONS
WHEN YOU PLACE ORDERS
PSC box Operation panel
SC910
DDL9000 B
Machine head type Code
Dry head D Minute-quantity lubrication
S
Operation panel Code
IP-100B IP100B CP-160D CP160D
PSC box Code
For JUS(LA)
Single-phase 100〜120V PFL S For JUS*, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
Application Code
For light- to medium-weight materials S For heavy-weight materials H
For extra light-weight materials and foundation
F
*
Control box Code
Standard S Provided with built-in I/O board A
For the sewing specification "H," only the minute-quantity lubrication type (S type) machine head is available.For the sewing specification "F," only the dry head type (D type) machine head is available.
Wiper Code
Not provided 0 Provided W
Device and attachment Code
Not provided Auto-lifter (pedal-driven) AK118
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-8).
JUS: North America and Central and South America.
Model name
Dry head type Minute-quantity lubrication type
DDL-9000DS DDL-9000DF DDL-9000SS DDL-9000SH
Application
For light- to
For extra light-weight materials
For light- to For heavy-weight materials
medium-weight materials
and foundation
medium-weight materials
Max. sewing speed 4,000rpm 3,500rpm 5,000rpm 4,500rpm Max. stitch length 5mm 4mm 5mm Needle bar stroke 30.7mm 35mm Lift of the presser foot By hand : 5.5mm, By knee : 15mm, auto : 10mm Lubrication No lubrication Minute-quantity lubrication to needle bar and hook Lubricating oil JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Hook
Exclusive no-lubricating hook
(plastic hook with special-purpose race surface) Automatic lubricating hook
Needle DB×1 (#14) #9#18 DB×1 (#9) #8#11 DB×1 (#14) #9#18 DB×1 (#21) #19#23 (at the time of delivery)
For JE:134 (Nm75) Nm65Nm110 For JE:134 (Nm65) Nm65Nm75 For JE:134 (Nm75) Nm65Nm110
For JE:134 (Nm130) Nm120Nm160
Distance from needle to machine arm
300mm
Size of bed 517mm×178mm Bobbin thread winder Built-in the machine head Machine head drive Compact AC servomotor that is directly connected to the main shaft (direct-drive system) Automatic
reverse feed function
Provided as standard
Power requirement Power consumption
Single-phase 100〜120V, 200240V, 3-phase 200240V/650VA
Total weight 84.5Kg
1
www.egemakine.com.tr
DDL-9000 (September, 2003) 2/2
To retrofit the AE-8 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
SC-910 model control box is resistant to voltage fluctuations. It comes with a compact and energy-saving type switching power supply system that does not use a transformer. This contributes to improved reliability.
The number of revolutions can be selected from among three different types (standard, slow and fast) according to the preference of the operator. In addition to this feature, the control box incorporates many different functions for upgraded workability.
OPTIONS
Model Description
AK118
AE-8
ED-4
―
Part No.
This switch, mounted on the reverse feed switch, enables handy control of various functions. It is especially effective when operating the machine while standing.
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press, on the front part of the foot pedal. With this function, the operator doesn’t have to look away from the sewing work to check the bobbin thread. (Only supported by the minute-quantity lubricating type machine)
When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
This device can be installed on the back of the face plate. It is very convenient for frequent use.
Feature
236-32656
GAE-080000A0
236-11056
Auto-lifter Optional switch
Remaining bobbin thread detector
Material edge sensor
Micro-lifter (asm.)
Newly developed control box.
SC-910
The operation panel has been provided with a large user­friendly LCD. A pictograph and set values are shown on the same screen, which promises improved operability of the panel.
The operation panel has been provided with a variety of communication and maintenance control features and is able to store data on a SmartMedia or personal computer.
The features of the operation panel can be updated without the need for changing the PWB/ROM.
The operation panel can be selected according to the process.
IP-100B
Four different kinds of pattern sewing are possible: automatic reverse stitching, constant-dimension sewing, rectangle-shape sewing, and multi-layer stitching. The maximum number of stitches that can be set for automatic reverse stitching (single or double) is 19.
CP-160D
www.egemakine.com.tr
DLN-5410N, 5410N-7 (September, 2003) 1/2
Model name Application Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle
(at the time of delivery) Hook Thread
Lubrication Lubricating oil Automatic reverse feed
function Power requirement Power consumption Total weight
DLN-5410N-7
For light- to medium-weight materials
5,000rpm
4mm
DLN-5410NH-7
For heavy-weight materials
By hand: 5.5mm, By knee: 13mm
DB×1 (#14) For JE: 134 (Nm90)
DB×1 (#21) For JE: 134 (Nm130)
DB×1 (#21) For JE: 134 (Nm130)
Automatic-lubricating double-capacity full-rotary hook
#30#8, B46B92, Nm60/3〜30/3
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Provided as standard
Single-phase 100〜120V, 200240V, 3-phase 200〜240V
650VA
83kg
4,000rpm
4.5mm
DLN-5410NJ-7
For jeans
The machine head has been redesigned to improve the performance of each component. By the machine's low-tension sewing capability and the adjustment function for the needle-feed amount (±15%), the machine performs stitches without uneven material feeding and puckering, thus enhance the machine's ability to respond to any change in the material to be sewn.
DLN-5410NJ-7
By increasing the maximum feed amount (stitch length) to 4.5mm and the needle bar stroke to 33mm, penetration into heavy-weight materials and ease of operation have been considerably enhanced. The horizontal-axis double-capacity hook effectively cuts the frequency of troublesome bobbin thread replacement procedures in half.
DLN-5410N DLN-5410N-7
(with automatic thread trimmer)
1-needle, Needle-feed, Lockstitch Machine
SPECIFICATIONS
Automatic-lubricating full-rotary hook
―
30.7mm 33mm
Model name
Application
Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle
(at the time of delivery) Hook Lubrication Lubricating oil
DLN-5410N
For light- to medium-weight materials
5,000rpm
4mm
DLN-5410NH
For heavy-weight materials
4,000rpm
4.5mm
30.7mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#14) For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
For heavy-weight materials
(long stitch length type)
3,000rpm
6mm
DB×1 (#21) For JE: 134 (Nm130)
DLN-5410NL
DB×1 (#21) For JE: 134 (Nm130)
DLN-5410N-7-WB/CP-160A
1
www.egemakine.com.tr
DLN-5410N, 5410N-7 (September, 2003) 2/2
Remaining bobbin thread detector (AE-4) Material edge sensor (ED-2)
WHEN YOU PLACE ORDERS
Model
AK85
AE-4
*
AE-5
ED-2
―
Part N o.
GAE-040000A0
GAE-050000A0
112-43763
Description
Auto-lifter
Remaining bobbin thread detector
Material edge sensor
Micro-lifter (asm.)
Feature
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn’t have to look away from the sewing work to check the bobbin thread.
For DLN-5410NJ-7, select AE-5 When the sensor detects a material edge, it immediately stops the sewing machine and actuates
the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
This device can be installed on the back of the faceplate. It is very convenient for frequent use.
OPTIONS
To retrofit the AE-4 or AE-5 to your existing machine, I/O board A (part number: 400-06080), which is separately available, is required.
DLN5410N
Application
For light- to medium-weight materials
For heavy-weight materials For heavy-weight materials
(long stitch length type)
Code
H
L
DLN5410N 7
Application
For light- to medium-weight materials
For heavy-weight materials For jeans
Code
H
J
Code
Auto-lifter
(optional)
Not provided Provided
(AK85)
AK
Wiper and automatic reverse feed function
Not provided Provided
Wiper
Automatic reverse feed function
Provided Provided
Code
0B
WB
SC910
M91S
PSC box Motor for SC
Control box Code
Standard S Provided with built-in I/O board A
Pulley belt Code Standard S
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-4 or AE-5).
Operation panel
Operation panel Code
IP-100C IP100C CP-160A CP160A
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S
For JUS
, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
www.egemakine.com.tr
DLN-6390, DLN-6390-7 (September, 2003) 1/2
The needle bar stroke is as high as 35mm. This offers increased penetration of the needle into the material to improve adaptability to heavy-weight materials.
The machine demonstrates excellent sewing capabilities, when sewing heavy-weight denim or multi-layered portions, that free it of sewing troubles such as stitch gathering, stitch skipping and needle breakage.
The machine is able to sew material with a low presser foot pressure while preventing the material from flapping. As a result, the material can be sewn free of puckering.
The top- and bottom-roller style feed mechanism forms seams with increased consistency to achieve improved hemming quality while reducing uneven hems.
SPECIFICATIONS
High-speed, Cylinder-bed, 1-needle, Needle-feed Lockstitch Machine with Large Hook
DLN-6390 DLN-6390-7
(with automatic thread trimmer)
WHEN YOU PLACE ORDERS
DLN-6390-7
Model name DLN-6390 DLN-6390-7 Application Bottom-folding and hemming (lockstitch type) Max. sewing speed 5,000rpm
Stitch length
Standard gears: 3.2mm (2.8mm) / Supplied gears: 2.3mm, 3.6mm /
Optional gears: 2.1mm, 2.5mm, 4.2mm (utilized by changing pitch conversion gears)
Needle
SCHMETS UY180GVS Nm140
range of use: Nm90 ~ Nm150 (equivalent to #14 ~ #22.5)
Needle bar stroke 35mm Hook Automatic-lubrication type exclusive full-rotary 1.7-fold hook Lift of the presser foot Max. 14mm Feed system Top- and bottom-roller style Binder open/close type Manual type Driven by air cylinder Compressed air and
air consumption
0.5MPa (0.5kgf/F), 10NR/min
Lubrication JUKI New Defrix Oil No.1 (equivalent to ISO VG7) Cylinder-bed diameter 180mm Weight of the machine head 34.5kg 36.5kg
Without automatic thread trimmer With automatic thread trimmer
DLN6390S DLN6390S7W0
Application Code Standard S
Application Code Standard S
Wiper and automatic reverse feed function Wiper
Automatic reverse feed function
Code
Provided Not provided W0
Option Code
Not provided Z With needle cooler A
1
www.egemakine.com.tr
DLN-6390, DLN-6390-7 (September, 2003) 2/2
DEVICE CONFIGURATIONS BY MODEL
DEVICE CONFIGURATIONS BY MODEL
OPTIONS
Needle cooler
The needle cooler helps reduce the occurrence of thread breakage caused by needle heat when sewing is performed at a speed of 4,000rpm or more.
The components differ with the type of machine head, i.e, with or without the thread trimmer. Selections should be made by referring to the following table.
DLN-6390 DLN-6390-7
Thread trimmer Provided as standard Manual binder
(coupled to the presser lifter)
Provided as standard
Pneumatic AK device (auto-lifter)
Provided as standard
Pneumatic binder (coupled to the AK device)
Provided as standard
Edge guide Accessory Accessory Mechanical wiper Provided as standard Thread trimmer air blower
Provided as standard
Needle cooler Option Option
Machine head Type Part No.
For DLN-6390
Mechanical valve type, provided with regulator
400-04071
For DLN-6390-7
Solenoid valve type, not provided with regulator
400-04070
Feed rollers, pressers, feed adjusting gears and binders from the UNION SPECIAL 63900 model machine can be attached to the DLN-6390/-6390-7 with no additional machining or adjustments.
Presser foot
1/2" Part No.: 300-31108
Binder
1/2" Part No.: 300-15309
Feed roller
1/2" Part No.: 276-38006 (Top roller) 1/2" Part No.: 276-35705 (Bottom roller)
The shaded portion indicates the factory-attached gear present at the time of delivery. It can be interchanged with other gears supplied with the machine to support four different feed amounts.
Top gear Bottom gear
Feed pitch
JUKI part No.
Engraved marker
JUKI part No.
Engraved marker
Remarks
4.2mm (6 stitch/inch) 300-37600 63949-47 300-37501 63949-33 Option
3.6mm (7 stitch/inch) 300-37303 63949-44 300-37402 63949-36
Supported by the gear supplied with the machine.
3.2mm (8 stitch/inch) 300-33302 63949-41 300-33203 63949-39
Standard factory-attached gear present at the time of delivery
2.8mm (9 stitch/inch) 300-33203 63949-39 300-33302 63949-41
Supported by changing over the factory-attached top and bottom gears.
2.5mm (10 stitch/inch) 300-33104 63949-37 300-33401 63949-43 Option
2.3mm (11 stitch/inch) 300-37402 63949-36 300-37303 63949-44
Supported by the gear supplied with the machine.
2.1mm (12 stitch/inch) 300-37501 63949-33 300-37600 63949-47 Option
Parts provided as standard
Options
Table of feed amount adjustment/conversion gears
Hem width 3/8"
Part No.: 300-31009
Hem width 1"
Part No.: 277-94601
Hem width 1" (asm.)
Part No.: 400-10327
1/2" roller (knurled type)
Part No.: 300-20705 (Top roller)Part No.: 300-32106 (Bottom roller)
1" roller (knurled type)
Part No.: 277-94403 (Top roller)Part No.: 277-94502 (Bottom roller)
www.egemakine.com.tr
DLN-9010 (September, 2003) 1/2
Thanks to the needle-feed mechanism which offers excellent efficiency of feed, the machine ensures accurate stitch pitches (stitch length) as well as preventing slippage of the upper cloth. The bottom feed's locus has been improved to match the needle feed motion, thus the machine produces beautiful seams without stitch gathering, even when it is used for sewing slippery and difficult-to-feed material or for handling a difficult process.
The needle feed mechanism is a so-called "dry type", which does not require oiling. With this mechanism, a highly reliable machine structure, free from oil leakage troubles, has been achieved. The frame, which requires only a minute quantity of lubricating oil, is structured to eliminate oil leakage.
SPECIFICATIONS
Direct-drive, High-speed, Needle-feed, Lockstitch Machine with Automatic Thread Trimmer

DLN-9010

WHEN YOU PLACE ORDERS
DLN9010S
Machine head type Code Standard S
Application Code
For light- to medium-weight materials
S
For heavy-weight materials H
Wiper and automatic reverse feed function Wiper
Automatic reverse feed function
Code
Not provided Provided 0B Provided Provided WB
Device and attachment
Code
Not provided Auto-lifter
(pedal-driven)
AK118
DLN-9010SS-WB/CP-160D
Model name DLN-9010SS DLN-9010SH Application For light- to medium-weight materials For heavy weight materials Max. sewing speed 5,000rpm 4,000rpm Max. stitch length 4.5mm
Needle bar stroke 33mm Lift of the presser foot By hand: 5.5mm, By knee: 15mm(max.), Auto: 10mm
Needle (at the time of delivery)
DB×1 (#11) #9#18 DB×1 (#21) #20#23
For JE:134 (Nm90) Nm65Nm110 For JE:134 (Nm130) Nm120〜Nm160
Hook Automatic-lubricating full-rotary hook Lubrication Minute-quantity lubrication to needle bar and hook Lubricating oil JUKI New Defrix Oil NO.1 (equivalent to ISO VG7) Distance from needle to machine arm 300mm Size of bed 517mm×178mm Bobbin thread winder Built-in the machine head Micro-lifter screw Provided as standard Machine head drive Compact AC servomotor that is directly connected to the main shaft (direct-drive system) Automatic reverse feed function Provided as standard (built-in solenoid type) Power requirement/Power consumption Single-phase 100120V, 200240V, 3-phase 200240V650VA Total weight 87kg
SC910
PSC box Operation panel
Operation panel Code
IP-100B IP100B CP-160D CP160D
Control box Code
Standard S Provided with built-in I/O board A
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-8).
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S
For JUS
,
General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
The maximum sewing speed is 4,000 rpm or less in cases where the maximum stitch length is 3.5 mm or more.
1
www.egemakine.com.tr
DLN-9010 (September, 2003) 2/2
To retrofit the AE-8 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
OPTIONS
Model Description
AK118
AE-8
ED-4
―
Part No.
This switch, mounted on the reverse feed switch, enables handy control of various functions. It is especially effective when operating the machine while standing.
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press, on the front part of the foot pedal. With this function, the operator doesn’t have to look away from the sewing work to check the bobbin thread. (Only supported by the minute-quantity lubricating type machine)
When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
This device can be installed on the back of the face plate. It is very convenient for frequent use.
Feature
400-00380
GAE-080000A0
236-11056
Auto-lifter Optional switch
Remaining bobbin thread detector
Material edge sensor
Micro-lifter (asm.)
www.egemakine.com.tr
DLU-5490N, 5490N-7 (September, 2003) 1/2
DLU-5490N DLU-5490N-7
Remaining bobbin thread detector (AE-4) Material edge sensor (ED-2)
The walking foot provides stable feed at all times, assuring high quality. It also eliminates the need for proficiency.
The top-feed motion ideally synchronized with the bottom-feed motion to uniformly feed the upper and lower cloths, assuring attractive stitches and uniform gathering stitches. This leads to a higher value of finished products.
The maximum top-feed amount is 8mm. The top-feed amount has been increased to assure stable gathering stitches.
DLU-5490N DLU-5490N-7
(with automatic thread trimmer)
1-needle, Bottom and Variable Top-feed Lockstitch Machine
Model
AK85
AE-4
*
ED-2
PF-6
―
Part N o.
GAE-040000A0
112-43763
Description
Auto-lifter Remaining bobbin
thread detector
Material edge sensor
Partial shirring device Micro-lifter (asm.)
Feature
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn’t have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
The partial shirring device permits very easy shirring. This device can be installed on the back of the faceplate. It is very convenient for frequent use.
OPTIONS
To retrofit the AE-4 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
SPECIFICATIONS
Model name Max. sewing speed Max. stitch length Max. top-feed amount Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil Automatic reverse feed function
Power requirement
Power consumption Weight
4,500rpm
5mm 8mm
30.7mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#14), For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
― ―
Machine head: 30kg
Provided as standard
Single-phase 100120V, 200〜240V 3-phase 200〜240V
650VA
Total weight: 83kg
DLU-5490N-7-WB/CP-160A
1
www.egemakine.com.tr
DLU-5490N, 5490N-7 (September, 2003) 2/2
WHEN YOU PLACE ORDERS
Note ● When using the gauges L, M & N, attach them to the binder, etc.
Since the prices are separate, please ask us of them.
Various gauges other than those shown are also available
.
DLU5490N
Application
For light-weight materials For medium-weight materials For heavy-weight materials For edge welt seam
topstitching To prevent it from catching
materials For sewing sharp curves
Application
For elastic materials For setting zipper (right) For binding For bottom hemming For piping For zipper attaching (left) For preventing puckering
Code
BA BB BC
C
CG
D
Code
E
J
L
M
N
P S
DLU5490N 7
Code
Auto-lifter
(optional)
Not provided Provided
(AK85)
AK
Wiper and automatic reverse feed function
Not provided Provided
Wiper
Automatic reverse feed function
Provided Provided
Code
0B
WB
SC910
M91S
PSC box Motor for SC
Control box Code
Standard S Provided with built-in I/O board A
Pulley belt Code Standard S
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-4).
Operation panel
Operation panel Code
IP-100C IP100C CP-160A CP160A
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S For JUS*, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
www.egemakine.com.tr
DLU-5494N-7/IP-100C (July, 2004) 1/2
DLU-5494N-7-WB/IP-100C
1-needle, Bottom and Variable Top-feed, Lockstitch Machine with Automatic Thread Trimmer and Program Shirring Control Device
SPECIFICATIONS
The machine enables even inexperienced operators to perform shirring operation smoothly and easily.
The microcomputer-controlled shirring mechanism allows even inexperienced operators to carry out shirring operations skillfully, producing high-quality products with consistency. While shirring, an operator can enter a program through the use of the teaching function, thereby duplicating a high-quality shirring operation performed program by a skilled operator.

DLU-5494N-7/IP-100C

DLU-5494N-7/IP-100C
4,000rpm (normal 3,500rpm)
5mm (normal feed), 3mm (reverse feed)
8mm
(top-feed amount varies depending on the type of gauge)
30.7mm
By hand: 5.5mm, By knee: 13mm (max.)
DB×1 (#14), For JE: 134 (Nm75)
Automatic-lubricating full-rotary hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Provided as standard
Single-phase 100〜120V, 200240V, 3-phase 200〜240V
Power rating 400VA
83kg
Model name Max. sewing speed Max. stitch length
Max. top-feed amount Needle bar stroke
Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil Automatic reverse feed function Power requirement Power consumption Total weight
TARGETED INDUSTRIAL APPLICATIONS AND PROCESSES
Targeted industrial
applications
Men's and ladies' suits Blazer coats Coats Blousons Slacks Skirts Baby clothes Men's shirts Blouses Dresses One-piece dresses Sportswear Sweaters Others
Processes
1) Runstitching process
Runstitch front edge, join shoulder, sew center of back, seam side, attach sleeve, etc.
2) Topstitching process
Topstitch front edge, topstitch sleeve cuff, topstitch collar, topstitch waistband, etc.
3) Gathering process
Attach yoke, attach cuff, join top and bottom, etc.
4) Sewing process with attachment used in combination with the machine
Hem bottom, piping, binding, etc.
5) Others
Zipper-attachment process, blind­stitching process, sewing processes in which different materials are used in combination, etc.
MEN'S AND LADIES' JACKETS
BLOUSES SKIRTS BABY CLOTHES
Seam side
Seam side/Join shoulder/
Attach sleeve
Topstitch waistband/
Hem bottom
Gathering
Join shoulder
The machine is ready to be used for broader applications, such as men's wear, ladies' wear, jackets and baby clothes, increasing facility efficiency.
1
www.egemakine.com.tr
DLU-5494N-7/IP-100C (July, 2004) 2/2
IT-supporting operation panel IP-100C Indication panel
Control box/Compact servomotor unit SC-910/M91
WHEN YOU PLACE ORDERS
OPTIONS
DLU5494N 7 / /
SC910 S M91S
Part N o.
GAE-040000A0
MAH062000A0 MAZ061000A0
Model
AK85
AE-4
H062 Z061
Description
Auto-lifter Remaining bobbin
thread detector
Stitch guide Separating plate
Feature
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread.
―
PSC box
PSC box Code
For JUS (LA)
Single-phase 100〜120V S For JUS*, General Export 3-phase 200240V D For General Export Single-phase 200240V K For EU (CE) Single-phase 200240V N For China Single-phase 200240V U
Control box Code
Standard S
Pulley belt Code Standard S
JUS: North America and Central and South America
Motor for SC
Gauge set
Application
For medium-weight materials (standard)
Code
BB
*
Code
0B
WB
Code
AK85
Code
H062/Z061
Attachment
(optional)
Not provided Stitch guide and
Separating plate
Auto-lifter
(optional)
Not provided Provided (AK85)
Various gauges other than those
shown are also available.
Wiper and automatic reverse feed function
Wiper
Not provided Provided
Automatic reverse feed function
Provided Provided
The machine is delivered in five units as described below.
5
4
3
2
1
Machine head (DLU-5494N-7) Control box (SC-910) Motor (M91) Operation panel (IP-100C) SC-910/IP-100C supporting kit (KT-01)
Stitch guide H062 Separating plate Z061
www.egemakine.com.tr
DLD-5430N, 5430N-7 (September, 2003) 1/2
DLD-5430N DLD-5430N-7
Remaining bobbin thread detector (AE-4) Gathering attachment (Q036)Material edge sensor (ED-2)
With optional devices such as a partial shirring device (PF-7) and gathering attachment mounted on the machine, beautiful gathers can be sewn with enhanced efficiency. This new, upgraded-quality machine provides not only operating comfort, but also dramatically improved seam quality, fur ther cost reduction, and excellent productivity.
The thread take-up mechanism, thread path components and differential feed mechanism have all been improved. Thanks to these improvements, partial shirring can be performed with minimum tension applied to the material, thus leading to greater flexibility in responding to different types of material.
DLD-5430N DLD-5430N-7
(with automatic thread trimmer)
1-needle, Differential-feed, Lockstitch Machine
Model
AK85
AE-4
*
ED-2
PF-7 Q036
―
Part N o.
GAE-040000A0
― ―
112-43763
Description
Auto-lifter Remaining bobbin
thread detector
Material edge sensor
Partial shirring device Gathering attachment Micro-lifter (asm.)
Feature
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn’t have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
The partial shirring device permits very easy shirring. For high-quality gathering, both effectively and consistently. This device can be installed on the back of the faceplate. It is very convenient for frequent use.
OPTIONS
To retrofit the AE-4 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
SPECIFICATIONS
Model name Max. sewing speed Max. stitch length Max. top-feed amount Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil Automatic reverse feed function
Power requirement
Power consumption Weight
4,500rpm
5mm
Shirring 1:1.5 (max. 1: 3
), Stretching 1:0.5
30.7mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#14), For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
― ―
Machine head: 29kg
Provided as standard
Single-phase 100120V, 200〜240V 3-phase 200〜240V
650VA
Total weight: 82kg
This ratio applies provided that the stitch length does not exceed 2.5mm.
DLD-5430N-7-WB/CP-160A
1
www.egemakine.com.tr
DLD-5430N, 5430N-7 (September, 2003) 2/2
WHEN YOU PLACE ORDERS
DLD5430N7
Code
Auto-lifter
(optional)
Not provided Provided (AK85)
AK
Wiper and automatic reverse feed function
Not provided Provided
Wiper
Automatic reverse feed function
Provided Provided
Code
0B
WB
SC910
M91S
PSC box Motor for SC
Control box Code
Standard S Provided with built-in I/O board A
Pulley belt Code Standard S
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-4).
Operation panel
Operation panel Code
IP-100C IP100C CP-160A CP160A
PSC box Code
For JUS(LA)
Single-phase 100〜120V PFL S
For JUS
, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
www.egemakine.com.tr
DLM-5200N, 5210N (September, 2003) 1/2
DLM-5200N
DLM-5200N
4,500rpm
5mm (normal/reverse feed)
DLM-5210N
Front k nife type
4,000rpm
4mm (normal/reverse feed)
The highly efficient lockstitch machine which assures the consistent quality of finished seams comes with a sharp knife capable of cutting various types of material.
The DLM-5200N series is composed of high-quality sewing machines provided with these two main features, both of which are designed to significantly upgrade the functions.
The knife is designed so that the angle can be changed as desired, allowing the knife to be easily applied to any type of material.
The knife can be attached by simply pressing the presser plate on the machine arm. The knife is removed also by the simple operation of the knob. Thus the type of stitching, such as with or without knife, can be changed with ease.
The adjustment of the needle and needle gauge can be made by the simple change of the sub-gauges.
DLM-5200N DLM-5210N
(exclusive machine for piping)
1-needle, Lockstitch Machine with Edge Trimmer
WHEN YOU PLACE ORDERS
SPECIFICATIONS
DLM5200N
Distance between the needle and the knife
3.2mm (1/8") standard
2.4mm (3/32")
4.0mm (5/32")
4.8mm (3/16")
6.4mm (1/4")
9.5mm (3/8")
N011 N015
N011
5mm 6mm 7mm
N015 Code
A B C E9.5mm
Code
D C E F H
M
Rolled hem Clean finish, top and bottom
DLM5210N/N01
Model name
Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Max. thickness of the material to be cut Lubrication Lubricating oil Weight of the machine head
30.7mm
By hand: 4mm, By knee: 10mm
DB×1 (#14), For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
4mm
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
30kg
Type of binder Finished widthSub-gauge type Code
1
www.egemakine.com.tr
DLM-5200N, 5210N (September, 2003) 2/2
10mm
1mm
1mm
C
D
E
F
H
M
2.4mm (3/32")
3.2mm (1/8")
4.0mm
(5/32")
4.8mm
(3/16")
6.4mm (1/4")
9.5mm (3/8")
113-46004
113-46004
113-46004
113-46004
113-46004
113-46103
B1115-530-0AD
B1115-530-0AD
B1115-530-0AF
B1115-530-0AF
B1115-530-0AF
B1115-530-0AM
B1190-522-X00
B1190-522-S00
B1190-522-Y00
B1190-522-T00
B1190-522-U00
B1190-522-V00
113-46905
113-46905
113-46905
113-46905
113-47101
113-47309
113-46400
113-46400
113-46400
113-46400
113-46509
113-46509
B1524-522-NB0A
B1524-522-NB0A
B1524-522-NB0A
B1524-522-NB0A
B1524-012-0BA
B1524-012-0BA
B1613-522-N00A
B1613-522-N00A
B1613-522-N00A
B1613-522-N00A
B1613-522-W00A
B1613-522-W00A
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
CA
HA
K
2.0mm
(5/64")
6.4mm (1/4")
7.9mm
(5/16")
113-46004
113-46004
113-46103
B1115-530-0AD
B1115-530-0AF
B1115-530-0AM
B1190-522-Y0A
B1190-522-U0A
B1190-522-Y0B
113-46905
113-47101
113-47101
113-46400
113-46509
113-46509
B1524-522-NB0A
B1524-012-0BA
B1524-012-0BA
B1613-522-N00A
B1613-522-A0A
B1613-522-W00A
B4121-522-000
B4121-522-000
B4121-522-000
Specifications
of the
sub-gauge
N011 Semi-fold Binder (cut-before knife, rolled hem) Exclusive sub-gauge
Gauge
width
Rolled hem
Throat plate
Throat plate cover (asm.)
Gauge
Throat plate
chip guard
Chip guide
Hinging presser
(asm.)
Feed dog
Knife
DLM-5200N
DLM-5210N/ N011, N015
N011
N015
This is made to order as an auxiliary part only
Finished width
7mm 6mm 5mm
Tape width
24mm 22mm 20mm
Part No. of the
attachment
MAN-0110G-0A0
MAN-0110F-0A0
MAT-11801-NA0
Gauge
B1190-523-C00 B1190-523-B00 B1190-523-000
Presser foot (asm.)
B1524-523-CA0 B1524-523-BA0 B1524-523-0A0
Front knife
B4121-523-B00 B4121-523-000 B4121-523-000
Finished width
N015 Binder (clean finish, top and bottom) Exclusive sub-gaugeClean finish, top and bottom
Finished width
9.5mm 7mm 6mm 5mm
Tape width
34mm 26mm 22mm 20mm
Part No. of the
attachment
MAN-0150J-0A0
MAN-0150G-0A0
MAN-0150F-0A0
MAT-11901-NA0
Gauge
B1190-523-E00 B1190-523-C00 B1190-523-B00 B1190-523-000
Presser foot (asm.)
B1524-523-EA0 B1524-523-CA0 B1524-523-BA0 B1524-523-0A0
Front knife
B4121-523-B00 B4121-523-B00 B4121-523-000 B4121-523-000
Finished width
SUB-GAUGE SET LIST
ATTACHMENTS
www.egemakine.com.tr
DLM-5400N-7, DMN-5420N-7 (September, 2003) 1/3
DLM-5400N-7
4,500rpm
Bottom-feed
4mm (normal/reverse feed)
83kg
DMN-5420N-7
5,000rpm
(max. 4,000rpm with the stitch
length set to 4mm or more)
Needle-feed
5mm (normal feed), 3mm (reverse feed)
84kg
DLM-5400N-7
The knife is capable of cutting any kind of material regardless of its thickness or toughness, including heavy-weight material, elastic material and brushing material.
Since the knife lever has been plasted so as to prevent rust, there is no need to worry about the material becoming soiled with rust.
The thread trimmer is designed to cut various threads of different thicknesses, so the range of the applicable thread thickness number has been widened. The thread trimmer can therefore cut even a thick thread with ease.
The cloth trimming knife has been designed so that it can move as much as 5.5mm toward you from the center of the needle.
DMN-5420N-7
SPECIFICATIONS
Model name
Max. sewing speed
Feed system Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Max. thickness of the material to be cut Lubrication Lubricating oil Automatic reverse feed function Power requirement Power consumption Total weight
30.7mm
By hand : 5.5mm, By knee : 10mm
DB×1 (#14) #9#18, For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
4mm
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Provided as standard
Single-phase 100120V, 200240V, 3-phase 200〜240V
650VA
OPTIONS
To retrofit the AE-4 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
Model
AK85
AE-4
ED-2
Part N o.
GAE-040000A0
―
Feature
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn’t have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches.
Description
Auto-lifter Remaining bobbin
thread detector
Material edge sensor
DLM-5400N-7-WB/CP-160A
1-needle, Bottom-feed, Lockstitch Machine with Vertical Edge Trimmer and Automatic Thread Trimmer
1-needle, Needle-feed, Lockstitch Machine with Vertical Edge Trimmer and Automatic Thread Trimmer
1
www.egemakine.com.tr
DLM-5400N-7, DMN-5420N-7 (September, 2003) 2/3
DLM5400N 7
Code
AK
Auto-lifter (optional)
Not provided Provided (AK85)
WHEN YOU PLACE ORDERS
Distance between the needle and the knife
3.2mm (1/8") standard
2.4mm (3/32")
4.0mm (5/32")
4.8mm (3/16")
6.4mm (1/4")
9.5mm (3/8")
Code
D C E
F
H
M
DMN5420N 7
Code
AK
Auto-lifter (optional)
Not provided Provided (AK85)
Code
A B
Feed dog
Standard Coarse feed dog
Distance between the needle and the knife
3.2mm (1/8") standard
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
9.5mm (3/8")
Code
D E
F G H
M
Wiper and automatic reverse feed function
Not provided
Provided
Wiper
Automatic reverse feed function
Not provided Provided Provided
Code
00
0B
WB
Sub-gauge type
Sub-gauge type
Wiper and automatic reverse feed function
Not provided Provided
Wiper
Automatic reverse feed function
Provided Provided
Code
0B
WB
SC910
M91S
PSC box Motor for SC
Control box Code
Standard S Provided with built-in I/O board A
Pulley belt Code Standard S
Control box provided with built in I/O board (Code A) should be selected for the machine head equipped with the remaining bobbin thread detector (AE-4).
Operation panel
Operation panel Code
IP-100C IP100C CP-160A CP160A
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S For JUS*, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
www.egemakine.com.tr
DLM-5400N-7, DMN-5420N-7 (September, 2003) 3/3
DLM-5400N-7
This is made to order as an auxiliary part only.
 *Knife support replacement B4118-530-00A knife attaching block replacement B4119-530-00A are also available. **Wiper cannot be attached to the C and CA type of sub-gauges.
**
**
*
DMN-5420N-7
This is made to order as an auxiliary part only.
 *Be sure to use this gauge with the stitch length set to 2mm or less. **Be sure to use this gauge with the stitch length set to 2.5mm or less. ★ Wiper cannot be attached to the CA and DA type of sub-gauges.
**
★★
★★Coarse feed dog
*
★
★
**
Hinging presser
(asm.)
Chip guide Feed dog
Throat plate cover (asm.)
Throat plate
Throat plate
chip guard
Gauge
B1524-530-DB0 B1524-530-DB0 B1524-530-EB0 B1524-530-EB0 B1524-530-GB0 B1524-530-GB0
B1613-522-N00A B1613-522-N00A B1613-522-N00A
B1613-522-N00A B1613-522-W00A B1613-522-W00A
113-46400 113-46400 113-46400 113-46400 113-46509 113-46509
B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000
Knife
113-46905 113-46905 113-46905 113-46905 113-47101 113-47309
B1115-531-0AD B1115-531-0AD B1115-531-0AD B1115-530-0AF B1115-530-0AF B1115-530-0AM
2.4mm (3/32")
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
6.4mm (1/4")
9.5mm (3/8")
B1190-522-X00 B1190-522-S00 B1190-522-Y00 B1190-522-T00 B1190-522-U00 B1190-522-V00
Specifications
of the
sub-gauge
C D
E F
H
M
Gauge
width
113-46004 113-46004 113-46004 113-46004 113-46004 113-46004
Chip guide
Throat plate
chip guard
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
9.5mm (3/8")
Gauge
Throat plate cover (asm.)
Gauge
width
Specifications
of the
sub-gauge
Hinging presser
(asm.)
Throat plate
D
E
F
G
H
M
113-46004
113-46004
113-46004
113-46004
113-46103
113-46103
Feed dog
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B1609-530-D00 B1609-530-E00 B1609-530-D00 B1609-530-E00 B1609-530-D00 B1609-530-E00 B1609-530-G00 B1609-530-H00 B1609-530-G00 B1609-530-H00 B1609-530-G00 B1609-530-H00
Knife
113-46905
113-46905
113-46905
113-47101
113-47101
113-47309
B1115-531-0AD
B1115-530-0AF
B1115-530-0AF
B1115-530-0AF
B1115-530-0AF
B1115-530-0AM
B1524-530-DB0
B1524-530-EB0
B1524-530-EB0
B1524-530-GB0
B1524-530-GB0
B1524-530-GB0
B1190-530-D00
B1190-530-E00
B1190-530-F00
B1190-530-G00
B1190-530-H00
B1190-530-M00
113-46400
113-46400
113-46400
113-46400
113-46509
113-46509
B1524-530-CB0 B1524-530-DB0 B1524-530-EB0 B1524-530-EB0 B1524-530-EB0 B1524-530-GB0 B1524-530-GB0 B1524-530-GB0 B1524-530-GB0 B1524-530-GB0
113-46400 113-46400 113-46400 113-46400 113-46400 113-46400 113-46509 113-46509 113-46509 113-46608
B1613-522-N00A
B1613-522-N0C B1613-522-N00A B1613-522-N00A B1613-522-N00A B1613-522-N00A B1613-522-A0AA
B1613-522-W00A B1613-522-B00 B1613-522-W00A
B4145-530-C00 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000 B4121-522-000
113-46905 113-46905 113-46905 113-46905 113-46905 113-47101 113-47101 113-47101 113-47309 113-47309
B1190-522-Y0A B1190-522-X0B
113-62753 B1190-522-T0A B1190-522-Y0C B1190-522-Y0F B1190-522-U0AA B1190-522-Y0B B1190-522-V0A B1190-522-Y0M
2.0mm (5/64")
2.4mm (3/32")
4.0mm (5/32")
4.8mm (3/16")
4.8mm (3/16")
5.3mm
(27/128")
6.4mm (1/4")
7.9mm (5/16")
9.5mm (3/8")
11.1mm
(7/16")
CA CB EA
FA FB
G
HA
K
MA
P
B1115-531-0AD B1115-531-0AD B1115-531-0AD B1115-530-0AF B1115-530-0AF B1115-530-0AF B1115-530-0AF B1115-530-0AF B1115-530-0AM B1115-530-0AM
113-46004 113-46004 113-46004 113-46004 113-46004 113-46004 113-46301 113-46004 113-46004 113-46004
113-46004
113-46004
113-46004
113-46004
113-46103
113-46103
113-46103
B1115-531-0AD
B1115-531-0AD
B1115-531-0AD
B1115-530-0AD
B1115-530-0AF
B1115-530-0AF
B1115-530-0AM
2.0mm(5/64")
2.8mm(7/64")
3.2mm(1/8")
3.2mm(1/8")
7.5mm(9/32")
7.5mm(19/64")
7.9mm(5/16")
B1190-530-C0A
B1190-522-D0A
B1190-530-D0C
B1190-530-D0B
B1190-530-J00
B1190-530-J0A
B1190-530-K00
CA
DA
DC
DD
J
JA
K
B1609-530-C0A B1609-530-D00
B1609-530-E00 B1609-530-D0E
B1609-530-J00
B1609-530-G00 B1609-530-H00 B1609-530-G00 B1609-530-H00 B1609-530-G00 B1609-530-H00
B4121-530-C00
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B4121-522-000
B1524-530-CB0
B1524-530-DB0
B1524-530-DB0
B1524-530-DBA
B1524-530-GB0
B1524-530-GB0
B1524-530-GB0
113-46905
113-46905
113-46905
113-46905
113-47101
113-47101
113-47309
113-46400
113-46400
113-46400
113-46400
113-46509
113-46509
113-46509
SUB-GAUGE SET LIST
SUB-GAUGE SET LIST
1
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 1/12
The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch sk ipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.
2-needle, Needle-feed, Lockstitch Machine
LH-3128 LH-3128-7
(with automatic thread trimmer)
The organized split needle bar mechanism makes it possible to stop or reset the left or right needle by operating a one-touch utility lever.
The machine produces neatly finished stitches at corner parts of the material.
Improved thread tension and presser foot dramatically upgrades the seam adjusting ability. The range of thread counts that can be used is widened.
2-needle, Needle-feed, Lockstitch Machine with Organized Split Needle Bar and Large Hooks
LH-3188 LH-3188-7
(with automatic thread trimmer)
The machine has adopted a bottom-feed mechanism. This enables the machine to perform sewing with a low tension applied to the material while preventing puckering and stitch skipping, thereby improving consistency of seam quality.
The machine is capable of adapting to the sewing of light-weight materials and newly-developed materials. This means that the machine is exceedingly effective to the process to sew top center plaits of shirts and the sewing of foundation.
2-needle, Bottom-feed, Lockstitch Machine
LH-3120
Our investigation of the thread take-up stroke and other mechanisms results in the reduction of irregular stitches. Even at high speed, the machine performs sewing as consistently as the standard hook machine. The machine can make the most out of the advantageous features of the large hook, upgrading the finished quality of heavy-weight materials and improving efficiency.
2-needle, Needle-feed, Lockstitch Machine with Large Hooks
LH-3178 LH-3178-7
(with automatic thread trimmer)
The organized split needle bars which enable either the left or right needle to stop independently of the other can be changed over by simply operating the lever, thereby saving labor in corner stitching.
2-needle, Needle-feed, Lockstitch Machine with Organized Split Needle Bar
LH-3168 LH-3168-7
(with automatic thread trimmer)
LH-3128-7-WB/CP-160B
LH-3188-7-WB/CP-160B
LH-3120
2
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 2/12
SPECIFICATIONS
Without automatic thread trimmer
With automatic thread trimmer
Model name
Feed system Application Max. sewing speed
Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook Needle
(at the time of delivery) Organized split needle bar mechanism Lubrication Lubricating oil Distance from needle to machine arm Bed size Weight of the machine head
Model name
Feed system Application Max. sewing speed
Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook Needle
(at the time of delivery) Organized split needle bar mechanism Lubrication Lubricating oil Distance from needle to machine arm Bed size Weight of the machine head Power requirement
Power consumption
LH-3120A LH-3128A LH-3128S LH-3128G
Bottom-feed Needle-feed
For light-weight For light-weight For medium-weight For jeans and
materials materials materials heavy-weight materials
3,000rpm
4mm (normal/reverse feed)
5mm (normal/reverse feed)
Slide type
33.4mm
By hand: 5.5mm, By knee: 12mm
Vertical-axis regular hook
DP×5 (#9) #9#14 DP×5 (#9) #9#14 DP×5 (#14) #11#18 DP×5 (#21) #18#22
Not provided
Fully automatic lubrication system by means of plunger pump
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
245mm
517mm×178mm
38kg
Model name
Feed system Application Max. sewing speed
Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook Needle
(at the time of delivery) Organized split needle bar mechanism Lubrication Lubricating oil Distance from needle to machine arm Bed size Weight of the machine head
Model name
Feed system Application Max. sewing speed
Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook Needle
(at the time of delivery) Organized split needle bar mechanism Lubrication Lubricating oil Automatic reverse feed function Distance from needle to machine arm Bed size Weight of the machine head Power requirement
Power consumption
LH-3168A LH-3168S LH-3168G LH-3178S LH-3178G LH-3188G
Needle-feed
For light-weight For medium-weight For jeans and For medium-weight For jeans and
materials materials heavy-weight materials materials heavy-weight materials
3,000rpm
5mm (normal/reverse feed)
Slide type
33.4mm
By hand: 5.5mm, By knee: 12mm
Vertical-axis regular hook Vertical-axis double-capacity hook
DP×5 (#9) #9#14 DP×5 (#14) #11#18 DP×5 (#21) #18#22 DP×5 (#14) #11#18 DP×5 (#21) #18#22
Provided as standard Not provided Provided as standard
Fully automatic lubrication system by means of plunger pump
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
245mm
517mm×178mm
38kg
LH-3128A-7 LH-3128S-7 LH-3128G-7
Needle-feed
For light-weight For medium-weight For jeans and
materials materials heavy-weight materials
3,000rpm
5mm (normal/reverse feed)
Slide type
33.4mm
By hand: 5.5mm, By knee: 12mm, By knee lifter with wiper: 9mm
Vertical-axis regular hook
DP×5 (#11) #11#14 DP×5 (#14) #11#18 DP×5 (#21) #18#22
Not provided
Fully automatic lubrication system by means of plunger pump
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
245mm
517mm×178mm
43kg
Single-phase 100〜120V, 200240V, 3-phase 200〜240V/650VA
LH-3168A-7 LH-3168S-7 LH-3168G-7 LH-3178S-7 LH-3178G-7 LH-3188G-7
Needle-feed
For light-weight For medium-weight For jeans and For medium-weight For jeans and
materials materials heavy-weight materials materials heavy-weight materials
3,000rpm
5mm (normal/reverse feed)
Slide type
33.4mm
By hand: 5.5mm, By knee: 12mm, By knee lifter with wiper: 9mm
Vertical-axis regular hook Vertical-axis double-capacity hook
DP×5 (#11) #11#14 DP×5 (#14) #11#18 DP×5 (#21) #18#22 DP×5 (#14) #11#18 DP×5 (#21) #18#22 DP×5 (#21) #18#22
Provided as standard Not provided Provided as standard
Fully automatic lubrication system by means of plunger pump
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Provided as standard
245mm
517mm×178mm
43kg
Single-phase 100〜120V, 200240V, 3-phase 200〜240V/650VA
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 3/12
With automatic thread trimmer
LH31 7
SC 910 S
Spec.
Model name
Needle gauge
Code
28 68
78 88
Type
Needle-feed Needle-feed with organized split
needle bar Needle-feed with large hooks Needle-feed with organized split
needle bar and large hooks
Code
A S
G
Application
For light-weight materials For medium-weight materials For jeans and heavy-weight
materials
Code
Code
89
Auto-lifter
Not provided Pedal switch type
(AK89)
WHEN YOU PLACE ORDERS
Wiper and automatic reverse feed function
Not provided
Provided
Wiper
Automatic reverse feed function
Not provided Provided Not provided Provided
Code
00
0B W0 WB
A S G A S G S G G
mm inch
LH-3128-7
LH-3168-7
LH-3178-7
LH-3188-7
Gauges marked () are standard type. Please contact us for any gauge which is not included in the above table.
ABCDEFGHK
2.4 3.2 4.0 4.8 5.6 6.4 7.1 7.9 9.5
3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 3/8
○ ○○○○◎○○○  ○ ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○  ○ ○ ○ ○ ◎ ○ ○ ○  ○ ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○  ○ ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○
WLMNPQRS
11.1 12.7 15.9 19.1 22.2 25.4 28.6 31.8
7/16 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4
○ ○○○○○○○ ○ ○○○○○○○ ○ ○○○○○○○  ○ ○ ○ ○  ○ ○ ○ ○  ○ ○ ○ ○  ○ ○ ○ ○  ○  ○
M91S
PSC box Motor for SC Operation panel
Pulley belt Code Standard S
JUS: North America and Central and South America.
Operation panel Code
IP-100B IP100B CP-160B CP160B
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S
For JUS
*,
General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
Control box Code Standard S
2
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 4/12
Without automatic thread trimmer
Code
20 28
68
78 88
Type
Bottom-feed Needle-feed Needle-feed with organized split
needle bar Needle-feed with large hooks Needle-feed with organized split
needle bar and large hooks
Code
A
S
G
Application
For light-weight materials For medium-weight materials For jeans and heavy-weight
materials
Spec.
Model name
Needle gauge
Code
A A
S G A
S G
S G G
mm inch
LH-3120
LH-3128
LH-3168
LH-3178
LH-3188
Gauges marked () are standard type. Please contact us for any gauge which is not included in the above table.
Model Part No. Description Feature
AK89
V059
AT-36
―
MAV-059000AA
226-56854
232-09059
Auto-lifter
Tension-free feeder (tape feeder)
Tape cutter
Automatic reverse feed kit
Micro-lifter
The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation.
The tape cutter is able to cut the tape just behind the presser foot (20mm away from the needle entry point). The cutter pressure is adjustable according to the material thickness.
The automatic reverse feed function device can be mounted on the machine after the setup. (*Synchronizer not included.)
This device can be installed on the back of the face plate. It is very convenient for frequent use.
OPTIONS
LH31
ABCDEFGHK
2.4 3.2 4.0 4.8 5.6 6.4 7.1 7.9 9.5
3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 3/8
 ○ ○ ◎ ○ ○○○○◎○○○  ○ ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○  ○ ○ ○ ○ ◎ ○ ○ ○  ○ ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○  ○ ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○  ○ ○ ◎ ○ ○ ○
WLMNPQRSTU
11.1 12.7 15.9 19.1 22.2 25.4 28.6 31.8 34.9 38.1
7/16 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2
 ○ ○ ○ ○ ○ ○○○○○○○○○ ○ ○○○○○○○○○ ○ ○○○○○○○○○  ○ ○ ○ ○  ○ ○ ○ ○  ○ ○ ○ ○  ○ ○ ○ ○ ○ ○ ○ ○  ○ ○ ○ ○ ○ ○  ○
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 5/12
ATTACHMENTS
Garment
Pocket bag
Interlining
Name
(Code No.)
Application and
seam specifications
Applicable
machines
Name
(Code No.)
Application and
seam specifications
Applicable
machines
Top center plait hemmer (mousetrap latch type)
(L030)
Pocket hemmer sewing type
(L032)
Downturn hemmer
(L045)
Pocket binder (clean finish top and bottom)
(N054)
Top center plait (folder)
(M315)
Center plait folder (from neck down)
(M037)
Right feed piping folder
(M137)
Pajama piping folder
(M163)
Belt folder (turnable mousetrap latch type)
(N012)
Lapping seam folder
(M170)
Lapping seam folder (reverse)
(M171)
Left feed top stitch folder
(M024)
Right feed top stitch folder
(M025)
Tape attaching foot with center guide
(B006)
Sewing edge guide
(H010)
Sewing roller guide
(H011)
Presser foot with guide
(B009)
Compensating presser foot
(B020)
Box pleats folder (small type)
(M009)
Zipper guide
(Q090)
Zipper folder
(S004B)
For making top center plait on men’s shirts and hemming seats bed covers, etc.
For hemming side pocket mouth of jeans, work uniforms etc. and hemming bottom of pants
For sewing outside pocket mouth of jeans, work uniforms, etc.
To tape attaching process to bind edges of pocket bags of slacks, pants, skirts, etc.
For attaching formal top center plait on men’s shirts, etc.
For making front facing from the neck side.
To the process for sewing decorative pipings on sports wear, work uniforms, etc.
For sewing pipings on the edges of pockets, top-center plaits, bottoms, sleeves, etc. of pajamas.
For making belts including shoulder straps of children’s rompers, belts of ladies’ overcoats etc.
For lapping seam in the various joining process including joining sides of jeans, work uniforms, pantalons etc.
For lapping seam in the various joining process including seaming sides of jeans, work uniforms, pantaloons etc.
For seaming sides
For seaming sides
For opening seam of brassieres, body suits etc.
Edge guide applicable to runstitching process and decorative stitching process
Edge guide for runstitch process using vinylcoated cloth or man-made leather.
Lapping seam process and counterstitching process for denim, drill, wool, gabardine, etc.
For making top canter plaits of knit shirts, blouses, etc. and for making belts of ladies’ wear
For sewing box pleats of skirts, box pleats at the back center of ladies’ overcoats, sewing box pleats of office uniforms, work uniforms, etc.
For runstitching left fly of pants and zippers
Attaching zippers on skirts, jumpers, matcovers, etc.
The part numbers are designated according to needle gauge and specification.
Be sure to confirm the part number of the attachment you need when placing your order with us.
A type S type
S type G type
S type G type
S type
A type S type
A type S type
S type G type
A type S type
S type G type
S type G type
LH-3128S
S type
LH-3128
S type G type
S type G type
S type G type
S type G type
LH-3128F
A type S type
S type G type
S type G type
S type G type
2
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 6/12
φ1.4
φ1.9
φ2.2
1.6mm
2.0mm
2.0mm
φ1.4
φ2.0
2mm
3mm
A B C D
E
F G H K W
L M N P Q R
S
T U
2.4mm (3/32")
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
11.1mm (7/16")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
22.2mm (7/8")
25.4mm (1")
28.6mm (1-1/8")
31.8mm (1-1/4")
34.9mm (1-3/8")
38.1mm (1-1/2")
Needle gauge size
Code
Throat plate Feed dog Presser foot asm.
Throat plate with
thread trimmer
Needle clamp asm.
226-25008 226-25107 226-25206 226-25305 226-25404 226-25503 226-25602 226-25701 226-25800 226-25909 226-26006 226-26105 226-26204 226-26303 226-26402 226-26501 226-26600 226-26709 226-26808
Spec. common
226-35007 226-30107 226-35205 226-35304 226-35403 226-35502 226-35700 226-35809 226-35908 226-36005 226-36203 226-36302 226-36401 226-36609 226-36708 226-36807 226-36906 226-37003 226-37102
★
226-30206 226-30404 226-30503 226-30602 226-30800 226-30909 226-31006 226-31105 226-31303 226-31402 226-31501 226-31709 226-31808 226-31907 226-32004 226-32103 226-32202
★
B1613-512-D0H
B1613-512-E0H
B1613-512-F0H B1613-512-G0H B1613-512-H0H
B1613-512-K0H
B1613-512-L0H B1613-512-M0H B1613-512-N0H
B1613-512-P0H B1613-512-Q0H
B1613-512-R0H
B1613-512-S0H
B1613-512-T0H B1613-512-U0H
★
226-37557 226-37656 226-37755 226-37854 226-37953 226-38050 226-38258 226-38357 226-38456 226-38555 226-38753 226-38852 226-38951 226-39157 226-39256 226-39355 226-39454 226-39553 226-39652
★
101-52650 101-52759 101-52858 101-52957 101-53054 101-53153 101-53252 101-53351 101-53450 101-53559 101-53658 101-53757 101-53856 101-53955 101-54052 101-54151 101-54250
☆
226-40353 226-40452 226-40551 226-40759 226-40858 226-40957 226-41054 226-41252 226-41351 226-41450 226-41658 226-41757 226-41856 226-41955 226-42052 226-42151
★
226-60104 226-60203 226-60302 226-60401 226-60500 226-60609 226-60708 226-60807 226-60906 226-61003 226-61102 226-61201 226-61300 226-61409 226-61508 226-61607 226-61706
Spec. common
226-65004 226-65103 226-65202 226-65301 226-65440 226-65509 226-65707 226-65806 226-65905 226-66002 226-66200 226-66309 226-66408 226-66606 226-66708 226-66804 226-66903
102-37907 102-38004 102-38103 102-38202 102-38301 102-38400 102-38509 101-68300 102-38707 102-38806 102-38905 102-68706 102-39002 101-68904 101-69001
102-39101 102-39200 102-39309 102-39408 102-39507 102-39606 101-70801 102-39804 102-39903 101-71106 101-71205 101-71304 101-71403 101-71502
101-47551 101-47650 101-47759 101-47858 101-47957 101-48054 101-48153 101-48252 101-48351 101-48450 101-48559 101-48658 101-48757 101-48856 101-48955 101-49052 101-49151 101-49250 101-49359
Spec. common
LH-3128
LH-3128-7
Needle gauge size Feed dog (with thread trimmer)
(tipdivided)
TABLE OF EXCHANGE PARTS FOR LH3100 SERIES
Stitch spec.
S A G
A B C D
E
F G H K W
L M N P Q R
S
T U
2.4mm (3/32")
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
11.1mm (7/16")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
22.2mm (7/8")
25.4mm (1")
28.6mm (1-1/8")
31.8mm (1-1/4")
34.9mm (1-3/8")
38.1mm (1-1/2")
Code
Stitch spec.
S A G
Standard spec. Substandard spec. Special order
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 7/12
Bed Slide asm.
(left)
Bed Slide asm.
(right)
Bed slide asm.
(with thread trimmer)
226-50857
226-50956
226-51053
226-51152
226-50352
226-50451
226-50550
226-50659
Needle gauge size
A
W
L
N
P
Q
S
U
2.4mm (3/32")
11.4mm (7/16")
12.7mm (1/2")
19.1mm (3/4")
22.2mm (7/8")
28.6mm (1-1/8")
31.8mm (1-1/4")
38.1mm (1-1/2")
Code
Front metal Inner metal
B1802-512-0A0A
B1802-512-0AB
B1803-515-0A0
101-12357
Needle gauge size
A
P
Q U
2.4mm (3/32")
22.2mm (7/8")
25.4mm (1")
38.1mm (1-1/2")
Code
LH-3128/3128-7
~
~
~~
~ ~
~
~
~~
~ ~
2
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 8/12
φ1.9
φ1.4
2.0mm
2.0mm
1.6mm
2mm
3mm
φ1.4
φ2.0
φ2.2
B C D
E
F G H K
L M N Q
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
25.4mm (1")
Needle gauge size
Code
Throat plate Feed dog Presser foot asm.
226-25107 226-25206 226-25305 226-25404 226-25503 226-25602 226-25701 226-25800 226-26006 226-26105 226-26204 226-26402
Spec. common
226-30107 226-35205 226-35304 226-35403 226-35502 226-35700 226-35809 226-35908 226-36203 226-36302 226-36401 226-36708
★
226-30206 226-30404 226-30503 226-30602 226-30800 226-30909 226-31006 226-31303 226-31402 226-31501 226-31808
★
B1613-512-D0H
B1613-512-E0H
B1613-512-F0H B1613-512-G0H B1613-512-H0H
B1613-512-K0H
B1613-512-L0H B1613-512-M0H B1613-512-N0H B1613-512-Q0H
★
226-37656 226-37755 226-37854 226-37953 226-38050 226-38258 226-38357 226-38456 226-38753 226-38852 226-38951 226-39256
★
101-52650 101-52759 101-52858 101-52957 101-53054 101-53153 101-53252 101-53450 101-53559 101-53658 101-53856
☆
226-40353 226-40452 226-40551 226-40759 226-40858 226-40957 226-41252 226-41351 226-41450 226-41757
★
LH-3168
LH-3168-7
LH-3168/LH-3168-7
(tipdivided)
Stitch spec.
S A G
B C D
E
F G H K
L M N Q
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
25.4mm (1")
Needle gauge size
Code
Throat plate with
thread trimmer
Feed dog (with thread trimmer)
Needle clamp asm.
Left
226-60203 226-60302 226-60401 226-60500 226-60609 226-60708 226-60807 226-60906 226-61102 226-61201 226-61300 226-61508
Spec. common
226-65103 226-65202 226-65301 226-65400 226-65509 226-65707 226-65806 226-65905 226-66200 226-66309 226-66408 226-66705
★
102-37907 102-38004 102-38103 102-38202 102-38301 102-38400 102-38509 102-38707 102-38806 102-38905 102-39002
★
102-39101 102-39200 102-39309 102-39408 102-39507 102-39606 102-39804 102-39903 101-71106 101-71304
★
B1402-528-BA0A B1402-528-CA0A B1402-528-DALA B1402-528-EAL B1402-528-FAL B1402-528-GAL B1402-528-HALA B1402-528-KALA B1402-528-LAL B1402-528-MAL B1402-528-NAL B1402-528-QAL
Needle clamp asm.
Right
B1402-528-BA0A B1402-528-CA0A B1402-528-DARA B1402-528-EAR B1402-528-FAR B1402-528-GAR B1402-528-HARA B1402-528-KARA B1402-528-LAR B1402-528-MAR B1402-528-NAR B1402-528-QAR
Stitch spec. Spec. common
S A G
Front metal Inner metal
B1802-512-0A0A
B1802-512-0AB
B1803-515-0A0
101-12357
Needle gauge size
B N
Q
1/8" (3.2mm) 3/4" (19.1mm)
1" (25.4mm)
Code
Bed slide asm.
(left)
Bed slide asm.
(right)
Bed slide asm.
(with thread trimmer)
226-50857
226-50956
226-51053
226-50352
226-50451
226-50550
Needle gauge size
B K
L N
Q
3.2mm (1/8")
9.5mm (3/8")
12.7mm (1/2")
19.1mm (3/4")
25.4mm (1")
Code
Standard spec. Substandard spec. Special order
~
~
~
~
~
~
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 9/12
φ1.9
2.4mm
2.0mm
φ2.4
* φ2.2
φ2.4φ2.0
2.0mm
A
B C
D
E
F G H
K
W
L M N
P Q
R
S
T U
2.4mm (3/32")
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
11.1mm (7/16")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
22.2mm (7/8")
25.4mm (1")
28.6mm (1-1/8")
31.8mm (1-1/4")
34.9mm (1-3/8")
38.1mm (1-1/2")
Needle gauge size
Code
Throat plate Feed dog Presser foot asm.
226-25107 226-25206 226-25305 226-25404 226-25503 226-25602 226-25701 226-25800 226-25909 226-26006 226-26105 226-26204 226-26303 226-26402 226-26501 226-26600 226-26709 226-26808
Spec. common
226-30107 226-30206 226-30404 226-30503 226-30602 226-30800 226-30909 226-31006 226-31105 226-31303 226-31402 226-31501 226-31709 226-31808 226-31907 226-32004 226-32103 226-32202
★
228-15401 228-15500 228-15609 228-15708 228-15807 228-15906
228-16003
*B1613-512-Q0H *B1613-512-R0H *B1613-512-S0H *B1613-512-T0H *B1613-512-U0H
★
226-37657 101-52650 101-52759 101-52858 101-52957 101-53054 101-53153 101-53252 101-53351 101-53450 101-53559 101-53658 101-53757 101-53856 101-53955 101-54052 101-54151 101-54250
★
228-16557 228-16656 228-16755 228-16854 228-16953 228-17050
228-17159
226-41757 226-41856 226-41955 226-42052 226-42151
★
LH-3178
LH-3178-7
(tipdivided)
Stitch spec.
S G
A
B
C D
E
F G H
K
W
L M N
P Q
R
S
T U
2.4mm (3/32")
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
11.1mm (7/16")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
22.2mm (7/8")
25.4mm (1")
28.6mm (1-1/8")
31.8mm (1-1/4")
34.9mm (1-3/8")
38.1mm (1-1/2")
Needle gauge size
Code
Throat plate with
thread trimmer
Feed dog (with thread trimmer)
Needle clamp asm.
226-60203 226-60302 226-60401 226-60500 226-60609 226-60708 226-60807 226-60906 226-61003 226-61102 226-61201 226-61300 226-61409 226-61508 226-61607 226-61706
Spec. common
226-65103 102-37907 102-38004 102-38103 102-38202 102-38301 102-38400 102-38509 101-68300 101-38707 102-38806 102-38905 101-68706 102-39002 101-68904 101-69001
★
228-21201 228-21300 228-21409 228-21508 228-21607 228-21706
228-21805
★
101-47650 101-47759 101-47858 101-47957 101-48054 101-48153 101-48252 101-48351 101-48450 101-48559 101-48658 101-48757 101-48856 101-48955 101-49052 101-49151 101-49250 101-49359
Spec. common
Presser foot asm.
102-22255 102-22354 226-40353 226-40452 226-40551 226-40759 226-40858 226-40957
226-41252 226-41351 226-41450
226-41757
★
Stitch spec.
S G
Standard spec.
(tipdivided)
2
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 10/12
D
F
4.8mm (3/16")
6.4mm (1/4")
Needle gauge size
Code
Throat plate (with-
out thread trimmer)
Feed dog (without
thread trimmer)
Throat plate (with
thread trimmer)
Feed dog (with
thread trimmer)
Presser foot asm. Feed dog screw
228-35003 228-35102
228-35557 228-35656
228-35201 228-35300
106-91053 106-98652
B1524-512-DBH B1524-512-FBE
SS6580710TP×2
Bed slide asm.
(left)
Bed slide asm.
(right)
Bed slide asm.
(with thread trimmer)
226-50857
226-50956
226-51053
226-51152
226-50352
226-50451
226-50550
226-50659
Needle gauge size
A W
L
N P
Q
S
U
2.4mm (3/32")
11.4mm (7/16")
12.7mm (1/2")
19.1mm (3/4")
22.2mm (7/8")
28.6mm (1-1/8")
31.8mm (1-1/4")
38.1mm (1-1/2")
Code
Front metal Inner metal
B1802-512-0A0A
B1802-512-0AB
B1803-515-0A0
101-12357
Needle gauge size
A P
Q U
2.4mm (3/32")
22.2mm (7/8")
25.4mm (1")
38.1mm (1-1/2")
Code
LH-3178/3178-7
Chain-off thread gauge
~~~~
~~~~
~~
~~
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 11/12
φ2.4
2.4mm
φ2.4
B
C D
E
F G H
K
L M N Q
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
25.4mm (1")
Needle gauge size
Code
Throat plate Feed dog Presser foot asm.
226-25305 226-25404 226-25503 226-25602 226-25701 226-25800 226-26006
Spec. common
228-15401 228-15500 228-15609 228-15708 228-15807 228-15906 228-16003
★
228-16557 228-16656 228-16755 228-16854 228-16953 228-17050 228-17159
★
LH-3188
LH-3188-7
(tipdivided)
Stitch spec.
S A G
B
C D
E
F G H
K
L M N Q
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
25.4mm (1")
Needle gauge size
Code
Throat plate with
thread trimmer
Feed dog (with
thread trimmer)
Needle clamp asm.
Left
Needle clamp asm.
Right
226-60401 226-60500 226-60609 226-60708 226-60807 226-60906 226-61102
Spec. common
228-21201 228-21300 228-21409 228-21508 228-21607 228-21706 228-21805
★
B1402-528-DALA B1402-528-EAL B1402-528-FALA B1402-528-GAL B1402-528-HALA B1402-528-KALA B1402-528-LAL
B1402-528-DARA B1402-528-EAR B1402-528-FARA B1402-528-GAR B1402-528-HARA B1402-528-KARA B1402-528-LAR
Stitch spec. Spec. common
S A G
Bed slide asm.
(left)
Bed slide asm.
(right)
Bed slide asm.
(with thread trimmer)
226-50857
226-50956
226-51053
226-50352
226-50451
226-50550
Needle gauge size
B
K
L N
Q
3.2mm (1/8")
9.5mm (3/8")
12.7mm (1/2")
19.1mm (3/4")
25.4mm (1")
Code
LH-3188/3188-7
D
F
4.8mm (3/16")
6.4mm (1/4")
Needle gauge size
Code
Throat plate (with-
out thread trimmer)
Feed dog (without
thread trimmer)
Throat plate (with
thread trimmer)
Feed dog (with
thread trimmer)
Presser foot asm. Feed dog screw
228-35003 228-35102
228-35557 228-35656
228-35201 228-35300
106-91053 106-98652
B1524-512-DBH
B1524-512-FBE
SS6580710TP×2
Front metal Inner metal
B1802-512-0A0A
B1802-512-0AB
B1803-515-0A0
101-12357
Needle gauge size
A
P
Q U
2.4mm (3/32")
22.2mm (7/8")
25.4mm (1")
38.1mm (1-1/2")
Code
Chain-off thread gauge
~~
~~
~~
~~
2
www.egemakine.com.tr
LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120 (September, 2003) 12/12
A B C D
E
F G H K W
L M N P Q R
S
T U
2.4mm (3/32")
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
9.5mm (3/8")
11.1mm (7/16")
12.7mm (1/2")
15.9mm (5/8")
19.1mm (3/4")
22.2mm (7/8")
25.4mm (1")
28.6mm (1-1/8")
31.8mm (1-1/4")
34.9mm (1-3/8")
38.1mm (1-1/2")
Needle gauge size
Code
Throat plate Feed dog Presser foot asm.
Needle clamp asm.
228-45200
228-45408
228-45606
★
228-46109
228-46307 228-46406 228-46505
★
228-47206
228-47404
228-47602
★
228-48105
228-48303 228-48402 228-48501
★
103-91852
103-92058
103-92256
103-92751
103-93056 228-44450 228-44559
Spec. common
101-47650
101-47858
101-48054
101-48559
101-48757 101-48856 101-48955
Spec. common
LH-3120
Stitch spec.
A
Bed slide asm.
(left)
Bed slide asm.
(right)
Bed slide asm.
(with thread trimmer)
226-50857
226-50956
226-51053
226-50352
226-50451
226-50550
Needle gauge size
A W
L N
P Q
2.4mm (3/32")
11.4mm (7/16")
12.7mm (1/2")
19.1mm (3/4")
22.2mm (7/8")
28.6mm (1-1/8")
Code
Front metal Inner metal
B1802-512-0A0A
B1802-512-0AB
B1803-515-0A0
101-12357
Needle gauge size
A P
Q U
2.4mm (3/32")
22.2mm (7/8")
25.4mm (1")
38.1mm (1-1/2")
Code
LH-3120
~~
~~
~
~
~
~
~
~
www.egemakine.com.tr
LH-3126F (September, 2003) 1/2

LH-3126F

Model name Max. sewing speed Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook (selectable) Needle (at the time of delivery) Feed system Lubrication Lubricating oil Distance from needle to machine arm Bed size Weight of the machine head
LH-3126F
3,000rpm
4mm (normal /reverse feed)
Slide type
33.4mm
By hand: 5.5mm, By knee: 12mm
Vertical-axis hook (regular fold), specific latch hook or specific hook with non-rotational bobbin
DP×5 (#10) #9#11
Change-over between needle-feed/bottom-feed
Fully automatic lubrication system by means of plunger pump
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
245mm
517mm×178mm
43kg
Operating noise of the machine is dramatically reduced.
The improved opener reduces the impact against the bobbin.
By reducing variations of bobbin thread tension caused by the opener, irregular stitches are eliminated.
The strokes of the right and left thread take-up are separately adjustable.
The adjustment range of the needle thread tension is widened.
The machine is equipped with a hook that uses a non-rotational
bobbin.
Height and inclination of the feed dog can be adjusted.
Through a simple adjustment of the machine and replacement
of the gauge, the feed method can be changed over between the needle-feed and bottom-feed types.
LH-3126F
2-needle, Needle-feed/Bottom-feed, Lockstitch Machine (for foundation)
SPECIFICATIONS
WHEN YOU PLACE ORDERS
Code
B D F G H
Code
A B
Code
1
4*
Code
Z P
Code
0
1
Code
00 0B
Code
S
C
Attachment
Standard throat plate, standard slide plate, standard presser foot
Throat plate for tape-attachment, slide plate for tape-attachment, presser foot for tape-attachment
Combination availability table
Automatic reverse
feed function
0
(not provided)
B
(provided)
Motor
Compatible with clutch motor (without synchronizer and resistor pack)
Compatible with SC-800 and EC-10B (with built-in synchronizer and resistor pack)
Auto-lifter
Not provided
Pedal switch type(AK89)*
Motor
Where "0" is selected Where "1" is selected Where "0" is selected Where "1" is selected
Clutch motor
○ × × ×
SC-910 SC-800
× ○ × ○
EC-10B
× ○ × ○
For the "Bottom-feed: B,"
only the needle gauges B, D, and F are applicable.
For the above category 4, select the feed category A (needle-feed).
For the AK89, select the motor compatibility
category 1 (SC-910, SC-800 or EC-10B).
Refer to the combination availability table.
Refer to the combination
availability table.
LH3126F
Needle gauge
3.2mm (1/8")
4.8mm (3/16")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
Feed
Needle-feed Bottom-feed*
Automatic reverse feed function
Not provided
Provided
Hook
Latch hook Hook with non-rotational bobbin
2
www.egemakine.com.tr
LH-3126F (September, 2003) 2/2
1
2
1.4
1.15
φ1.4
φ1.6
φ2.0 φ2.2
1.7
φ1.4
1.7
1.15
φ1.4
1.7
φ1.4
1.6
1.15
φ1.4
1.7
φ1.4
B
D
F G H
3.2mm (1/8")
4.8mm (3/16")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
Gauge size
Code
Needle clamp
Throat plate
101-47650 101-47858 101-48054 101-48153 101-48252
226-25107 226-25305 226-25503 226-25602 226-25701
232-06808
B1109-512-D0B
B1109-512-F0B B1109-512-G0B B1109-512-H0B
226-27152 226-27350 226-27558 226-27657 226-27756
226-47051 226-47150 226-47358 226-47457 226-47556
B1613-512-B0B
B1613-512-D0B
B1613-512-F0B B1613-512-G0B B1613-512-H0B
Gauges installed at the time of delivery
Model Part No. Description Feature
V059
AT-36
―
MAV-059000AA
226-56854
236-11056
Tension-free feeder (tape feeder)
Tape cutter
Automatic reverse feed kit
Micro-lifter
The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation.
The tape cutter is able to cut the tape just behind the presser foot (20mm away from the needle entry point). The cutter pressure is adjustable according to the material thickness.
The automatic reverse feed function device can be mounted on the machine after the setup. This device can be installed on the back of the face plate. It is very convenient for frequent use.
This device can be installed on the back of the face plate. It is very convenient for frequent use.
OPTIONS
For tape attachment
Bed with flat top surface
Needle slot
φ2.0 (B gauge) φ2.2 (D and F gauges)
With swivel guide With behind-the-
needle-slot grooves
Needle-feed gauges
Standard type
For tape attachment
Presser foot
Standard type
For tape attachment
Feed dog
(small pitch)
B
D
F G H
3.2mm (1/8")
4.8mm (3/16")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
Gauge size
Code
Feed dog
(large pitch)
Rectangular feed
101-08108 101-08207
B1109-528-B00
B1106-528-D00
B1109-528-G00
101-86302 101-86401
101-86500
226-37656 226-37854 226-38050 226-38258 226-38357
226-35107 226-35304 226-35502 226-35700 226-35809
Optional gauges
Needle-feed gauges
Throat plate
Feed dog (small pitch)
For light-weight materials
Presser foot
Feed dog (small pitch)
101-40804 101-40903
226-34000 226-34208 226-34406 226-34505 226-34604
Feed dog (large pitch) Feed dog (large pitch)
B D
F
3.2mm (1/8")
4.8mm (3/16")
6.4mm (1/4")
Gauge size
Code
Throat plate
228-45200 228-45408 228-45606
103-91852 103-92058 103-92256
232-05107 232-05305 232-05503
Bottom-feed gauges
Presser foot Feed dog
Common gauges for
needle-feed and bottom-feed
Slide plate (front)
Standard type
B1110-051-0A0 232-06709
With behind-the­needle-slot grooves
B D
F G H
3.2mm (1/8")
4.8mm (3/16")
6.4mm (1/4")
7.1mm (9/32")
7.9mm (5/16")
Gauge size
Code
Throat plate
For tape attachment
226-28002 226-28200 226-28408 226-28507 226-28606
Needle-feed gauges
With tape inserting recess
Slide plate (front) For tape attachment
226-08558
Common gauges for
needle-feed and
bottom-feed
All-thin type
With behind-the­needle-slot grooves
With behind-the­needle-slot grooves
Without behind-the­needle-slot grooves
Without behind-the­needle-slot grooves
www.egemakine.com.tr
LH-3162-7, 3182-7 (September, 2003) 1/2
Model Part No. Description Feature
AK89
―
227-98458 227-97252 227-98508 EA-9500B0100
227-98052
Auto-lifter
Compensation stitching switch (reverse feed control lever mounting type)
Compensation stitching switch (foot switch type)
Works effectively when you need to perform sewing while changing the stitch length of the compensation stitch (one stitch).
Works effectively when you want to control the compensation stitching (one stitch) by foot.
OPTIONS
LH-3182-7/CP-660B
Model name
Application
Max. sewing speed Max. stitch length Lift of the presser foot
Hook
Needle (at the time of delivery) Thread take-up Needle bar stroke Lubrication Lubricating oil Organized split needle bar Distance from needle to machine arm Bed size Weight of the machine head Power requirement
The automatic organized split needle bar releasing device automatically counts the number of stitches and releases the needle bar from the stop state. Since the operator only needs to press the switch once at the start of corner stitching, operator can concentrate on the handling of the material being sewn. This upgrades efficiency dramatically.
To sew several corners of a material continuously, a series of corner stitching processes can be automatically performed by creating a sewing program which combines different types of corner stitching processes.* As many as eight different corner stitching processes and eight different patterns can be combined in a sewing program. * If your machine is equipped with JUKI’s unique reverse function
(pattern inverting function), as many as 16 different corner stitching processes can be combined.
The machine is able to sew continuous obtuse-angle corners (gentle corners). Since the machine can perform same pattern sewing in repetition, it allows the operator to continuously sew gentle corners of a skirt (sewing in repetition) only by operating the knee switch.
2-needle, Needle-feed, Lockstitch Machine with Automatic Organized Split Needle Bar Incorporating Corner Programming Device and Automatic Thread Trimmer
SPECIFICATIONS
LH-3162-7 LH-3182-7
(with large hooks)
LH-3162A-7
For light-weight materials
LH-3162S-7
For medium-weight
materials
3,000rpm
5mm (normal/reverse feed)
By hand: 5.5mm, By knee: 12mm, By knee lifter with wiper: 9mm
Vertical-axis regular hook (cap type)
DP×5 (#11) #11#14 DP×5 (#14) #11#18 DP×5 (#21) #18#22, For JE: 134 (Nm130)
Slide type
33.4mm
Fully automatic lubrication system by means of plunger pump
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Provided as standard
245mm
517mm×178mm
43Kg
Single-phase 100〜120V, 200240V, 3-phase 200〜240V
LH-3162G-7 LH-3182G-7
For jeans and heavy-weight materials
Vertical-axis double-
capacity hook (cap type)
Compensation stitching switch (reverse feed control lever mounting type)
Compensation stitching switch (foot switch type)
2
www.egemakine.com.tr
LH-3162-7, 3182-7 (September, 2003) 2/2
Corner stitching hand-operated switches ● Control panel
CP-660B ● Servomotor/Controller SC-804
Spec.
Model name
Needle gauge
Code
62
82
Type
Needle-feed with an organized split needle bar
Needle-feed with an organized split needle bar and large hooks
Code
Z
A
B
Options
Not provided With compensation stitching
switch (reverse feed control lever mounting type)
With compensation stitching switch (foot switch type)
Code
WHEN YOU PLACE ORDERS
A
S G G
mm inch
LH-3162-7
LH-3182-7
B
3.2
1/8
○
C
4.0
5/32
○ ○
D
4.8
3/16
○ ○ ○ ○
E
5.6
7/32
○ ○ ○ ○
F
6.4
1/4
◎ ◎ ◎ ◎
G
7.1
9/32
○ ○ ○ ○
H
7.9
5/16
○ ○ ○ ○
K
9.5
3/8
○ ○ ○ ○
L
12.7 1/2
○ ○ ○ ○
M
15.9 5/8
○ ○ ○
N
19.1 3/4
○ ○ ○
Q
25.4 1
○ ○ ○
LH31 7
Code
A
S
G
Application
For light-weight materials
For medium-weight materials
For jeans and heavy­weight materials
Code
Z A
Auto-lifter
Not provided Pedal switch type
(AK89)
Wiper and automatic reverse feed function
Not provided
Provided
Wiper
Automatic reverse feed function
Not provided Provided Not provided Provided
Code
00
0B W0 WB
Gauges marked () are standard type. Please contact us for any gauge which is not included in the above table.
SC804 SH660B
Control panel
CP-660B
Code
H
Code
660
Pully belt
φ75: 39 inch (for LH-3100 series)
PSC box/control panel/motor for SC
Control box
Standard (PK-70/-71 can be used for this feature)
Code
S
Code
07
08
11
12
34
37
38
Japanese, English, Chinese
English, German, French, Spanish, Italy
Japanese, English, Chinese
English, German, French, Spanish, Italy
English, German, French, Spanish, Italy
English, German, French, Spanish, Italy
English, German, French, Spanish, Italy
PSC box
Single-phase 230V
Single-phase 120V
3-phase 220V
3-phase 220V
Single-phase
220V For General Export
For CE
For JUS (LA)
PFL
PFL
PFL
PFL
PFL
If an auto-lifter is installed on the machine, the presser foot will be lifted/lowered by the foot pedal.
** JUS: North America and Central and South America.
**
*
*
*
*
*
www.egemakine.com.tr
MO-6100D Series (September, 2003) 1/3
The needle bar, feed and looper mechanisms require no oiling. This means they do not splash oil, thereby leaving no oil stains on the sewing material, and thus contributing to upgraded quality.
The driving section of the machine, except for the needle bar, feed and looper mechanisms is installed in a forced oiling block. This block is completely sealed to prevent the leakage of oil.
Stain-removing work or re-sewing work resulting from oil stains is eliminated.
The machine does not need periodical oiling or used-oil disposal, which markedly improves maintainability.
Anti-material-slip type MO-6114D-□□□-30P, MO-6116D-□□□-30P
The sewing machine is fully equipped with adjusting devices and provisions to effectively prevent puckering of difficult-to-sew materials or new-generation materials. The operator is able to produce beautifully finished high-quality seams without conducting difficult adjustments.
SPECIFICATIONS
Dry-head, High-speed, Overlock / Safety Stitch Machine

MO-6100D Series

MO-6114D
Model name MO-6104D MO-6114D MO-6116D
Stitch type 1-needle overlock 2-needle overlock Safety stitching Stitch style in the U.S.A. 504 514 516 Max. sewing speed 6,000rpm Stitch length 0.84mm 1.54mm Needle gauge (mm) 2.0, 2.4 2.0, 3.2, 4.8 Overedging width (mm) 3.2, 4.0, 4.8 2.0, 3.2, 4.0, 4.8 3.2, 4.0, 4.8 Bottom differential feed ratio For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6) Needle bar stroke 24.5mm (anti-material-slip type), 25.5mm (upper looper extra high throw type) Inclination angle of the needle 20° Needle mechanism Needle bar method and upper/lower bushing Needle DC×27 (excluding some subclass model) Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) Stitch adjusting method By push-button Differential-feed adjusting method By lever (with micro-adjustment) Weight of the machine head 28kg Lubrication No lubrication Needle cooler Option Needle thread heat remover Option Micro-lifter Provided as standard
SUBCLASS MACHINE LIST
Seams Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge (mm)
Overedging width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed (rpm)
Bottom
differential-
feed ratio
Remarks
MO-6104D-0D4-40H 1 3 3.2 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6104D-0E4-40H 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6104D-0D6-40H
MH
13 3.2 3 4 1:0.7〜1:2 7 DC×27 #11 6,000 MO-6104D-0E6-40H 1 3 4.0 3 4 1:0.71:2 7 DC×27 #11 6,000 MO-6104D-0F4-40H 1 3 4.8 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6104D-0F6-40H 1 3 4.8 3 4 1:0.71:2 7 DC×27 #11 6,000
1-needle overlock
For runstitching in general fabric
Upper looper extra high throw type
3
www.egemakine.com.tr
MO-6100D Series (September, 2003) 2/3
WHEN YOU PLACE ORDERS
MO61 D /
Stitch type U.S.A Code
1-needle overlock 504 04 2-needle overlock 514 14 2-needle safety stitch 516 16
Material Application
Special machine
Code
classification
Medium- to Specific to knits
Runstitching
Upper looper
heavy-weight such as sweaters
extra high thro
w
40H
Tape attaching
Upper looper extra high throw
44H
Light- to medium-weight
For general fabrics Runstitching Anti-material-slip type 30P
Type Code
Dry-head D
Device and attachment Code
Tape attaching presser foot (for sewing sharp curves) / Tape guide G39/Q141
Needle Overedging
gauge (mm) width (mm)
Feed dog Code
3.2 2-row 0D4 3.2 3-row 0D6 4.0 2-row 0E4 4.0 3-row 0E6 4.8 2-row 0F4 4.8 3-row 0F6
2.0 2.0 3-row BB6
2.0 3.2 2-row BD4
2.0 3.2 3-row BD6
2.0 4.0 2-row BE4
2.0 4.0 3-row BE6
2.4 4.8 3-row CF6
3.2 3.2 2-row DD4
3.2 4.0 2-row DE4
3.2 4.0 3-row DE6
3.2 4.8 2-row DF4
3.2 4.8 3-row DF6
4.8 4.8 2-row FF4
4.8 4.8 3-row FF6
Remarks
MO-6114D-BD4-40H
MH
242.0 3.2 2 4 1:0.71:2 6.5 DC×27 #11 6,000 MO-6114D-BD6-40H 2 4 2.0 3.2 3 4 1:0.71:2 6.5 DC×27 #11 6,000 MO-6114D-BE4-40H 2 4 2.0 4.0 2 4 1:0.71:2 6.5 DC×27 #11 6,000 MO-6114D-BE6-40H 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 6,000 MO-6114D-BB6-30P
LM
242.0 2.0 3 4 1:0.71:2 6.5 DC×27 #11 6,000
Anti-material-slip
MO-6114D-BD6-30P 2 4 2.0 3.2 3 4 1:0.71:2 6.5 DC×27 #11 6,000 MO-6114D-BE6-30P 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 6,000
MO-6114D-CF6-40H MH2 42.4 4.8 3 4 1:0.71:2 6.5 DC×27 #11 6,000
2-needle overlock
For runstitching in general fabric
MO-6116D-DE4-40H
MH
253.2 4.0 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-DE6-40H 2 5 3.2 4.0 3 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-DF4-40H 2 5 3.2 4.8 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-DF6-40H 2 5 3.2 4.8 3 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-FF6-40H 2 5 4.8 4.8 3 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-BE4-30P
LM
252.0 4.0 2 4 1:0.71:2 7 DC×27 #11 6,000
Anti-material-slip
MO-6116D-BF4-30P 2 5 2.0 4.8 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-DD4-30P 2 5 3.2 3.2 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-DE4-30P 2 5 3.2 4.0 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-DF4-30P 2 5 3.2 4.8 2 4 1:0.71:2 7 DC×27 #11 6,000 MO-6116D-FF4-30P 2 5 4.8 4.8 2 4 1:0.71:2 7 DC×27 #11 6,000
Safety stitching
For runstitching in general fabric
MO-6114D-BE6-44H/ G39/Q141
MH2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #14 6,000
For tape attaching ★G39: Tape attaching presser foot Q141: Tape guide
Upper looper extra high throw type
Upper looper extra high throw type
Upper looper extra high throw type
Upper looper extra high throw type
www.egemakine.com.tr
MO-6100D Series (September, 2003) 3/3
DEVISES AND ATTACHMENTS
Chain-off thread trimming device
Blower-type chain-off thread suction device
Pneumatic chain-off thread suction device
Auto-lifter
Gathering device
Blind hemming device
Piping folder
Guide, Ruler
Feller, Binder
Miscellaneous
Model Part No. Description
T039
MAT-039001A0 For 110, 115, 220, 240V MAT-039002A0 For 220, 380, 415, 440V MAT-040001A0 For 110, 115, 220, 240V
T040
MAT-040002A0 For 220, 380, 415, 440V MAT-040001AA For 110, 115, 220, 240V MAT-040002AA For 220, 380, 415, 440V
T041 MAT-041000A0A Pneumatic flat cutter T042 MAT-042000A0 Pneumatic side cutter (for overlock machine)
MC-4 Specific to chain-off thread, pedal-operated MC-5 Specific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips
AK32 GAK-320000A0 Pneumatic type (knee-operated) AK49 GAK-490000A0 Pneumatic type (pedal-operated) AK101 GAK-A01000A0 Pneumatic type (for servomotor)
S159 MAS-159000A0
Swing-type gathering device (interlocked with pedal / for safety stitch machine)
S160 MAS-160000A0
Swing-type gathering device (interlocked with pedal / for overlock machine)
S161 MAS-161000A0
Swing-type gathering device (manual-lever operated / for safety stitch machine)
S162 MAS-162000A0
Swing-type gathering device (manual-lever operated / for overlock machine)
PF-0552010-B0 Air regulator (F.R. unit asm.) GMD-01080000
×2Fixing screw for F.R. unit asm.
F1021-003-000 Tube connector (male) GAS-12063000
One-touch connector Selection parts instead of the tube connector
MC-7A
Blower-type chain-off thread suction device + cloth chips
One-touch type tape cutter and chain-off thread trimming device (electromagnetic type)
Automatic tape cutter + chain-off thread trimming device (number-off-stitch control and electro­magnetic type)
[Reference]
Combination table of “chain-off thread suction device” and “auto-lifer” which correspond to “chain-off thread trimming device”.
Chain-off
thread
trimming
device
T039
T040
T041
or
T042
Chain-off
thread
Auto-lifter
suction
device
MC-7A AK101 (JUKI servomotor)
MC-8 AK101 (JUKI ser vomotor) MC-9 (MC-9 is equipped with auto-lifter.)
MC-7A AK32 (any motor will do)
MC-5 AK32 (any motor will do)
MC-24 AK32 (any motor will do)
AK49 (Motors other than JUKI servomotors are applicable.)
MC-7A
AK101 (JUKI servomotor) MC-4 MC-8 AK101 (JUKI ser vomotor) MC-9 ― (MC-9 is equipped with auto-lifter.)
For semi­sunken type
For fully­sunken type
L121 MAL-121000A0 Blind stitch hemming attachment A ruler used for blind hemming in knits
M056 MAM-0560J0A0 Piping folder
This piping folder makes a piping first, then turns up the tape.
M075 MAM-0750J0A0 Piping folder (to be used with knit tape)
This attachment can be used for both “cotton bias tape with gimp” and “knit tape”. The operation mode can be changed over with a fingertip control.
M076 MAM-0760N0A0 Ready-made piping folder
The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm.
M077 MAM-0770M0A0 Piping folder for gathering
The attachment makes gathers on the lower fabric while making decorative piping.
H153 MAH-153000A0 Cloth edge guide ruler (for overlock machine)
A swing type edge guide.
H154 MAH-154000A0 Cloth edge guide ruler (for safety stitch machine) Q141 MAQ-141000B0 Tape guide
K006 MAK-00601000
Upturn feller
This feller is exclusively used with the 3C0 throat plate. It is attached on the throat plate.
N067 MAN-0670D0A0
Reinforcement tape attachment binder (finished width: 4mm)
This binder binds the edge of a pocket bag while cutting round its periphery.
131-62557 Needle cooler unit asm.
 ―SS-7110840SP Screw
For overlock machine
131-63159 Needle cooler unit asm.
Needle cooler
SS-7110840SP Screw
For safety stitch machine
By silicon oil lubricationg unit for the needle thread.
131-63902 Presser 131-63456 Silicon tank asm.
Needle thread heat remover
 ― 131-63803 Felt
By silicon oil lubricating unit for the needle thread.
TA-0950806R0 Rubber plug SM-4040855SP Screw
The aforementioned devices are not equipped with air regulator.
Please purchase the following components when you need to regulate air pressure.
Model Part No. Description Feature
The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers.
The attachment is used to perform two different processes, joining fabric process and gathering process, at a time. The attachment can be opened/closed by using the lever (manually operated). The differential-feed ratio is controlled with the knee lever.
This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less.
3
www.egemakine.com.tr
MO-6700S Series (September, 2003) 1/4
Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm.
The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used.
SPECIFICATIONS
SUBCLASS MACHINE LIST
High-speed, overlock/ safety stitch machine

MO-6700S Series

MO-6714S
Model name MO-6704S MO-6714S MO-6716S
Stitch type 1-needle overlock 2-needle overlock Safety stitching Stitch style in the U.S.A. 504 514 516 Max. sewing speed 7,000rpm Stitch length 0.84mm 1.54mm Needle gauge (mm) 2.0, 2.4, 3.2 2.0, 3.2, 4.0, 4.8, 4.8+2.0 Overedging width (mm) 1.6, 3.2, 4.0, 4.8 3.2, 4.0, 4.8 3.2, 4.0, 4.8, 6.4 Differential feed ratio For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6) Needle bar stroke 24.5mm Inclination angle of the needle 20° Needle mechanism Needle bar method and upper/lower bushing Needle DC×27 (excluding some subclass model) Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) Stitch adjusting method By push-button Differential-feed adjusting method By lever (with micro-adjustment) Weight of the machine head 28kg Lubrication Automatic Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Option Needle thread heat remover Option Micro-lifter Provided as standard
Seams Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge (mm)
Overedging width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed (rpm)
Bottom
differential-
feed ratio
Remarks
MO-6704S-0D4-300 1 3 3.2 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0E4-300 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0F4-300 1 3 4.8 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0D6-300 1 3 3.2 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0F6-300 LM1 3 4.8 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0D4-3F0 1 3 3.2 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0E4-3F0 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 7,000
For soft-chains
MO-6704S-0D6-3F0 1 3 3.2 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0D4-3F6 1 3 3.2 2 4 1:0.71:2 7 DC×27 #11 7,000
1-needle overlock
For runstitching in general fabric
3
www.egemakine.com.tr
MO-6700S Series (September, 2003) 2/4
Remarks
MO-6714S-BD4-307 2 4 2.0 3.2 2 4 1:0.71:2 6.5 DC×27 #11 7,000 MO-6714S-BE4-307 2 4 2.0 4.0 2 4 1:0.71:2 6.5 DC×27 #11 7,000 MO-6714S-BD6-307 LM2 42.0 3.2 3 4 1:0.71:2 6.5 DC×27 #11 7,000 MO-6714S-BE6-307 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 7,000 MO-6714S-BE6-20H 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 7,000 MO-6714S-BE4-40H 2 4 2.0 4.0 2 4 1:0.71:2 6.5 DC×27 #11 7,000 MO-6714S-BE6-40H 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 7,000 MO-6712S-CE4-40H
MH
242.4 4.0 2 4 1:0.71:2 6.5 DC×27 #11 7,000
MO-6712S-DF6-507 2 4 3.2 4.8 3 4 1:0.71:2 6.5 DC×27 #14 7,000
For imitation safety-stitching
MO-6712S-DF6-50F 2 4 3.2 4.8 3 4 1:0.71:2 6.5 DC×27 #14 7,000
MO-6704S-0A4-150
ELL
13 1.6 2 4 1:0.7〜1:2 5 DC×1 #8 7,000
MO-6704S-0A5-150 1 3 1.6 1 4 1:0.71:2 5 DC×1 #8 7,000
MO-6705S-0D4-210/
LM1 3 3.2 2 4 1:0.71:2 5.5 DC×27 #9
7,000
L121 MO-6705S-0E4-41H/
MH1 3 4.0 2 4 1:0.71:2 5.5 DC×27 #9
7,000
Upper looper extra
L121 high throw type
MO-6716S-DD6-300 2 5 3.2 3.2 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-DD6-3F0 2 5 3.2 3.2 3 4 1:0.71:2 7 DC×27 #11 7,000 For soft-chains MO-6716S-DE4-300 LM2 53.2 4.0 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-DE6-300 2 5 3.2 4.0 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-FF6-300 2 5 4.8 4.8 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-BE4-40H 2 5 2.0 4.0 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-DE4-40H 2 5 3.2 4.0 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-DE6-40H 2 5 3.2 4.0 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-FF6-40H
MH
254.8 4.8 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6716S-DD6-500 2 5 3.2 3.2 3 4 1:0.71:2 7 DC×27 #16 7,000 MO-6716S-FF6-500 2 5 4.8 4.8 3 4 1:0.71:2 7 DC×27 #16 7,000 MO-6716S-FF6-50H 2 5 4.8 4.8 3 4 1:0.71:2 6.5 DC×27 #16 7,000 MO-6716S-FH6-50H 2 5 4.8 6.4 3 4 1:0.71:2 6.5 DC×27 #16 7,000 MO-6716S-FF6-60H
H
254.8 4.8 3 4.5 1:0.91:1.7 5 DC×27 #21 7,000 MO-6716S-FH6-60H 2 5 4.8 6.4 3 4.5 1:0.91:1.7 5 DC×27 #21 7,000
Safety stitching
For runstitching in general fabric
2-needle overlock
For runstitching in general fabric
For rolled hemming (folded downward)
Upper looper extra high throw type
For jeans Upper looper extra high throw type
Upper looper extra high throw type
Upper looper extra high throw type
Upper looper extra high throw type
For blind hemming ★L121: Blind stitch hemming attachment
MO-6714S-BE6-44H/
242.0 4.0 3 3.2 1:0.91:2.6 7 DC×27 #14 7,000
G39/Q141 MO-6714S-BE7-44H/
MH
242.0 4.0 4 3.2 1:0.91:2.6 7 DC×27 #14 7,000
G02/Q141
For tape attaching ★G02, G39: Tape attaching presser foot Q141: Tape guide
MO-6714S-BE6-327/
LM2 42.0 4.0 3 3.2 1:0.91:2.6 6 DC×27 #11 7,000
S162
For gathering ★S162: Swing-type gathering device (manual-lever operated)
For soft-chains
MO-6704S-0E4-4FH 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 7,000 Upper looper ex tra
high throw type MO-6704S-0E4-40H 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0F4-40H
MH
13 4.8 3 4 1:0.7〜1:2 7 DC×27 #11 7,000 MO-6704S-0E6-40H 1 3 4.0 3 4 1:0.71:2 7 DC×27 #11 7,000 MO-6704S-0F6-500 1 3 4.8 3 4 1:0.71:2 7 DC×27 #14 7,000
MO-6704S-0F6-50H 1 3 4.8 3 4 1:0.71:2 7 DC×27 #14 7,000
Upper looper extra high throw type
Upper looper extra high throw type
www.egemakine.com.tr
MO-6700S Series (September, 2003) 3/4
WHEN YOU PLACE ORDERS
MO67 S /
Remarks
MO-6745S-ED4-360/
2-needle type for
N077
LM2 44.0 3.2 2 4 1:0.71:2 5 DC×27 #14 7,000 double-chainstitch
on pocket bags
For rolling-in tape ★N077: Clean finish top and bottom
Upper looper extra high throw type
Upper looper extra high throw type
MO-6716S-FF6-42H/
254.8 4.8 3 3.2 1:0.91:2.6 6 DC×27 #14 7,000
S159 MO-6716S-DE4-42H/
MH
253.2 4.0 2 3.2 1:0.91:2.6 6 DC×27 #11 7,000
S161
For gathering ★S159: Swing-type gathering device (interlocked with pedal) S161: Swing-type gathering device (manual-lever operated)
MO-6743S-1D6-40H
MH
36
4.8
3.2 3 4 1:0.71:2 6.5 DC×27 #11 7,000
+2.0
MO-6743S-2D6-40H 3 6
3.2
3.2 3 4 1:0.71:2 6.5 DC×27 #11 7,000
+2.0
3-needle safety stitching
Stitch type U.S.A Code
1-needle overlock 504 04 1-needle overlock
for blind hemming
505 05
2-needle imitation safety stitch
512 12
2-needle overlock 514 14 2-needle safety stitch 516 16 3-needle safety stitch 43 2-needle double chain stitch 45
Type Code
Standard S
Needle Overedging
gauge (mm) width (mm)
Feed dog Code
― 1.6 2-row 0A4 ― 1.6 1-row 0A5 ― 3.2 2-row 0D4 ― 3.2 3-row 0D6 ― 4.0 2-row 0E4 ― 4.0 3-row 0E6 ― 4.8 2-row 0F4 ― 4.8 3-row 0F6
2.0 3.2 2-row BD4
2.0 3.2 3-row BD6
2.0 4.0 2-row BE4
2.0 4.0 3-row BE6
2.0 4.0 4-row BE7
2.4 4.0 2-row CE4
3.2 3.2 3-row DD6
3.2 4.0 2-row DE4
3.2 4.0 3-row DE6
3.2 4.8 3-row DF6
4.0 3.2 2-row ED4
4.8 4.8 3-row FF6
4.8 6.4 3-row FH6
4.8+2.0 3.2 3-row 1D6
3.8+2.0 3.2 3-row 2D6
Device and attachment Code
Tape attaching presser foot / Tape guide G02/Q141 Tape attaching presser foot (for sewing sharp curves)/ Tape guide G39/Q141 Blind stitch hemming attachment L121 Swing-type gathering device
(interlocked with pedal / for safety stitch machine)
S159
Swing-type gathering device (manual-lever operated / for safety stitch machine)
S161
Swing-type gathering device (manual-lever operated / for overlock machine)
S162
Clean finish top and bottom N077
Material Application
Special machine
Code
classification
Rolled hemming Standard 150
Runstitching Upper looper extra high throw 20H Blind hemming Standard 210 Runstitching Standard 300 Runstitching Upper looper high throw 307 Gathering Upper looper high throw 327 Rolling-in tape Standard 360 Soft-chain Standard 3F0
Soft-chain
Throat plate and feed dog both provided with a lip
3F6
Runstitching Upper looper extra high throw 40H Blind hemming Upper looper extra high throw 41H Gathering Upper looper extra high throw 42H Tape attaching Upper looper extra high throw 44H Soft-chain Upper looper extra high throw 4FH Runstitching Standard 500 Runstitching Upper looper high throw 507 Runstitching Swim suits 50F Runstitching Upper looper extra high throw 50H
Runstitching Upper looper extra high throw 60H
Light-weight materials such as men's shirts
Specific to knits
For general fabrics
Specific to knits such as sweaters
Medium- to heavy-weight materials such as denim
For heavy-weight materials
Extra light- to light-weight
Light- to medium-weight
Light- to medium-weight
Medium- to heavy-weight
3
www.egemakine.com.tr
MO-6700S Series (September, 2003) 4/4
Model Part No. Description
T039
MAT-039001A0 For 110, 115, 220, 240V MAT-039002A0 For 220, 380, 415, 440V MAT-040001A0 For 110, 115, 220, 240V
T040
MAT-040002A0 For 220, 380, 415, 440V MAT-040001AA For 110, 115, 220, 240V MAT-040002AA For 220, 380, 415, 440V
T041 MAT-041000A0A Pneumatic flat cutter T042 MAT-042000A0 Pneumatic side cutter (for overlock machine)
MC-4 Specific to chain-off thread, pedal-operated MC-5 Specific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips
AK32 GAK-320000A0 Pneumatic type (knee-operated) AK49 GAK-490000A0 Pneumatic type (pedal-operated) AK101 GAK-A01000A0 Pneumatic type (for servomotor)
S159 MAS-159000A0
Swing-type gathering device (interlocked with pedal / for safety stitch machine)
S160 MAS-160000A0
Swing-type gathering device (interlocked with pedal / for overlock machine)
S161 MAS-161000A0
Swing-type gathering device (manual-lever operated / for safety stitch machine)
S162 MAS-162000A0
Swing-type gathering device (manual-lever operated / for overlock machine)
PF-0552010-B0 Air regulator (F.R. unit asm.) GMD-01080000×2Fixing screw for F.R. unit asm. F1021-003-000 Tube connector (male)
GAS-12063000
One-touch connector Selection parts instead of the tube connector
MC-7A
Blower-type chain-off thread suction device + cloth chips
One-touch type tape cutter and chain-off thread trimming device (electromagnetic type)
Automatic tape cutter + chain-off thread trimming device (number-off-stitch control and electro­magnetic type)
[Reference]
Combination table of “chain-off thread suction device” and “auto-lifer” which correspond to “chain-off thread trimming device”.
Chain-off
thread
trimming
device
T039
T040
T041
or
T042
Chain-off
thread
Auto-lifter
suction
device
MC-7A AK101 (JUKI servomotor)
MC-8 AK101 (JUKI servomotor) MC-9 ― (MC-9 is equipped with auto-lifter.)
MC-7A AK32 (any motor will do)
MC-5 AK32 (any motor will do)
MC-24 AK32 (any motor will do)
AK49 (Motors other than JUKI servomotors are applicable.)
MC-7A
AK101 (JUKI servomotor) MC-4 MC-8 AK101 (JUKI servomotor) MC-9 ― (MC-9 is equipped with auto-lifter.)
For semi­sunken type
For fully­sunken type
L121 MAL-121000A0 Blind stitch hemming attachment A ruler used for blind hemming in knits
M056 MAM-0560J0A0 Piping folder
This piping folder makes a piping first, then turns up the tape.
M075 MAM-0750J0A0 Piping folder (to be used with knit tape)
This attachment can be used for both “cotton bias tape with gimp” and “knit tape”. The operation mode can be changed over with a fingertip control.
M076 MAM-0760N0A0 Ready-made piping folder
The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm.
M077 MAM-0770M0A0 Piping folder for gathering
The attachment makes gathers on the lower fabric while making decorative piping.
H153 MAH-153000A0 Cloth edge guide ruler (for overlock machine)
A swing type edge guide.
H154 MAH-154000A0 Cloth edge guide ruler (for safety stitch machine) Q141 MAQ-141000B0 Tape guide
K006 MAK-00601000
Upturn feller
This feller is exclusively used with the 3C0 throat plate. It is attached on the throat plate.
N067 MAN-0670D0A0
Reinforcement tape attachment binder (finished width: 4mm)
This binder binds the edge of a pocket bag while cutting round its periphery.
131-62557 Needle cooler unit asm. SS-4091015SP Screw
For overlock machine
WP-0371026SD Washer
Needle cooler
 ― SS-7110840SP Screw
By silicon oil lubricationg unit for the needle thread.
131-63159 Needle cooler unit asm. SS-4091015SP Screw For safety stitsch machine WP-0371026SD Washer 131-63902 Presser 131-63456 Silicon tank asm.
Needle thread heat remover
 ― 131-63803 Felt
By silicon oil lubricating unit for the needle thread.
TA-0950806R0 Rubber plug SM-4040855SP Screw
The aforementioned devices are not equipped with air regulator.
Please purchase the following components when you need to regulate air pressure.
Model Part No. Description Feature
The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers.
The attachment is used to perform two different processes, joining fabric process and gathering process, at a time. The attachment can be opened/closed by using the lever (manually operated). The differential-feed ratio is controlled with the knee lever.
This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less.
DEVISES AND ATTACHMENTS
Chain-off thread trimming device
Blower-type chain-off thread suction device
Pneumatic chain-off thread suction device
Auto-lifter
Gathering device
Blind hemming device
Piping folder
Guide, Ruler
Feller, Binder
Miscellaneous
www.egemakine.com.tr
MO-6900S Series (September, 2003) 1/4
Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 8,000 to 8,500rpm. To offer improved sewing capabilities as well as to prevent stitching misshapes, the machine is equipped as standard with the needle thread heat remover and needle cooler.
SPECIFICATIONS
Super-high-speed, Overlock/Safety Stitch Machine

MO-6900S Series

MO-6914S
Model name MO-6904S MO-6914S MO-6916S
Stitch type 1-needle overlock 2-needle overlock Safety stitching Stitch style in the U.S.A. 504 514 516 Max. sewing speed 8,500rpm 8,000rpm 8,000rpm Stitch length 0.84mm 1.54mm Needle gauge (mm) 2.0, 2.4, 3.2 2.0, 3.2, 4.0, 4.8, 4.8+2.0 Overedging width (mm) 1.6, 3.2, 4.0, 4.8 3.2, 4.0, 4.8 3.2, 4.0, 4.8, 6.4 Differential feed ratio For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6) Needle bar stroke 24.5mm Inclination angle of the needle 20° Needle bar bushing Upper/lower bushing method Needle DC×27(excluding some subclass model) Max. lift of the presser foot 7mm(excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) Stitch adjusting method By push-button Differential-feed adjusting method By lever (with micro-adjustment) Weight of the machine head 28kg Lubrication Automatic Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Provided as standard (excluding MO-6945S) Needle thread heat remover Provided as standard (excluding MO-6945S) Micro-lifter Provided as standard
SUBCLASS MACHINE LIST
Seams Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge (mm)
Overedging width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed (rpm)
Bottom
differential-
feed ratio
Remarks
MO-6904S-0D4-300 1 3 3.2 2 4 1:0.71:2 7 DC×27 #11 8,500 MO-6904S-0E4-300 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 8,500 MO-6904S-0F4-300 1 3 4.8 2 4 1:0.71:2 7 DC×27 #11 8,000 MO-6904S-0D6-300 1 3 3.2 3 4 1:0.71:2 7 DC×27 #11 8,500 MO-6904S-0E6-300 1 3 4.0 3 4 1:0.71:2 7 DC×27 #11 8,500 MO-6904S-0F6-300
LM
13 4.8 3 4 1:0.7〜1:2 7 DC×27 #11 8,000 MO-6904S-0D4-3F0 1 3 3.2 2 4 1:0.71:2 7 DC×27 #11 8,500 MO-6904S-0E4-3F0 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 8,500
For soft-chains
MO-6904S-0D6-3F0 1 3 3.2 3 4 1:0.71:2 7 DC×27 #11 8,500 MO-6904S-0D4-3F6 1 3 3.2 2 4 1:0.71:2 7 DC×27 #11 8,500
1-needle overlock
For runstitching in general fabric
3
www.egemakine.com.tr
MO-6900S Series (September, 2003) 2/4
Remarks
MO-6916S-DD6-300 2 5 3.2 3.2 3 4 1:0.71:2 7 DC×27 #11 8,000 MO-6916S-DD6-3F0 2 5 3.2 3.2 3 4 1:0.71:2 7 DC×27 #11 8,000 For soft-chains MO-6916S-DE4-300 LM2 53.2 4.0 2 4 1:0.71:2 7 DC×27 #11 8,000 MO-6916S-DE6-300 2 5 3.2 4.0 3 4 1:0.71:2 7 DC×27 #11 8,000 MO-6916S-FF6-300 2 5 4.8 4.8 3 4 1:0.71:2 7 DC×27 #11 8,000 MO-6916S-BE4-40H 2 5 2.0 4.0 2 4 1:0.71:2 7 DC×27 #11 7,500 MO-6916S-DE4-40H 2 5 3.2 4.0 2 4 1:0.71:2 7 DC×27 #11 7,500 MO-6916S-DE6-40H 2 5 3.2 4.0 3 4 1:0.71:2 7 DC×27 #11 7,500 MO-6916S-FF6-40H 2 5 4.8 4.8 3 4 1:0.71:2 7 DC×27 #11 7,500 MO-6916S-DD6-500 MH2 53.2 3.2 3 4 1:0.71:2 7 DC×27 #16 8,000 MO-6916S-FF6-500 2 5 4.8 4.8 3 4 1:0.71:2 7 DC×27 #16 8,000 MO-6916S-DF6-50H 2 5 3.2 4.8 3 4 1:0.71:2 6.5 DC×27 #16 7,500 MO-6916S-FF6-50H 2 5 4.8 4.8 3 4 1:0.71:2 6.5 DC×27 #16 7,500 MO-6916S-FH6-50H 2 5 4.8 6.4 3 4 1:0.71:2 6.5 DC×27 #16 7,500 MO-6916S-FF6-60H
H
254.8 4.8 3 4.5 1:0.91:1.7 5 DC×27 #21 7,000
MO-6916S-FH6-60H 2 5 4.8 6.4 3 4.5 1:0.91:1.7 5 DC×27 #21 7,000
Safety stitching
For runstitching in general fabric
Upper looper extra high throw type
For jeans Upper looper extra high throw type
Upper looper extra high throw type
Upper looper extra high throw type
Upper looper extra high throw type
MO-6914S-BE6-44H/
242.0 4.0 3 3.2 1:0.91:2.6 7 DC×27 #14 7,000
G39/Q141 MO-6914S-BE7-44H/
MH
242.0 4.0 4 3.2 1:0.91:2.6 7 DC×27 #14 7,000
G02/Q141
For tape attaching ★G02, G39: Tape attaching presser foot Q141: Tape guide
MO-6914S-BD4-307 2 4 2.0 3.2 2 4 1:0.71:2 6.5 DC×27 #11 8,000 MO-6914S-BE4-307 2 4 2.0 4.0 2 4 1:0.71:2 6.5 DC×27 #11 8,000 MO-6914S-BD6-307 LM2 42.0 3.2 3 4 1:0.71:2 6.5 DC×27 #11 8,000 MO-6914S-BE6-307 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 8,000 MO-6914S-BE6-20H 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 7,500 MO-6914S-BE4-40H 2 4 2.0 4.0 2 4 1:0.71:2 6.5 DC×27 #11 7,500 MO-6914S-BE6-40H 2 4 2.0 4.0 3 4 1:0.71:2 6.5 DC×27 #11 7,500 MO-6912S-CE4-40H
MH
242.4 4.0 2 4 1:0.71:2 6.5 DC×27 #11 7,500
MO-6912S-DF6-507 2 4 3.2 4.8 3 4 1:0.71:2 6.5 DC×27 #14 7,500
For imitation safety-stitching
MO-6912S-DF6-50F 2 4 3.2 4.8 3 4 1:0.71:2 6.5 DC×27 #14 7,500
MO-6904S-0A4-150
ELL
13 1.6 2 4 1:0.7〜1:2 5 DC×1 #8 8,500
MO-6904S-0A5-150 1 3 1.6 1 4 1:0.71:2 5 DC×1 #8 8,500
MO-6905S-0D4-210/ L121
13 3.2 2 4 1:0.7〜1:2 5.5 DC×27 #9 7,500
MO-6905S-0E4-41H/
MH
L121
13 4.0 2 4 1:0.7〜1:2 5.5 DC×27 #9 7,500
2-needle overlock
For runstitching in general fabric
For rolled hemming (folded downward)
Upper looper extra high throw type
For blind hemming ★L121: Blind stitch hemming attachment
MO-6914S-BE6-327/
LM2 42.0 4.0 3 3.2 1:0.91:2.6 6 DC×27 #11 7,000
S162
For gathering ★S162: Swing-type gathering device (manual-lever operated)
For soft-chains
MO-6904S-0E4-4FH 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 7,500 Upper looper ex tra
high throw type MO-6904S-0E4-40H 1 3 4.0 2 4 1:0.71:2 7 DC×27 #11 7,500 MO-6904S-0E6-40H
MH
13 4.0 3 4 1:0.7〜1:2 7 DC×27 #11 7,500
MO-6904S-0F6-500 1 3 4.8 3 4 1:0.71:2 7 DC×27 #14 8,000
MO-6904S-0F6-50H 1 3 4.8 3 4 1:0.71:2 7 DC×27 #14 7,500
Upper looper extra
high throw type
Upper looper extra high throw type
www.egemakine.com.tr
MO-6900S Series (September, 2003) 3/4
WHEN YOU PLACE ORDERS
MO69 S /
Remarks
MO-6945S-ED4-360/
2-needle type for
N077
LM2 44.0 3.2 2 4 1:0.71:2 5 DC×27 #14 7,000 double-chainstitch
on pocket bags
For rolling-in tape ★N077: Clean finish top and bottom
Upper looper extra high throw type
Upper looper extra high throw type
MO-6916S-FF6-42H/
254.8 4.8 3 3.2 1:0.91:2.6 6 DC×27 #14 7,000
S159 MO-6916S-DE4-42H/
MH
253.2 4.0 2 3.2 1:0.91:2.6 6 DC×27 #11 7,000
S161
For gathering ★S159: Swing-type gathering device (interlocked with pedal) S161: Swing-type gathering device (manual-lever operated)
MO-6943S-1D6-40H 3 6
4.8
3.2 3 4 1:0.71:2 6.5 DC×27 #11 7,500
+2.0
MO-6943S-1D6-50H
MH
36
4.8
3.2 3 4 1:0.71:2 6.5 DC×27 #11 7,500
+2.0
3-needle safety stitching
Stitch type U.S.A Code
1-needle overlock 504 04 1-needle overlock
for blind hemming
505 05
2-needle imitation safety stitch
512 12
2-needle overlock 514 14 2-needle safety stitch 516 16 3-needle safety stitch 43 2-needle double chain stitch 45
Type Code
Standard S
Needle Overedging
gauge (mm) width (mm)
Feed dog Code
― 1.6 2-row 0A4 ― 1.6 1-row 0A5 ― 3.2 2-row 0D4 ― 3.2 3-row 0D6 ― 4.0 2-row 0E4 ― 4.0 3-row 0E6 ― 4.8 2-row 0F4 ― 4.8 3-row 0F6
2.0 3.2 2-row BD4
2.0 3.2 3-row BD6
2.0 4.0 2-row BE4
2.0 4.0 3-row BE6
2.0 4.0 4-row BE7
2.4 4.0 2-row CE4
3.2 3.2 3-row DD6
3.2 4.0 2-row DE4
3.2 4.0 3-row DE6
3.2 4.8 3-row DF6
4.0 3.2 2-row ED4
4.8 4.8 3-row FF6
4.8 6.4 3-row FH6
4.8+2.0 3.2 3-row 1D6
Device and attachment Code
Tape attaching presser foot / Tape guide G02/Q141 Tape attaching presser foot (for sewing sharp curves)/ Tape guide G39/Q141 Blind stitch hemming attachment L121 Swing-type gathering device
(interlocked with pedal / for safety stitch machine)
S159
Swing-type gathering device (manual-lever operated / for safety stitch machine)
S161
Swing-type gathering device (manual-lever operated / for overlock machine)
S162
Clean finish top and bottom N077
Material Application
Special machine
Code
classification
Rolled hemming Standard 150
Runstitching Upper looper extra high throw 20H Runstitching Standard 300
Runstitching Upper looper high throw 307 Gathering Upper looper high throw 327 Rolling-in tape Standard 360 Soft-chain Standard 3F0
Soft-chain
Throat plate and feed dog both provided with a lip
3F6
Runstitching Upper looper extra high throw 40H Blind hemming Upper looper extra high throw 41H Gathering Upper looper extra high throw 42H Tape attaching Upper looper extra high throw 44H Soft-chain Upper looper extra high throw 4FH Runstitching Standard 500 Runstitching Upper looper high throw 507 Runstitching Swim suits 50F Runstitching Upper looper extra high throw 50H
Runstitching Upper looper extra high throw 60H
Light-weight materials such as men's shirts
Specific to knits
For general fabrics
Specific to knits such as sweaters
For heavy-weight materials
Medium- to heavy-weight materials such as denim
Extra light- to light-weight
Light- to medium-weight
Light- to medium-weight
Medium- to heavy-weight
AC SERVOMOTOR/Machine head
MO69 S / /SY35
Built-in synchronizer
Set speed
Code
MO-6904S 8,000rpm
SY35
MO-6914S, 6916S 7,500rpm
Select a sewing speed that is lower than
the machine head's maximum sewing speed by 500rpm.
3
www.egemakine.com.tr
MO-6900S Series (September, 2003) 4/4
DEVISES AND ATTACHMENTS
Chain-off thread trimming device
Blower-type chain-off thread suction device
Pneumatic chain-off thread suction device
Auto-lifter
Gathering device
Blind hemming device
Piping folder
Guide, Ruler
Feller, Binder
Model Part No. Description
T039
MAT-039001A0 For 110, 115, 220, 240V MAT-039002A0 For 220, 380, 415, 440V
MAT-040001A0 For 110, 115, 220, 240V
T040
MAT-040002A0 For 220, 380, 415, 440V MAT-040001AA For 110, 115, 220, 240V MAT-040002AA For 220, 380, 415, 440V
T041 MAT-041000A0A Pneumatic flat cutter T042 MAT-042000A0 Pneumatic side cutter (for overlock machine)
MC-4 Specific to chain-off thread, pedal-operated MC-5 Specific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips
AK32 GAK-320000A0 Pneumatic type (knee-operated) AK49 GAK-490000A0 Pneumatic type (pedal-operated) AK101 GAK-A01000A0 Pneumatic type (for servomotor)
S159 MAS-159000A0
Swing-type gathering device (interlocked with pedal / for safety stitch machine)
S160 MAS-160000A0
Swing-type gathering device (interlocked with pedal / for overlock machine)
S161 MAS-161000A0
Swing-type gathering device (manual-lever operated / for safety stitch machine)
S162 MAS-162000A0
Swing-type gathering device (manual-lever operated / for overlock machine)
PF-0552010-B0 Air regulator (F.R. unit asm.) GMD-01080000×2Fixing screw for F.R. unit asm. F1021-003-000 Tube connector (male)
GAS-12063000
One-touch connector Selection parts instead of the tube connector
MC-7A
Blower-type chain-off thread suction device + cloth chips
One-touch type tape cutter and chain-off thread trimming device (electromagnetic type)
Automatic tape cutter + chain-off thread trimming device (number-off-stitch control and electro­magnetic type)
[Reference]
Combination table of “chain-off thread suction device” and “auto-lifer” which correspond to “chain-off thread trimming device”.
Chain-off
thread
trimming
device
T039
T040
T041
or
T042
Chain-off
thread
suction
device
Auto-lifter
MC-7A AK101 (JUKI servomotor)
MC-8 AK101 (JUKI servomotor) MC-9 (MC-9 is equipped with auto-lifter.)
MC-7A AK32 (any motor will do)
MC-5 AK32 (any motor will do)
MC-24 AK32 (any motor will do)
AK49
(Motors other than JUKI servomotors
are applicable.)
MC-7A
AK101 (JUKI servomotor) MC-4 MC-8 AK101 (JUKI servomotor) MC-9 (MC-9 is equipped with auto-lifter.)
For semi­sunken type
For fully­sunken type
L121 MAL-121000A0 Blind stitch hemming attachment A ruler used for blind hemming in knits
M056 MAM-0560J0A0 Piping folder This piping folder makes a piping first, then turns up the tape. M075 MAM-0750J0A0 Piping folder (to be used with knit tape)
This attachment can be used for both “cotton bias tape with gimp” and “knit tape”. The operation mode can be changed over with a fingertip control.
M076 MAM-0760N0A0 Ready-made piping folder
The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm.
M077 MAM-0770M0A0 Piping folder for gathering
The attachment makes gathers on the lower fabric while making decorative piping.
H153 MAH-153000A0 Cloth edge guide ruler (for overlock machine)
A swing type edge guide.
H154 MAH-154000A0 Cloth edge guide ruler (for safety stitch machine) Q141 MAQ-141000B0 Tape guide
K006 MAK-00601000
Upturn feller
This feller is exclusively used with the 3C0 throat plate. It is attached on the throat plate.
N067 MAN-0670D0A0
Reinforcement tape attachment binder (finished width: 4mm)
This binder binds the edge of a pocket bag while cutting round its periphery.
The aforementioned devices are not equipped with air regulator.
Please purchase the following components when you need to regulate air pressure.
Model Part No. Description Feature
The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers.
The attachment is used to perform two different processes, joining fabric process and gathering process, at a time. The attachment can be opened/closed by using the lever (manually operated). The differential-feed ratio is controlled with the knee lever.
This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less.
www.egemakine.com.tr
MO-6900R Series (September, 2003) 1/3
The MO-6900R Series comes with a newly-developed feed mechanism that moves the top and bottom feeds separately. With the combination of the feed's increased differential feed ratio and improved feeding capacity, the machine is able not only to prevent uneven material feed, but also to easily finish difficult processes, such as sewing different types of materials together, ruffling and piping.
The locus of the top feed dog increases the surfaces of the top feed dog that horizontally synchronize with the bottom feed dog, to reliably feed the materials without damaging them. The feed mechanism smoothly feeds light-weight materials softly or feeds heavy-weight materials with an increased cloth-biting force.
The fulcrum of the top feed locus can be set at the best-suited position according to the material or process.
SPECIFICATIONS
High-speed, Variable Top-feed, Overlock / Safety Stitch Machine

MO-6900R Series

MO-6914R
Model name MO-6904R MO-6914R MO-6916R
Stitch type 1-needle overlock 2-needle overlock Safety stitching Stitch style in the U.S.A. 504 514 516
Max. sewing speed
7,000rpm (longitudinal stroke of top feed dog is 6mm or less)
6,000rpm (longitudinal stroke of top feed dog is 6〜8.5mm)
Stitch length 0.84mm 1.54mm Needle gauge (mm) 2.0 3.2, 4.8, 4.8+2.0 Overedging width (mm) 3.2, 4.0, 4.8, 6.4 3.2, 4.0 3.2, 4.0, 4.8, 6.4 Bottom differential feed ratio For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6) Needle bar stroke 24.5mm Inclination angle of the needle 20° Needle mechanism Needle bar method and upper/lower bushing Needle DC×27 (excluding some subclass model) Vertical stroke of top feed dog 3.58.5mm (it differs with the machine’s specifications.) Longitudinal stroke of top feed dog 17.5mm (it differs with the machine’s specifications.) Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) Stitch adjusting method By push-button Bottom differential feed adjusting method
By lever (with micro-adjustment)
Top differential feed adjusting method By lever (with micro-adjustment) Weight of the machine head 29kg Lubrication Automatic Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Provided as standard Needle thread heat remover Provided as standard Micro-lifter Provided as standard
SUBCLASS MACHINE LIST
MO-6904R-0D4-3F6
LM
13 3.2 2 4 1:0.71:2 17.5 7 DC×27 #11 7,000 For soft-chains MO-6904R-0E4-300 1 3 4.0 2 4 1:0.71:2 17.5 7 DC×27 #11 7,000 MO-6904R-0F6-500
MH
13 4.8 3 4 1:0.71:2 17.5 7 DC×27 #14 7,000 MO-6904R-0H4-50M 1 3 6.4 2 4 1:0.71: 2 17.5 4.5 DC×27 #16 7,000
For zipper attaching
1-needle overlock
For runstitching in general fabric
Seams Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge
(mm)
Overedging width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed (rpm)
Bottom
differential-
feed ratio
Remarks
Longitudinal
stroke
of top-feed
dog (mm)
3
www.egemakine.com.tr
MO-6900R Series (September, 2003) 2/3
WHEN YOU PLACE ORDERS
MO69 R
MO-6916R-DD6-300
LM
253.2 3.2 3 4 1:0.71:2 17.5 5.5 DC×27 #11 7,000 MO-6916R-DE4-300 2 5 3.2 4.0 2 4 1:0.71:2 17.5 5.5 DC×27 #11 7,000 MO-6916R-DE6-300 2 5 3.2 4.0 3 4 1:0.71:2 17.5 5.5 DC×27 #11 7,000 MO-6916R-FF6-300 2 5 4.8 4.8 3 4 1:0.71:2 17.5 5.5 DC×27 #11 7,000
MO-6916R-FF6-50H
MH
254.8 4.8 3 4 1:0.71:2 175DC×27 #16 7,000
Upper looper extra high throw type
MO-6916R-FH6-60H 2 5 4.8 6.4 3 4.5 1:0.91:1.7 175DC×27 #21 7,000
For jeans Upper looper extra
high throw type
Safety stitching
For runstitching in general fabric
MO-6943R-1D6-307 LM3 6
4.8
3.2 3 4 1:0.71:2 17.5 6.5 DC×27 #11 7,000
+2.0
3-needle safety stitching
Multi-purpose runstitching
Only the pneumatic auto-lifter is prepared for the
MO-6900R series.
Select a sewing speed that
is lower than the machine head's maximum sewing speed by 500rpm.
Stitch type U.S.A Code
1-needle overlock 504 04 2-needle overlock 514 14 2-needle safety stitch 516 16 3-needle safety stitch 43
Type Code
Variable top-feed R
Needle Overedging
gauge (mm) width (mm)
Feed dog Code
― 3.2 2-row 0D4 ― 4.0 2-row 0E4 ― 4.8 3-row 0F6 ― 6.4 2-row 0H4
2.0 3.2 2-row BD4
2.0 3.2 3-row BD6
2.0 4.0 3-row BE6
3.2 3.2 3-row DD6
3.2 4.0 2-row DE4
3.2 4.0 3-row DE6
4.8 4.8 3-row FF6
4.8 6.4 3-row FH6
4.8+2.0 3.2 3-row 1D6
Material Application
Special machine
Code
classification
Runstitching Standard 300
For general fabrics
Runstitching Upper looper high throw 307 Soft-chain
Throat plate and feed dog both provided with a lip
3F6
Specific to knits such as sweaters
Runstitching Upper looper extra high throw 40H Runstitching Standard 500
Runstitching Upper looper extra high throw 50H Runstitching For zipper attaching 50M
For heavy-weight materials
Runstitching Upper looper extra high throw 60H
Light- to medium-weight
Pneumatic auto-lifter Code
Standard type AK101 For the machine provided with T040 AK32
Medium- to heavy-weight
Medium- to heavy-weight materials such as denim
Built-in synchronizer
Set speed
Code
6,500rpm SY35
AC SERVOMOTOR (SC-380)/Machine head
MO69 R /AK101/SY35
Remarks
MO-6914R-BD4-307
LM
242.0 3.2 2 4 1:0.71:2 17.5 6.5 DC×27 #11 7,000 MO-6914R-BD6-307 2 4 2.0 3.2 3 4 1:0.71:2 17.5 6.5 DC×27 #11 7,000 MO-6914R-BE6-307 2 4 2.0 4.0 3 4 1:0.71:2 17.5 6.5 DC×27 #11 7,000 MO-6914R-BD6-40H
MH
242.0 3.2 3 4 1:0.71:2 17.5 6.5 DC×27 #11 7,000 MO-6914R-BE6-40H 2 4 2.0 4.0 3 4 1:0.71:2 17.5 6.5 DC×27 #11 7,000
2-needle overlock
For runstitching in general fabric
Upper looper extra high throw type
www.egemakine.com.tr
MO-6900R Series (September, 2003) 3/3
DEVISES AND ATTACHMENTS
Chain-off thread trimming device
Model Part No. Description
T039
MAT-039003A0 For 110, 115, 220, 240V
MAT-039004A0 For 220, 380, 415, 440V MAT-040005A0 For 110, 115, 220, 240V
T040
MAT-040006A0 For 220, 380, 415, 440V MAT-040005AA For 110, 115, 220, 240V MAT-040006AA For 220, 380, 415, 440V
T041 MAT-041000AB Pneumatic flat cutter T045 MAT-045000A0 Pneumatic side cutter (for overlock machine)
Pneumatic chain-off thread suction device
MC-4 Specific to chain-off thread, pedal-operated MC-5 Specific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips
Auto-lifter
AK32 GAK-320000A0 Pneumatic type (knee-operated) AK49 GAK-490000A0 Pneumatic type (pedal-operated) AK101 GAK-A01000A0 Pneumatic type (for servomotor)
Gathering device
S167 MAS-167000A0
Swing-type upper-cloth gathering device (interlocked with pedal)
PF-0552010-B0 Air regulator (F.R. unit asm.) GMD-01080000×2Fixing screw for F.R. unit asm. F1021-003-000 Tube connector (male)
GAS-12063000
One-touch connector Selection parts instead of the tube connector
MC-7A Blower-type chain-off thread suction device + cloth chips
Blower-type chain-off thread suction device
One-touch type tape cutter and chain-off thread trimming device (electromagnetic type)
Automatic tape cutter + chain-off thread trimming device (number-off-stitch control and electro­magnetic type)
[Reference]
Combination table of “chain-off thread suction device” and “auto-lifer” which correspond to “chain-off thread trimming device”.
Chain-off
thread
trimming
device
T039
T040
T041
or
T045
Chain-off
thread
suction
device
Auto-lifter
MC-7A AK101
(JUKI servomotor)
MC-8 AK101
(JUKI servomotor)
MC-9 (MC-9 is equipped with auto-lifter.)
MC-7A AK32 (any motor will do)
MC-5 AK32 (any motor will do)
MC-24 AK32 (any motor will do)
MC-7A AK101
(JUKI servomotor)
MC-8 AK101
(JUKI servomotor)
MC-9 (MC-9 is equipped with auto-lifter.)
For semi­sunken type
For fully­sunken type
Blind hemming device
L121 MAL-121000A0 Blind stitch hemming attachment A ruler used for blind hemming in knits
Piping folder
M056 MAM-0560J0A0 Piping folder This piping folder makes a piping first, then turns up the tape. M075 MAM-0750J0A0 Piping folder (to be used with knit tape)
This attachment can be used for both “cotton bias tape with gimp” and “knit tape”. The operation mode can be changed over with a fingertip control.
M076 MAM-0760N0A0 Ready-made piping folder
The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm.
M077 MAM-0770M0A0 Piping folder for gathering
The attachment makes gathers on the lower fabric while making decorative piping.
M222
MAM-2220M0A0
Piping folder upper-cloth gathering (finished width 12mm, tape width 26mm)
MAM-2220J0A0
Piping folder upper-cloth gathering (finished width 9mm, tape width 20mm)
M224 MAM-2240N0A0 Ready-made piping folder for upper-cloth gathering
Guide, Ruler
H153 MAH-153000A0 Cloth edge guide ruler (for overlock machine)
A swing type edge guide.
H154 MAH-154000A0 Cloth edge guide ruler (for safety stitch machine) Q141 MAQ-141000B0 Tape guide
The aforementioned devices are not equipped with air regulator.
Please purchase the following components when you need to regulate air pressure.
Model Part No. Description Feature
The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers.
This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less.
This folder is to be used together with upper-cloth gathering device S167. Gimp size that can be used is φ2 to φ2.5mm.
This folder is to be used together with upper-cloth gathering device S167. Tape, of which width is 8 to 18mm, can be used.
3
www.egemakine.com.tr
MO-6900C Series (September, 2003) 1/2
The cylinder-bed is bestsuited to the runstitching and blind hemming of tubular materials.
Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to enable sewing with a lower tension applied to the material, it achieves soft-feeling high­quality seams.
Since the machine is provided as standard with the bottom feed dog inclination-adjusting mechanism and the external differential feed­increasing mechanism, it can be easily adjusted to ideally match the material being sewn. In addition, the machine is provided as standard with a micro lifter feature that offers improved responsiveness to materials, and provides the operator with upgraded operability. The stitch length can be easily adjusted with the push-button mounted on the front surface of the sewing machine.
SPECIFICATIONS
SUBCLASS MACHINE LIST
Super-high-speed, Cylinder-bed, Overlock Machine

MO-6900C Series

MO-6914C
Seams Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge (mm)
Overedging width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed (rpm)
Bottom
differential-
feed ratio
Remarks
MO-6904C-0D6-307 1 3 3.2 3 3.5 1:0.81:2.3 7 DC×27 #11 8,000 MO-6904C-0E6-307 LM1 3 4.0 3 3.5 1:0.81:2.3 7 DC×27 #11 8,000 MO-6904C-0F4-307 1 3 4.8 2 3.5 1:0.81:2.3 7 DC×27 #14 8,000
1-needle overlock
Upper looper extra high throw type
MO-6914C-BD4-307 2 4 2.0 3.2 2 3.5 1:0.81:2.3 6.5 DC×27 #11 8,000 MO-6914C-BD6-307 LM2 42.0 3.2 3 3.5 1:0.81:2.3 6.5 DC×27 #11 8,000 MO-6914C-BE6-307 2 4 2.0 4.0 3 3.5 1:0.81:2.3 6.5 DC×27 #11 8,000
2-needle overlock
Upper looper extra high throw type
Model name MO-6904C MO-6914C Stitch type 1-needle overlock 2-needle overlock Stitch style in the U.S.A. 504 514 Max. sewing speed 8,000rpm Stitch length 0.8 3.5mm Needle gauge (mm) 2.0 Overedging width (mm) 3.2, 4.0, 4.8 3.2, 4.0 Differential feed ratio For gathering 1:2.3 (max. 1:4.5), For stretching 1:0.8 Needle bar stroke 24.5mm Inclination angle of the needle 20° Needle mechanism Needle bar method and upper/lower bushing Needle DC×27 Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) Stitch adjusting method By push-button Differential-feed adjusting method By lever Weight of the machine head 24kg Lubrication Automatic Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Provided as standard Needle thread heat remover Provided as standard Micro-lifter Provided as standard
3
www.egemakine.com.tr
MO-6900C Series (September, 2003) 2/2
WHEN YOU PLACE ORDERS
MO69 C
MO69 C /AK102/SY35
DEVISES AND ATTACHMENTS
Chain-off thread trimming device
Blower-type chain-off thread suction device
Pneumatic chain-off thread suction device
Auto-lifter
Blind hemming device
Cloth tensioner
Ruler, Miscellaneous
Model Part No. Description
T043 MAT-0430000A0 Pneumatic side cutter
MC-38 Pneumatic chain-off thread + cloth chips MC-39 Function of MC-8 + auto-lifter
AK93 GAK-930000A0 Pneumatic type (knee-operated) AK94 GAK-940000A0 Pneumatic type (with chain-off thread suction device) AK102 GAK-A02000A0 Pneumatic type (for servomotor)
PF-0552010-B0 Air regulator (F.R. unit asm.) GMD-01080000×2Fixing screw for F.R. unit asm. F1021-003-000 Tube connector (male)
GAS-12063000
One-touch connector Selection parts instead of the tube connector
MC-7B Blower-type chain-off thread suction device + cloth chips
[Reference]
Combination table of “chain-off thread suction device” and “auto-lifer” which correspond to “chain-off thread trimming device”.
Chain-off
thread
trimming
device
T043
Chain-off
thread
suction
device
Auto-lifter
MC-7B AK102
(JUKI servomotor)
*―
AK94
(any motor will do)
AK94 is equipped with chain-off thread suction device.
MC-38 AK102
(JUKI servomotor)
MC-39 (MC-39 is equipped with auto-lifter.)
The aforementioned devices are not equipped with air regulator.
Please purchase the following components when you need to regulate air pressure.
L124 MAL-124000A0 Blind stitch hemming attachment A ruler used for blind hemming in knits
MAL-125001A0 For 110, 115, 220, 240V
L125
MAL-125002A0 For 220, 380, 415, 440V MAL-125001AA For 110, 115, 220, 240V MAL-125002AA For 220, 380, 415, 440V
Automatic folded­edge controlled blind hemming device
For flat upper knife
For square upper knife
Model Part No. Description Feature
The attachment automatically detects the overlapped section of a material. Then, it makes the needle enter the material deeper to prevent stitch deviation.
H153 MAH-153000A0 Cloth edge guide ruler A swing type edge guide.  ― 122-26155 Cloth plate Wider material can be sewn by attaching the cloth plate.
TR01 Small-diameter roller for rib attaching TR02 Large-diameter cloth tensioner
Stitch type U.S.A Code
1-needle overlock 504 04 2-needle overlock 514 14
Type Code
Cylinder-bed C
Needle Overedging
gauge (mm) width (mm)
Feed dog Code
― 3.2 3-row 0D6 ― 4.0 3-row 0E6 ― 4.8 2-row 0F4
2.0 3.2 2-row BD4
2.0 3.2 3-row BD6
2.0 4.0 3-row BE6
Material Application
Special machine
Code
classification
Light- to medium-weight
For general fabrics Runstitching Upper looper high throw 307
Pneumatic auto-lifter Code
Standard type AK102
Built-in synchronizer
Set speed Code
7,500rpm SY35
AC SERVOMOTOR (SC-380)/Machine head
www.egemakine.com.tr
MO-6900G Series (September, 2003) 1/2
SUBCLASS MACHINE LIST
Bottom-feed, Overlock / Safety Stitch Machine for Extra heavy-weight materials

MO-6900G Series

MO-6916G
Model name MO-6904G MO-6914G MO-6916G Stitch type 1-needle overlock 2-needle overlock Safety stitching Stitch style in the U.S.A. 504 514 516 Max. sewing speed 6,000rpm Stitch length 2.55mm 2.54mm 2.55mm Needle gauge (mm) 2.6 4.8 Overedging width (mm) 4.8, 10.0, 18.0 6.4 4.8, 6.4
Differential feed ratio
For gathering 1:1.75 (max. 1:3.8) For gathering 1:2 (max. 1:3.8) For gathering 1:1.75 (max. 1:3.8) For stretching 1:0.7 (max. 1:0.6) For stretching 1:0.8 (max. 1:0.6) For stretching 1:0.7 (max. 1:0.6)
Needle bar stroke 28.8mm Inclination angle of the needle 20° Needle bar bushing Upper/lower bushing method Needle DO×5 (excluding some subclass model) Max. lift of the presser foot 8mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) Stitch adjusting method By push-button Differential-feed adjusting method By lever (with micro-adjustment) Weight of the machine head 28kg Lubrication Automatic Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Provided as standard (excluding some subclass model) Needle thread heat remover Provided as standard Micro-lifter Provided as standard
MO-6903G-0N6-3D1 LM1 2 18.0 3 7 −−5DO×5 #16 5,500 For splicing fabrics
MO-6904G-0F6-700 1 3 4.8 3 5 1:0.71:1.75 8DO×5 #21 6,000
For runstitching extra heavy- weight materials such as denim
MO-6905G-0M6-700 1 3 10.0 3 7 −−7DC×1 #24 4,000
For overedging carpets, mats for entrance halls, etc.
MO-6905G-0M6-7E0
EH
13 10.0 3 7 −−7DC×1 #24 4,000 For overedging car mats MO-6914G-CH6-700 2 4 2.6 6.4 3 4 1:0.81:2 8DO×5 #18 6,000 For overedging jersey, etc. MO-6916G-FF6-700 2 5 4.8 4.8 3 5 1:0.71:1.75 8DO×5 #21 6,000 MO-6916G-FH6-700 2 5 4.8 6.4 3 5 1:0.71:1.75 8DO×5 #21 6,000
For safety stitching extra heavy-weight materials such as denim
Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge
(mm)
Overedging
width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed
(rpm)
Bottom
differential-
feed ratio
Remarks
Longitudinal
stroke
of top-feed
dog (mm)
The machine incorporates a mechanism and parts that are optimum for the sewing of extra heavy-weight materials, such as an extra high-lift type upper looper, tractor foot and coarse type feed dog. It demonstrates an excellent performance ability in the sewing of various kinds of heavy-weight materials such as jeans, raised fabric materials, mats and carpets.
The machine securely clamps the material at the beginning of sewing as well as smoothly sewing multi-layered parts of the material to facilitate the sewing of extra heavy-weight materials.
SPECIFICATIONS
3
www.egemakine.com.tr
MO-6900G Series (September, 2003) 2/2
WHEN YOU PLACE ORDERS
MO69 G
Stitch type U.S.A Code
For splicing fabrics 503 03 1-needle overlock 504 04 For overedging carpets 505 05 2-needle overlock 514 14 2-needle safety stitch 516 16
Remarks Code
For splicing fabrics 3D1 For extra heavy-weight
materials (jeans, car mats etc.)
700
For car mats 7E0
Type Code
Extra heavy-weight materials
G
Needle Overedging
Feed dog Code
gauge (mm) width (mm)
18.0 3-row 0N6 4.8 3-row 0F6 10.0 3-row 0M6
2.6 6.4 3-row CH6
4.8 4.8 3-row FF6
4.8 6.4 3-row FH6
www.egemakine.com.tr
MO-6900J Series (September, 2003) 1/2
SPECIFICATIONS
SUBCLASS MACHINE LIST
Variable Top-feed, Overlock / Safety Stitch Machine for Extra heavy-weight materials

MO-6900J Series

MO-6916J
Model name MO-6904J MO-6914J MO-6916J Stitch type 1-needle overlock 2-needle overlock Safety stitching Stitch style in the U.S.A. 504 514 516 Max. sewing speed 6,000rpm Stitch length 2.55mm 2.54mm 2.55mm Needle gauge (mm) 2.6 4.8 Overedging width (mm) 4.8 6.4 4.8, 6.4
Bottom differential feed ratio
For gathering 1:1.75 (max. 1:3.8) For gathering 1:2 (max. 1:3.8) For gathering 1:1.75 (max. 1:3.8) For stretching 1:0.7 (max. 1:0.6) For stretching 1:0.8 (max. 1:0.6) For stretching 1:0.7 (max. 1:0.6)
Needle bar stroke 28.8mm Inclination angle of the needle 20° Needle bar bushing Upper/lower bushing method Needle DO×5 (excluding some subclass model) Vertical stroke of top feed dog 8.5mm Longitudinal stroke of top feed dog 2.77mm (it differs with the machine's specifications.) Max. lift of the presser foot 8mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) Stitch adjusting method By push-button Bottom differential feed adjusting method
By lever (with micro-adjustment)
Top differential feed adjusting method By lever (with micro-adjustment) Weight of the machine head 29kg Lubrication Automatic Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Provided as standard Needle thread heat remover Provided as standard Micro-lifter Provided as standard
MO-6904J-0F6-700 1 3 4.8 3 5 1:0.61:1.75 2.778 DO×5 #21 6,000
For runstitching extra heavy- weight
materials such as denim MO-6914J-CH6-700 EH 2 4 2.6 6.4 3 4 1:0.71:2 2.778 DO×5 #18 6,000 For overedging jersey, etc. MO-6916J-FF6-700 2 5 4.8 4.8 3 5 1:0.61:1.75 2.778 DO×5 #21 6,000 MO-6916J-FH6-700 2 5 4.8 6.4 3 5 1:0.61:1.75 2.778 DO×5 #21 6,000 MO-6916J-FF6-70Q 2 5 4.8 4.8 3 5 1:0.7〜1:1.75 2.7〜78DC×27 #16 6,000
For safety stitching bathrobe, etc.
For safety stitching extra heavy-weight materials such as denim
Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge
(mm)
Overedging
width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed
(rpm)
Bottom
differential-
feed ratio
Remarks
Longitudinal
stroke
of top-feed
dog (mm)
The machine incorporates a mechanism and parts that are optimum for the sewing of extra heavy-weight materials, such as an extra high-lift type upper looper, tractor foot and coarse type feed dog. It demonstrates an excellent performance ability in the sewing of various kinds of heavy-weight materials such as jeans, raised fabric materials, mats and carpets.
The MO-6900J Series comes with a newly-developed feed mechanism that moves the top and bottom feeds separately. With its improved feeding capacity and stronger cloth-biting force, the feed mechanism prevents uneven material feed when sewing extra heavy­weight materials.
3
www.egemakine.com.tr
MO-6900J Series (September, 2003) 2/2
WHEN YOU PLACE ORDERS
MO69 J
DEVISES AND ATTACHMENTS
Chain-off thread trimming device
Blower-type chain-off thread suction device
Pneumatic chain-off thread suction device
Auto-lifter
Model Part No. Description
MO- MO-
6900G 6900J
T039
MAT-039001A0 For 110, 115, 220, 240V
〇〇
MAT-039002A0 For 220, 380, 415, 440V
T040
MAT-040001A0 For 110, 115, 220, 240V
〇〇
MAT-040002A0 For 220, 380, 415, 440V MAT-040001AA For 110, 115, 220, 240V MAT-040002AA For 220, 380, 415, 440V
T048
MAT-048010A0
Pneumatic flat cutter (for overlock stitch machine)
〇−
MAT-048010B0 −〇
T050
MAT-050010A0
Pneumatic flat cutter (for safety stitch machine)
〇−
MAT-050010B0 −〇
MC-4 Specific to chain-off thread, pedal-operated 〇〇 MC-5 Specific to chain-off thread 〇〇 MC-8 Pneumatic chain-off thread + cloth chips 〇〇 MC-9 Function of MC-8 + auto-lifter 〇〇 MC-24 Pneumatic chain-off thread + cloth chips 〇〇
MC-7A Blower-type chain-off thread suction device + cloth chips 〇〇
[Reference]
Combination table of “chain-off thread suction device” and “auto-lifer” which correspond to “chain-off thread trimming device”.
Chain-off
thread
trimming
device
T039
T040
T048
or
T050
Chain-off
thread
suction
device
Auto-lifter
MC-7A AK101 (JUKI servomotor)
MC-8 AK101 (JUKI servomotor)
MC-9
−(MC-9 is equipped with auto-lifter.)
MC-7A AK32 (any motor will do)
MC-5 AK32 (any motor will do)
MC-24 AK32 (any motor will do)
MC-7A AK101 (JUKI servomotor)
MC-8 AK101 (JUKI servomotor)
AK52 (any motor will do)
*−
AK52 is equipped with
chain-off thread suction device.
MC-9
−(MC-9 is equipped with auto-lifter.)
One-touch type tape cutter and chain­off thread trimming device (electromagnetic type)
For semi­sunken type
For fully­sunken type
AK32 GAK-320000A0 Pneumatic type (k nee-operated) 〇〇 AK49 GAK-490000A0 Pneumatic type (pedal-operated) 〇〇 AK52 GAK-520000A0 Pneumatic type (with chain-off thread suction device) 〇〇 AK101 GAK-A01000A0 Pneumatic type (for servomotor) 〇〇
PF-0552010-B0 Air regulator (F.R. unit asm.) 〇〇
GMD-01080000×2Fixing screw for F.R. unit asm. 〇〇
F1021-003-000 Tube connector (male) 〇〇
GAS-12063000
One-touch connector
Selection parts instead of the tube connector
〇〇
The aforementioned devices are not equipped with air regulator. Please purchase the following
components when you need to regulate air pressure.
Automatic tape cutter + chain-off thread trimming device (number-off-stitch control and electromagnetic type)
Stitch type U.S.A Code
1-needle overlock 504 04 2-needle overlock 514 14 2-needle safety stitch 516 16
Remarks Code
For extra heavy-weight materials (jeans, car mats etc.)
700
For extra heavy-weight materials (
bathrobe etc.
)
70Q
Type Code
Variable top-feed for extra heavy-weight materials
G
Needle Overedging
Feed dog Code
gauge (mm) width (mm)
4.8 3-row 0F6
2.6 6.4 3-row CH6
4.8 4.8 3-row FF6
4.8 6.4 3-row FH6
www.egemakine.com.tr
LB-3, LB-4 (September, 2003) 1/1
Overlock Machine with Semi-automatic Backlatch Device [1-needle]
MO-604S-0E6-300/LB-3
[2-needle]
MO-614S-BE4-307/LB-4
Variable Top-feed Overlock Machine with Semi-automatic Backlatch Device
[1-needle]
MO-6904R-0E6-300/LB-3
[2-needle]
MO-6914R-BE4-307/LB-4
MO-6914S-BE4-307/LB-4
MO6 04S0E6300/LB3
Model Code
MO-6704S 7 MO-6904S 9
MO6 14SBE4307/LB4
Model Code
MO-6714S 7 MO-6914S 9
Auto-lifter Compressed air
Provided as standard
0.5 MPa (5kgf/F )
Aided by the precise control of the stitch number provided by the material-edge sensor and SC-380 motor/controller, the tension-release mechanism is activated during production of chain-off thread at both the start and end of sewing so that thin chain-off thread can be produced. The chain-off thread is completely tucked into the finished seam on the material to achieve a beautifully finished sewing product.
For the 2-needle overlock machine, the throat plate intermediate claw automatically moves backward at the end of sewing so that the chain-off thread can be guided to the needle thread retainer without getting caught by the claw. At the start of the next sewing, the chain-off thread is rolled into the stitches to the material edge, giving the seam a beautiful finish.
For both 1-needle and 2-needle overlock machines, the tension-release function can be disabled by setting the material edge sensor in the OFF state. In addition, for 2-needle machines, the intermediate claw of the throat plate can be fixed with projected. This means that the machine can be used as a standard machine with standard specifications for processes not requiring the backlatching capability such as continuous stitching and runstitching, thereby saving on new equipment.
SPECIFICATIONS
For specifications not listed above, refer to the respective model
catalogs.
WHEN YOU PLACE ORDERS
MO6904R0E6300/LB3 M
O
6914RBE4307/LB4
Overlock Machine
PSC box
(1-needle)
(2-needle)
Variable Top-feed Overlock Machine
(1-needle)
(2-needle)
Throat plate intermediate claw backward
Throat plate intermediate claw backward
Throat plate intermediate claw forward/backward mechanism
(for 2-needle machines)
SC-510/M51
JUS: North America and Central and South America.
SC510 S
Control box Code
Standard S
PSC box Code
For JUS
(LA) Single-phase 100〜120V PFL S For JUS*,General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For JUS*(LA) Single-phase 200〜240V PFL U
M51
Motor for SC
3
www.egemakine.com.tr
LZ-2290A Series (September, 2003) 1/4
It comes in two different models, one with standard specifications and the other with an anti-material slip capability. For both models, there are two subclass models, i.e., the "minute-quantity lubrication type" and the "dry-head type", which eliminates oil stains on sewing products. You may select the best-suited model from the diversified subclasses according to your applications. The machine is also provided with a newly-developed operation panel, the IP-100. With this operation panel, you can easily establish settings for stitch shapes and stitches, as well as conduct setup changing, thereby achieving further increased availability.
The machine is provided as standard with fourteen different basic zigzag stitching patterns grouped into eight different types. You can choose the zigzag stitching pattern you want directly on the operation panel (IP-100) of the machine body. The zigzag width, needle throw position and number of blind stitches can also be easily adjusted on the operation panel.
SPECIFICATIONS
Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine

LZ-2290A Series

LZ-2290A-SS-7-WB
Machine head type Dry-head type Minute-quantity lubrication type
Model name
Without automatic thread trimmer
LZ-2290A-DS LZ-2290A-DU LZ-2290A-SS LZ-2290A-SU
With automatic thread trimmer
LZ-2290A-DS-7 LZ-2290A-DU-7 LZ-2290A-SS-7 LZ-2290A-SU-7
Type Standard
Anti-material-slip
Standard
Anti-material-slip
capability type capability type
Max. sewing speed
4,000rpm 5,000rpm 4,500rpm
(for standard zigzag stitching, the zigzag width (for standard zigzag stitching, the zigzag width
has to be set to 5mm or less.) has to be set to 4mm or less.)
Max. zigzag width 10mm (in increments of 0.1mm) Needle throw mechanism Computer-controlled
Max. feeding amount
5.0mm 2.5mm 5.0mm 2.5mm Stepless fine adjustment
Lift of the presser foot By hand: 5.5mm/By knee: 10mm Hook
Exclusive no-lubricating hook
(plastic hook with special-purpose race surface)
DP hook (with titanium-treated inner hook)
Thread take-up Rotary type Needle (at the time of delivery) SCHMETZ438(#75), ORGAN DP×5(#10) Number of patterns for standard stitching
8 types/14 patterns
Internal memory Max. 20 patterns
Extended memory Max. 999 patterns Max. number of stitches 500 stitches/pattern Continuous stitching pattern Max. 10 patterns, 20 step, 500 stitches/step Input function of the main unit Provided as standard (operation panel) Bobbin thread winder Built-in machine head Machine head drive Compact AC servomotor (direct-drive system)
Lubrication No lubrication
Minute-quantity lubrication to needlebar and
hook (no oil pan system)
Lubricating oil
JUKI New Defrix Oil No.1
(equivalent to ISO VG7)
Distance from needle to machine arm 300mm Bed size 517mm×178mm Power requirement/
Power consumption
Single-phase 100〜120V, 200240V, 3-phase 200240V/Power rating 600VA
Total weight
98kg (for the model without automatic thread trimmer) 100kg (for the model with automatic thread trimmer)
Custom pattern memory capacity
4
www.egemakine.com.tr
LZ-2290A Series (September, 2003) 2/4
WHEN YOU PLACE ORDERS
SEWING PATTERN
LZ2290A LZ2290A 7
SC915 SIP100A
Without automatic thread trimmer
PSC box/Operation panel for SC
With automatic thread trimmer
Control box Code Standard S
Operation panel Code IP-100A IP100A
Machine head type Code
Standard S Dry-head D
Machine head type Code
Standard S Dry-head D
Type Code
Standard S Anti-material-slip type U
Type Code
Standard S Anti-material-slip type U
Push-button-type reverse feed switch Code
Provided 0B Not provided
For LZ-2290A-SU (anti-material-slip capability), select "Not provided."
Device/Attachment Code
Auto-lifter (pedal-driven) AK121 Not provided
PSC box Code
For JUS
Single-phase 100〜120V PFL C For JUS*, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For CE Single-phase 200240V PFL N
JUS: North America and Central and South America.
Wiper/Push-button-type reverse feed switch
Wiper
Push-button-type reverse feed switch
Code
Provided Provided WB
OPTIONS
Model Part No. Description Features
 − 400-10795 Automatic reverse feed kit
 − 400-03640 Optional switch kit
AK121 GAK-A21000B0 Auto-lifter (pedal-driven)
D1501-583-H00 Presser bar D1502-583-H00 Presser connecting rod
B1551-586-000 Presser foot connecting foot SS-7090910-SP Screw
 − 225-26560 Hard-point hook 235-23152 Hook
 − 235-22550 Bobbin caseasm. 235-23004 Bobbin
V059 MAV-059000AA Tension-free feeder (Tape feeder)
S189A MAS-189000AA Pneumatic type S189B MAS-189000AB Solenoid type
Presser foot connecting components (Replaceable presser bar)
Presser foot connecting components
Hook with non-rotational bobbin
Elastic tape tensing device
When this device is installed, the LZ-2290A-□□(without automatic thread trimmer) can perform reverse feed operation. (The mirroring switch for scallop stitching is used as the push­button-type reverse feed switch.)
This handy switch is used to control various functions
*.It is
most effective when operating the machine in a standing position. (Needle up/down correction, 1-stitch correction, reverse-
stitch correction, auto lifter and thread trimmer, etc.)
The aforementioned parts are used when a lockstitching type presser foot is installed on the machine.
The blade point of this hook prevents abrasion. The hook with non-rotational bobbin eliminates sewing troubles
resulting from bobbin idling. It provides a uniform bobbin thread tension at all times, thereby guaranteeing a consistent stitch formation.
The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation.
Applies tension to desired portions of the tape fed from tension­free tape puller. The device is started/stopped by operating the knee switch. This increases operator productivity without interrupting the sewing work.
Name of
pattern
Stitch
pattern
Number of
stitches
1246 24
Straight
stitch
Standard
zigzag
2-step
zigzag
3-step zigzag
Standard Crescent
Equal­width
Equal-
width
Standard Crescent
Equal-
width
Equal­width
Scallop (left) Scallop (right) Blind
stitch
(left)
Blind stitch
(right)
Custom pattern
12 24 12 2 + α
Max. 500
www.egemakine.com.tr
LZ-2290A Series (September, 2003) 3/4
LIST OF THE MAJOR GAUGES
Max. zigzag width
/ Max. feed pitch
Throat plate Feed dog Presser foot (with finger guard) Remarks
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 1.3mm
(at the time of delivery: dry-head type)
(at the time of delivery)
(at the time of delivery)
Max. feed amount: 5mm
Max. feed amount: 2.5mm
Max. feed amount: 1.6mm
With a recess on the reverse side of the presser foot
Light-in-weight type
Light-in-weight type
Light-in-weight type
Light-in-weight type
Presser foot with tape guide
Front fulcrum type
Light-in-weight type with the front fulcrum
Light-in-weight type with the front fulcrum
• Suited to sewing tasks that require frequent changes in the needle throw position.
• Light -in-weight presser foot prevents jumping at the time of high-speed sewing.
Max. 15.6
Max. 2
(at the time of delivery)
4
www.egemakine.com.tr
LZ-2290A Series (September, 2003) 4/4
Max. zigzag width
/ Max. feed pitch
Throat plate Feed dog Presser foot (with finger guard) Remarks
Max. feed amount: 1.3mm
Max. feed amount: 2.5mm
Max. feed amount: 2.5mm
Max. feed amount: 5mm
Max. feed amount: 2.5mm
Max. feed amount: 5mm
Max. feed amount: 2.5mm
Max. feed amount: 5mm
• For standard zigzag stitching
• For attaching tape to brassieres, etc.
• Max. feed is 5 mm for the LZ-2290A-SS(-7). Since the max. feed is 2.5 mm for the LZ-2290A-SU(-7), gauges have to be selected with care.
• In addition to the above-listed ones, many different gauges and attachments for zigzag stitching are available. Please contact us for details.
Light-in-weight type
Light-in-weight type
Light-in-weight type
Light-in-weight type
Light-in-weight type
Light-in-weight type with the front fulcrum
www.egemakine.com.tr
LZ-2290A-SR-7 (August, 2004) 1/4
The machine is built around the newly developed LZ-2290A-7 machine head. In addition to the conventional types of stitching, the machine is able to perform T-shape stitching and zigzag pattern stitching to broaden its range of applications.
In addition to the conventional eight types and 14 patterns of zigzag stitching, the machine is able to perform T-shape stitching and covering stitching. As a result, the machine is equipped as standard with a 14-type and 20-pattern sewing capability. Furthermore, the machine is able to perform condensation stitching (for reverse feed stitching) at a high speed during sewing to dramatically increase the operating rate of the facility.
For men's garments, the machine is used in processes such as topstitching for welt pockets, sewing collar cloths and sewing labels. For ladies' garments, it can perform pattern stitching for the collars and front bodies of jackets and blouses. In addition, original patterns can be created using the custom pattern feature, enabling the machine to be utilized for a broader range of uses.
SPECIFICATIONS
Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine with Automatic Thread Trimmer (quick reverse type)

LZ-2290A-SR-7

LZ-2290A-SR-7-WB
Model name Max. sewing speed Max. zigzag width
3
Max. feed amount Needle throw mechanism Lift of the presser foot Needle (at the time of delivery) Hook Thread take-up Number of patterns for standard stitching Custom pattern memory capacity Max. number of stitches
Input function of the main unit Memory medium
Machine head drive Lubrication Distance from needle to machine arm/Bed size Power requirement /Power consumption Total weight
LZ-2290A-SR-7-WB
5,000rpm
1,
T-shape stitching: 4,000rpm
2
10mm
5.0mm (normal /reverse feed) Computer-controlled
By hand: 5.5mm/By knee: 10mm
SCHMETZ438 (#75)
DP hook (with titanium-treated inner hook) Hook-driving shaft offset mechanism
Rotary type
14 types /20 patterns
Internal memory: Max. 20 patterns /Extended memory : Max. 999 patterns
Max. 500 stitches/patterns
The main unit has been provided as standard with a data input device (IP-100D operation panel)
Programming software for computer-controlled sewing machines (PM-1:option)
EEP-ROM (internal) /SmartMedia (extended)
Compact AC servomotor (direct-drive system)
Minute-quantity lubrication to needle bar and hook (no oil pan system)
300mm/517mm×178mm
Single-phase 200〜240V, 3-phase 200240V/Power rating 600VA
104kg
1The maximum sewing speed is factory-set to 4,000 rpm at the time of shipping (depending on the region to which the machine is to be shipped).2The maximum sewing speed of the machine varies depending on the zigzag width and feed amount settings.
• Since the speed is controlled with the zigzag width and feed amount per stitch, it is thus limited by the zigzag width and feed amount settings for a sewing pattern.
• The sewing speed should be appropriately set according to the sewing product and process.
3The maximum zigzag width has been factory-limited to 8 mm, at the time of standard shipping.
4
www.egemakine.com.tr
LZ-2290A-SR-7 (August, 2004) 2/4
WHEN YOU PLACE ORDERS
SEWING PATTERN
LZ2290ASR7WB
SC916 SIP100D
Machine head
PSC box/Operation panel for SC
Model
––
AK121
––
––
––
V059
S189A
S189B
––
––
––
Part N o.
400-03640
GAK-A21000B0 D1501-583-H00 D1502-583-H00 B1551-586-000 SS-7090910-SP 225-26560
MAV-059000AA
MAS-189000AA
MAS-189000AB 40017095
22591564 10064004 10061554 MAN09700BA0 SS5110710SP HX005750000
Description
Optional switch kit
Auto-lifter (pedal-driven) Presser bar Presser connecting rod Presser foot connecting foot Screw Hard-point hook
Tension-free feeder (Tape feeder)
Pneumatic type
Solenoid type Thread tension disk asm.
Presser foot asm. Feed dog Throat plate asm. Fagoting folder asm. Screw SmartMedia card 16MB
Feature
This handy switch is used to control various functions*. It is most effective when operating the machine in a standing position. (Needle up/down correction, 1-stitch correction, reversestitch correction, auto lifter and thread trimmer, etc.)
––
The aforementioned parts are used when a lockstitching type presser foot is installed on the machine.
The blade point of this hook prevents abrasion. The amount of tape to be fed can be adjusted in accordance
with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation.
Applies tension to desired portions of the tape fed from a tension-free tape puller. The device is started/stopped by operating the knee switch. This increases operator productivity without interrupting the sewing work.
––
OPTIONS
Machine head type Code Standard S
PSC box Code
For General Export 3-phase 200240V D For General Export Single-phase 200240V K For CE Single-phase 200240V N
Control box Code Standard S
Operation panel Code IP100D IP100D
Type Code
Quick reverse type R
Wiper
Push-button-type reverse feed switch
Code
Provided Provided WB
Device / Attachment Code
Auto-lifter (pedal-driven) AK121 Not provided
Name of
pattern
Stitch pattern
Straight
stitch
Standard
zigzag
2-step zigzag
Blind stitch
(left)
Blind stitch
(right)
Custom
pattern
3-step zigzag
Scallop (left)
Standard Crescent Equal-width Standard Crescent Equal-widthEqual-width
Scallop (r ight)
Equal-width
Number of
stitches
1246
666633
12 2424 12
Max.500
T-shape
stitching (left)
T-shape
stitching (right)
Pattern
stitching 1
Pattern
stitching 2
(fagoting)
Pattern
stitching 3
Pattern
stitching 4
2+a
Name of
pattern
Stitch pattern
Number of
stitches
Presser foot connecting components (Replaceable presser bar)
Presser foot connecting components
Elastic tape tensing device
Dual disks
Gauge set for fagoting
www.egemakine.com.tr
LZ-2290A-SR-7 (August, 2004) 3/4
LIST OF THE MAJOR GAUGES
Max zigzag width /Max feed pitch
Throat plate Feed dog Presser foot (with finger guard)
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 5mm
Max. feed amount: 2mm
Max. feed amount: 5mm
Max. feed amount: 2.2mm
Max. feed amount: 1.3mm
Light-in-weight type
(at the time of delivery)
(at the time of delivery)
Light-in-weight type with the front fulcrum
Light-in-weight type
Front fulcrum type
Light-in-weight type
Light-in-weight type
Presser foot with a tape guide
Threed cutter knife
CB type: at the time of delivery
(at the time of delivery)
With a recess on the reverse side of the presser foot
Max. 15.6
Using two trimming knives.
Max.
4
www.egemakine.com.tr
LZ-2290A-SR-7 (August, 2004) 4/4
Max zigzag width / Max feed pitch
Throat plate Feed dog Presser foot (with finger guard)
Max. feed amount: 2.5mm
Max. feed amount: 1.6mm
Max. feed amount: 1.3mm
Max. feed amount: 2.5mm
Max. feed amount: 2.5mm
Max. feed amount: 2.5mm
Max. feed amount: 2.5mm Max. feed amount: 5mm
Max. feed amount: 2.5mm Max. feed amount: 5mm
Max. feed amount: 2.5mm Max. feed amount: 5mm
Threed cutter knife
Presser foot with a knife
Light-in-weight type with the front fulcrum
Light-in-weight type
Light-in-weight type
Light-in-weight type with the front fulcrum
Light-in-weight type
Light-in-weight type
Light-in-weight type
Light-in-weight type
Two different part numbers are assigned to one presser foot ( ex. 22547962 and 22547970), if you place a order for 22547962 ( left number ), factory supplies you presser foot installed with a big figure guide, 22547970 ( right number ) with small finger guide respectively.
Using one trimming knife.
www.egemakine.com.tr
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 1/6
LZ-2284N-7-WB/CP-160B
The hook driving shaft offset mechanism assures trouble-free and consistent zigzag stitching.
The market-proven hook and thread take-up lever enables sewing with upgraded consistency with a lower tension applied to the thread.
Greater durability is secured by preventing the hook from heating up when the machine is running at high speeds.
The highly reliable machine head is structured to reduce operating noise and prevent oil leakage.
The machine ensures easy adjustment of zigzag width and feed pitch.
The adjustable range of the feed mechanisms has been widened,
thereby upgrading the machine's responsiveness to materials.

LZ-2280N SERIES

The standard zigzag stitching machine creates softly finished seams. The needle rocking mechanism is provided with a triangular cam which helps produce beautiful seams with consistency.
LZ-2280N
(standard zigzag)
The maximum needle throw is 10mm. The needle rocking mechanism means a higher degree of accuracy, thereby leading to a very high performance.
LZ-2286N
(3-step zigzag)
The pressure of the fagoting holder can be separately adjusted by the left- and right-hand sections in order to prevent an uneven material feed.
LZ-2285N
(fagoting)
The machine is able to perform eleven different kinds of zigzag stitching only by a quick procedure to replace the cams.
LZ-2288N
(with changeable pattern cams)
The machine incorporates a built-in lower knife that trims only the lower material. This allows the machine to simultaneously attach lace to the body of the foundation and trim only the body during processes to attach lace to the bottoms or tops of slips or to the joint seam lines of shorts.
LZ-2282N
(standard zigzag/with lower knife)
LZ-2282N-7
Two kinds of gauges can be selec ted in accordance with the application of the machine: an A-type gauge with a zigzag width
of 5mm, and a B-type gauge with a zigzag width of 8mm. The needle rocking cam is provided with a triangular cam which helps produce beautiful seams with consistency.
LZ-2281N
(standard wider zigzag)
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine with anti-material-slip capability
With its newly developed feed mechanism, the machine prevents “uneven feed of the upper and lower cloths” when sewing girdles and body suits made of slippery, elastic materials.
Drop-feed sewing machines have been widely said to feed in the lower cloth more quickly than the upper cloth. However, this machine prevents uneven feed between the upper and lower cloths in spite of its a drop-feed mechanism. In appearances, the gauge parts are identical to those of a conventional zigzag stitching machine, and operability is in no way affected by the newly developed feed mechanism.
(standard zigzag/with lower knife and automatic thread trimmer)
The operator can easily switch the needle-throwing pattern between the standard and 3-step zigzag stitching patterns using the lever located in the free space under the arm. (Time required: Approx. 15 sec) When changing the sewing product or design, there's no need to adjust the sewing machine head or machine layout.
LZ-2284N LZ-2284N-7
(with standard/3-step zigzag stitching pattern changeover function and automatic thread trimmer)
(with standard/3-step zigzag stitching pattern changeover function)
LZ-2280NU
(standard zigzag)
LZ-2284NU LZ-2284NU-7
(with standard/3-step zigzag stitching pattern changeover function)
(with standard/3-step zigzag stitching pattern changeover function and automatic thread trimmer)
4
www.egemakine.com.tr
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 2/6
SPECIFICATIONS
Model name
Without automatic thread trimmer
With automatic thread trimmer
LZ-2280N
―
LZ-2281N
―
Standard zigzag
5,500rpm
5.0mm
2.5mm
―
Standard wider
zigzag
LZ-2282N
LZ-2282N-7
Standard zigzag
(with lower knife)
LZ-2284N
LZ-2284N-7
Standard/
3-step zigzag
LZ-2286N
―
3-step zigzag
LZ-2288N
―
With changeable
pattern cams
Refer to the specifications for pattern cam
LZ-2285N
―
LZ-2288N: Selectable from five different cams; Standard zigzag stitching cam, 3-step zigzag stitching cam, 2-step zigzag stitching cam,
standard scalloping cam, crescent scalloping cam. Other cams are optionally available.
4,500rpm
Stitch system
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. feeding amount
Min. cutting allowance of lower knife
Lower knife driving method
Lift of the presser foot
Hook Thread take-up Lubrication Lubricating oil Needle
(at the time of delivery) Needle position
changing mechanism Reverse feed stitching
mechanism Needle throw direction
change-over mechanism Needle throw pattern
cam Number of pattern cams
specified
Model name
Without automatic thread trimmer
With automatic thread trimmer
LZ-2280NU
―
LZ-2284NU
LZ-2284NU-7
Stitch system
Max. sewing speed
5.0mm (A type)
8.0mm (B type)
2.5mm (A type)
5.0mm (B type)
―
4.5mm
2.5mm
3.0mm
AC motor
10.0mm
2.0mm
―
5.0mm (standard)
10.0mm (3-step)
2.5mm (standard)
2.0mm (3-step)
―
Fagoting
4,000rpm
8.0mm
2.2mm
By hand: 5.5mm By knee: 8.0mm
8.0mm
(standard: 6.0mm)
2.5mm
―
By hand: 5.5mm, By knee: 10.0mm
By hand: 4.0mm By knee: 8.5mm
By hand: 5.5mm, By knee: 10.0mm
DP hook (with titanium-treated inner hook)
Rotary type
Fully automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
SCHMETZ 438SUK (Nm75), ORGAN DP×5 (#10)
Provided as standard
Provided as standard
Triangular cam
Provided as
standard
Grooved cam
SCHMETZ
438SUK (#80)
―
5,000rpm
―――――11*―
―――――
Anti-material-slip type
www.egemakine.com.tr
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 3/6
Code
0N 0NU 1NA 1NB 2N 4N
4NU
4NT
6N 6NT 8NA 8NB 8NC 8ND 8NE 5N
WHEN YOU PLACE ORDERS
LZ228
LZ228 7
LZ-2280N series (without automatic thread trimmer)
LZ-2280N-7 series (with automatic thread trimmer)
Automatic reverse feed function
Provided Not provided
Code
0B
Auto-lifter
Provided (AK83) Not provided
Code
AK
LZ-2284NT, -2286NT and -2285N are not classified by the automatic reverse feed function.
Wiper and automatic reverse feed function
Wiper
Not provided
Provided
Code
00
0B W0 WB
Automatic reverse feed function
Not provided Provided Not provided Provided
Type
Standard zigzag Standard zigzag/with anti-material-slip capability Standard wider zigzag (with a gauge for 5mm zigzag width) Standard wider zigzag (with a gauge for 8mm zigzag width) Standard zigzag/with lower knife With standard/3-step zigzag stitching pattern changeover function With standard/3-step zigzag stitching pattern changeover function
and anti-material-slip capability With standard/3-step zigzag stitching pattern changeover function
and with tape attaching foot capability 3-step zigzag 3-step zigzag/with tape attaching foot With changeable pattern cams/Standard zigzag With changeable pattern cams/3-step zigzag With changeable pattern cams/2-step zigzag With changeable pattern cams/Standard scalloping With changeable pattern cams/Crescent scalloping Fagoting
Type Code
Standard zigzag (anti-material-slip type)
2N
Standard/3-step zigzag 4N Standard/3-step zigzag
(anti-material-slip type)
4NU
SC910 S
M91S
PSC box
Motor for SC Operation panel
Operation panel Code
IP-100B IP100B CP-160B CP160B
Pulley belt Code Standard S
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S
For JUS
, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
Control box Code Standard S
4
www.egemakine.com.tr
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 4/6
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
LZ-2288N SPECIFICATIONS OF PATTERN CAM
OPTIONS
Model Part No. Description Feature
― ―
V059
S189A
S189B
RF-1
225-61559
D1501-583-H00 D1502-583-H00
SS-7091110-SP 225-26669
225-26560 235-23152 235-22550 235-23004
MAV-059000AA
MAS-189000AA
MAS-189000AB
―
Automatic reverse feed kit
Presser bar Presser
connecting rod Screw
Non-lubricated hook (plastic hook with special race surface)
Hard-point hook Hook Bobbin case asm. Bobbin
Tension-free feeder (tape feeder)
Elastic tape tensing device
Pedal-operated reverse feed stitching device
This device allows a machine without thread trimmer to perform automatic reverse feed function.
The aforementioned parts are used when a lockstitching type presser foot is installed on the machine.
The hook effectively prevents oil stains. When the hook is used, setscrews are required for the front of the hook-driving shaft (Part No.: 110-79506).
The blade point of this hook prevents abrasion. The hook with a non-rotational bobbin eliminates sewing troubles resulting
from bobbin idling. It provides a uniform bobbin thread tension at all times, thereby guaranteeing a consistent stitch formation.
The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation.
Applies tension to desired portions of the tape fed from tension-free tape puller. The device is started/stopped by operating the knee switch. This increases operator productivity without interrupting the sewing work.
The device enables the operator to perform reverse feed stitching using the pedal without using the right hand. (excluding the LZ-2285N)
Presser foot connecting components
Hook with non­rotational bobbin
For standard zigzag stitching and blind stitching, set the zigzag width to 5mm or less when the machine runs at a sewing speed of 4,200rpm or more.
Name
of pattern
Part No.
Part name
Max. zigzag
width (mm)
Max. pattern
width (mm)
Number
of stitches
Stitch
pattern
3-step zigzag
225-68950
Pattern cam
B
8.0
6
Standard
zigzag
225-68851
Pattern cam
A
6.0
2
2-step zigzag
225-69057
Pattern cam
C
8.0
4
Standard
scallop
225-69156
Pattern cam
D
8.0
2.4
24
Crescent
scallop
225-69255
Pattern cam
E
8.0
3.6
24
Equal-width
scallop
225-69354
Pattern cam
F
8.0
3.4
24
Equal-width
scallop
225-69453
Pattern cam
G
8.0
2.4
12
Blind
stitch
225-69552
Pattern cam
H
6.0
4
Blind
stitch
225-69651
Pattern cam
J
6.0
6
Blind
stitch
225-69750
Pattern cam
K
6.0
8
Blind stitch
225-69859
Pattern cam
L
6.0
12
www.egemakine.com.tr
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 5/6
LIST OF THE MAJOR GAUGES
Max. zigzag width/ Max. feed pitch
Throat plate Feed dog Presser foot (with finger guard) Remarks
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 2mm
Max. feed amount: 1.3mm
Max. feed amount: 5mm
Max. feed amount: 2.5mm
Max. feed amount: 1.6mm
With a recess on the reverse side of the presser foot
Light-in-weight type
Light-in-weight type
Light-in-weight type
Light-in-weight type
Presser foot with tape guide
Front fulcrum type
Light-in-weight type with the front fulcrum
Light-in-weight type with the front fulcrum
• Suited to sewing tasks that require frequent changes in the needle throw position.
• Light -in-weight presser foot prevents jumping at the time of high-speed sewing.
Max. 15.6
Max. 2
100-41010
100-47017
225-80104
225-80500
225-82209
225-82803
225-81508
225-48804
225-40009
225-45107
225-45610
100-41101
225-80005
225-82100
225-82704
225-82407
225-82506
225-45008
225-45511
225-45867
225-45362
MAB-109000B0
225-84965
225-80864
235-03204
235-03154
225-80765
225-80260
225-80369
4
www.egemakine.com.tr
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 6/6
• In addition to the above-listed ones, many different gauges and attachments for zigzag stitching are available. Please contact us for details.
Max. zigzag width/ Max. feed pitch
Throat plate Feed dog Presser foot (with finger guard) Remarks
Max. feed amount: 1.3mm
Max. feed amount: 2.5mm
Max. feed amount: 2.5mm
Max. feed amount: 5mm
Max. feed amount: 2.5mm
Max. feed amount: 5mm
Max. feed amount: 2.5mm
Max. feed amount: 5mm
• For standard zigzag stitching
• The 5mm-feed is suited to tape-attaching process where the elastic tape is sewn with stretched.
• For attaching tape to brassieres, etc.
Light-in-weight type
Light-in-weight type
Light-in-weight type
(finger guard: small)
Light-in-weight type
Light-in-weight type
Light-in-weight type with the front fulcrum
225-48705
225-48507
225-48010
225-49000
225-49208
225-46519
225-46212
MAD-04060000
225-49604
225-49703
MAD-04070000
225-46410
225-46717
225-49307
225-49109
225-48119
225-48408
225-48804
225-41601
225-41809
225-41700
225-46618
225-46311
225-48960
225-47962
225-48663
225-48671
225-46964
225-47269
MAD-040500A0
225-49869
www.egemakine.com.tr
LZ-2284C-7 (September, 2003) 1/1
The cylinder-bed more than adequately facilitates the handling of tubular sewing products in circular sewing processes, thereby contributing to increased productivity and upgraded seam quality. This zigzag stitching machine is best suited to the attaching or counter stitching of elastic tape. The machine demonstrates features of the LZ-2284N-7 that offer outstanding productivity and a higher facility operation ratio, which is supported by a maximum sewing speed of 5,000rpm and a one-touch utility changeover between standard and 3-step zigzag stitching patterns.
In elastic tape attaching or counter stitching processes for girdles, shorts or swimwear, the machine promises easy handling of the material. The material is placed over the cylinder-bed and can be sewn at once without stopping the sewing machine during sewing. This dramatically increases productivity.
SPECIFICATIONS
High-speed, Cylinder-bed, 1-needle, Lockstitch, Zigzag Stitching Machine with Automatic Thread Trimmer (with standard/3-step zigzag stitching pattern changeover function)

LZ-2284C-7

WHEN YOU PLACE ORDERS
LZ2284C7
LZ-2284C-7-WB/CP-160B
Auto-lifter Code
Not provided ZZ AK83 (pedal-driven) AK
Wiper and automatic reverse feed function
Wiper
Automatic reverse feed function
Code
Not provided Provided 0B Provided Provided WB
Model name LZ-2284C-7 Stitch system Standard/3-step zigzag
Stitch pattern
Max. sewing speed
5,000rpm
Standard zigzag stitching: zigzag width of 5mm or less 3-step zigzag: zigzag width set to 8mm or less
Max. zigzag width Standard zigzag: 8mm/3-step zigzag: 10mm Max. feeding amount Standard zigzag: 2.5mm/3-step zigzag: 2.0mm Lift of the presser foot By hand: 5.5mm/By knee: 10mm Hook DP hook (with titanium-treated inner hook) Thread take-up Rotary type Needle (at the time of delivery) SCHMETZ 134SUK, 438(#75)#65#90 ORGAN DP×5 #9#14 Needle position changing mechanism Provided as standard Reverse feed stitching mechanism Provided as standard Bobbin thread winder Built-in the machine head Needle throw pattern cam Grooved cam Peripheral dimension of the cylinder section
322mm
Lubrication Automatic Lubricating oil JUKI New Defrix Oil No.1 (equivalent to ISO VG7) Power requirement/ Power consumption Single-, 3-phase/650VA Total weight 86.5kg
Control box Code Standard S
SC910 S
M91S
PSC box Motor for SC Operation panel
Operation panel Code
IP-100B IP100B CP-160B CP160B
Pulley belt Code Standard S
PSC box Code
For JUS (LA)
Single-phase 100〜120V PFL S For JUS*, General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For CE Single-phase 200240V PFL N For China Single-phase 200240V PFL U
JUS: North America and Central and South America.
4
www.egemakine.com.tr
LZ-271, 391N, 586 (September, 2003) 1/2
LZ-271
This machine can be used for extra light-weight materials including
lawn and organdy, medium-weight materials including those used for blouses and handkerchieves, and heavy-weight materials on which names and labels are to be embroidered. Beautifully finished seams free from needle swaying or material breakage are assured every time.
The zigzag width is regulated up to 12mm using the knee lifter.
This knee lifter has been designed to fit the jut-type knee lifter widely used by zigzag stitch machines.
LZ-271
1-needle, Embroidering Sewing Machine
LZ-391N
When this machine is used as an embroidering machine, the
zigzag width is as large as 12mm and the sewing speed is as high as 1,700rpm. When used as a zigzag stitch machine, the zigzag width is as large as 10mm and the sewing speed is as high as 2,000rpm. Furthermore, the JUKI LZ-391N can be used as a straight stitching machine capable of running at a speed of 2,000rpm by simply setting the zigzag width to 0.
To change from embroidering to zigzag stitching or vice versa,
all you need to do is install the throat plate exclusive for either function, and install/remove the presser bar and feed dog. This procedure can be carried out very easily.
LZ-391N
1-needle, Lockstitch, Zigzag and Embroidering Sewing Machine
LZ-586
While the needle is piercing the cloth, the needle bar does not
throw. So, with this feature, tearing the sewing cloth and curving or breaking of the needle is prevented to produce beautifully sewn seams.
In order to facilitate smooth passing of the thread around the
bobbin case, a thread opener is equipped on these models. Thus, beautiful stitches without flaws can be produced constantly.
As the machines are equipped with completely automatic
lubrication system by which all essential parts are automatically lubricated by means of plunger pump, there is no worry of scorching of parts to ensure durability and also eliminates troublesome hand oiling.
Applications
Light-, medium-, heavy-weight materials: Attaching laces to undergarments, table cloth, etc. gathering of negligees, etc. Heavy weight materials: Attaching sweat bands to hats; closing stitches on heels; hemming of rubber corded materials; stitching of all leather goods
LZ-586
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
4
www.egemakine.com.tr
LZ-271, 391N, 586 (September, 2003) 2/2
SPECIFICATIONS
Model name LZ-271
Application Embroidering on light-, medium-, and heavy-weight materials Max. sewing speed
2,000rpm (with a zigzag width set to 10mm) 1,700rpm (with a zigzag width set to 12mm)
Thread take-up Link type Needle bar stroke 33.4mm Needle (at the time of delivery) DB×1 (#11) #9#18 Zigzag width 012mm Zigzag width regulating method Using the jut-type knee lifter with the zigzag width pointer released. Hook DB-type hook for embroidering Distance from needle to machine arm 270mm (from the needle entry bottom of the arm) Lubrication By an oiler Lubricating oil JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Model name LZ-391N
Application Embroidering and zigzag stitching light-, medium-,and heavy -weight materials Max. sewing speed
2,000rpm (with a zigzag width set to 10mm) 1,700rpm (with a zigzag width set to 12mm)
Thread take-up Link type Needle bar stroke 33.4mm Max. stitch length 5mm Stitch length adjustment method Moving the knob up/down Needle (at the time of delivery) DB×1 (#14) #9#16 Zigzag width 012mm
Zigzag width regulating method
Using the knee lifter with the zigzag width pointer released.
If you sew the product with the zigzag width fixed to a certain value, the pointer should be fixed to that value.
Hook DB-type hook for embroidering (capable of using a thick thread) Distance from needle to machine arm 270mm (from the needle entry bottom of the arm) Lubrication By an oiler Lubricating oil JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Model name LZ-586
Max. sewing speed 3,500rpm Thread take-up Link type Needle bar stroke 30.7mm Max. stitch length 4mm Stitch length adjustment method Dial system Lift of the presser foot By hand: 6mm, By knee: 10mm Reverse feed stitching Lever system Needle (at the time of delivery) DP×58 or DP×5 (#14) #11#18 Zigzag width 06mm Hook DB-type fully rotating hook Lubrication Automatic Lubricating oil JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Part No. Description Apprication
B3352-271-0A0 Compass (asm.) B1502-391-BA0 Presser bar joint rod B (asm.) LZ-271, LZ-391N B5001-271-0A0 Scallop (asm.)
ATTACHMENTS
www.egemakine.com.tr
MF-7722, MF-7723 (September, 2003) 1/2
Since the seam tension may be easily increased or decreased, the machine can be used for a broader range of applications. Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high­grade well-tensed seams for outer wear.
Optimization of the thread take-up mechanism and top covering thread path route. The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top coverstitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
The machine comes with a variety of features to increase applicable types of sewing products. The machine is provided as standard with a great diversity of features, such as a differential feed adjustment mechanism with a micro­adjustment mechanism, a feed dog inclination adjustment mechanism, a micro-lifter and a needle bar stroke conversion mechanism. The machine can therefore be quickly adjusted to respond to various materials and processes, thus increasing the applicable types of sewing products.
SPECIFICATIONS
Model name MF-7722 MF-7723 Stitch type 2-needle top and bottom coverstitch 3-needle top and bottom coverstitch Max. sewing speed 6,500rpm Stitch length 1.23.6mm (stitch length can be adjusted to 4.4 mm) Differential-feed ratio 1:0.71:2 Needle gauge 4.0mm 4.8, 5.6, 6.4mm Needle UY128GAS #9S#14S (standard #10S) Lift of the presser foot 5mm (with top & bottom coverstitch), 8mm (with bottom coverstitch) Stitch pitch adjustment By dial Differential feed adjustment By micro-adjustment mechanism Lubrication Automatic Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18) Feed dog inclination adjustment Provided as standard Micro-lifter Provided as standard Needle bar stroke converting function
Provided as standard
Silicon oil tank for needle tip and needle thread
Provided as standard
Cartridge oil filter Provided as standard Weight of the machine head 46kg
High-speed, Flat-bed, Top and Bottom Coverstitch Machine
MF-7722
(2-needle, top and bottom coverstitch machine)
MF-7723
(3-needle, top and bottom coverstitch machine)
WHEN YOU PLACE ORDERS
MF77 B
MF-7723U10B56
MF-7723U10B56 MF-7723C10B56
Stitch type Code
2-needle, Top and Bottom Coverstitch
22
3-needle, Top and Bottom Coverstitch
23
Application Code
For universal U10 For collarette C10
Tonque shape of throat plate
Code
B type (standard) B
Needle gauge Code
4.0mm 40
4.8mm 48
5.6mm 56
6.4mm 64
For model category (23) (3-needle), needle gauge category 40 cannot be selected. For application category "collarette (C10)," needle gauge category 48 cannot be selected.
The needle bar stroke has been factory-set to 31mm as standard. 33mm for thicker material also be available by simple adjustment. (max. sewing speed: 5,500rpm)
5
www.egemakine.com.tr
MF-7722, MF-7723 (September, 2003) 2/2
1 Stitch length can be adjusted to 4.4mm at the maximum. 2 5mm with top coverstitch, 8mm without top coverstitch.
SUBCLASS MACHINE LIST
Seams Model No. Number of
needles
Number of
threads
Needle gauge
(mm)
Stitch
length (mm)
Differential-
feed ratio
Presser lifting amount (mm)
Max. sewing
speed (rpm)
Subclass machines
MF-7723-U10-B48 3 5 4.8 1.23.6 1:0.71:2 5(8) 6.500 MF-7723-U10-B56 3 5 5.6 1.23.6 1:0.71:2 5(8) 6.500 MF-7723-U10-B64 3 5 6.4 1.23.6 1:0.71:2 5(8) 6.500 MF-7722-C10-B40 2 4 4.0 1.23.6 1:0.61:1.1 5(8) 6.500 MF-7722-C10-B56 3 5 5.6 1.23.6 1:0.61:1.1 5(8) 6.500 MF-7722-C10-B64 3 5 6.4 1.23.6 1:0.61:1.1 5(8) 6.500
U10
Basic stitch (universal type)
C10
Collarette attaching
U10 (universal type)
This basic model can be used in a broad range of processes including sleeve-/bottom-hemming for T-shirts and coverings for sportswear and knitwear.
This model is best suited for attaching collarettes on underwear, briefs and knitwear.
C10 (for collarette attaching)
Specifications changing between the U10 and C10 can easily be carried out by replacing gauge components.
Interchangeable parts Interchangeable parts
U10 C10 C10 U10
Gauge components
Parts name
Gauge component parts No.
4.0mm 5.6mm 6.4mm
Needle clamp 13350103 13350301 13350400 Presser foot asm. 13376157 13376256 13376256 Throat plate 13351408 13351606 13351705 Main feed dog 13353800 13353909 13353909 Differential-feed dog 13357702 13357801 13357801
Gauge components
Parts name
Gauge component parts No.
4.0mm 5.6mm 6.4mm
Needle clamp 13350202 13350301 13350400 Presser foot asm. 13376058 13375050 13375050 Throat plate 13354709 13354808 13351200 Main feed dog 13354204 13354204 13353701 Differential-feed dog 13358304 13358304 13357603 Looper 13339007 ― ―
Cover related parts Cover related parts
1 The coverseam related assembly parts number does not include
any attachment.
2 For the gauge size of 4.8 mm, the looper (13339007) is also required.
Cover related assembly parts number 40018349
1
2
Cover related assembly parts number 13303458
1 2
www.egemakine.com.tr
MF-7723/UT33 (August, 2004) 1/2
The quality-first flat-bed coverstitch machine now comes with a pneumatic top and bottom thread trimmer. I t offers dramatically improved thread trimming performance and reliability to achieve consistent thread trimming, thereby contributing to increased productivity.
SPECIFICATIONS
High-speed, Flat-bed, Top and Bottom Coverstitch Machine with Pneumatic Top and Bottom Thread Trimming Device

MF-7723/UT33

(3-needle, top and bottom coverstitch machine)
Model name Stitch type Needle Stitch pitch adjustment Differential feed adjustment Lubrication Lubricating oil Top and bottom thread trimmer Auto-lifter Micro-lifter Needle bar stroke converting function
Silicon oil tank for needle tip and needle thread
Cartridge oil filter Compressed air
Air consumption Weight of the machine head
MF-7723 / UT33
3-needle top and bottom coverstitch
UY128GAS #9S#14S (standard #10S)
By dial
By micro-adjustment mechanism
Automatic
JUKI Machine Oil 18 (equivalent to ISO VG18)
Provided as standard (pneumatic type) Provided as standard (pneumatic type)
Provided as standard Provided as standard
Provided as standard Provided as standard
0.5MPa (5kgf/G)
0.7NR/min, 182NR/min (when the air-blow type wiper is used)
49kg
MF-7723U10B56/UT33
Pneumatic top and bottom thread trimming mechanism
Pneumatic top and bottom thread trimming mechanism
Part No.134-42058
The needle bar stroke has been factory-set to 31mm as standard. 33mm for thicker material also be available by simple adjustment. (max. sewing speed: 5,500rpm)
By using an air-blow nozzle included in the accessary box needle threads are blown at the end of bottom coverstitch.
SUBCLASS MACHINE LIST
1 Stitch length can be adjusted to 4.4mm at the maximum. 2 5mm with top coverstitch, 8mm without top coverstitch.
Seams Model No. Number of
needles
Number of
threads
Needle gauge
(mm)
Stitch
length (mm)
Differential-
feed ratio
Presser lifting amount (mm)
Max. sewing
speed (rpm)
Device
Subclass machines
MF-7723-U10-B56 3 5 5.6 1.23.6 1:0.71:2 5(8) 6,500 UT33
U10
Basic stitch (universal type)
1 2
5
www.egemakine.com.tr
MF-7723/UT33 (August, 2004) 2/2
WHEN YOU PLACE ORDERS
MF77 23 U10 B UT33
SC500 F
PSC box PSC box
M50KQ41
Motor for SC
M51
Motor for SC
SC-510/M51
PSC box Code
For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
Stitch type Code
3-needle, top and bottom coverstitch
23
Control box Code
MF-7700/UT33 F
Power supply Code
Single-phase 200240V K
Pulley belt
Code
Applicable Motor pulley
Belt length
model O.D.(mm) (inch)
MF-7700/UT33 110 41 Q41
Application Code For universal U10
Tonque shape of throat plate
Code
B type (standard) B
Needle gauge Code
5.6mm 56
6.4mm 64
Select the needle gauge by
referring to the Subclass Table.
Be sure to use the belt supplied with the machine head.
JUS: North America and Central and South America.
Device and attachment Code
Pneumatic top and bottom thread trimming device
UT33
SC510 S
Control box Code
Standard S
PSC box Code
For JUS
(LA) Single-phase 100〜120V PFL S For JUS*,General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
Excluding North America and Central and South America. Select SC-510/M51 for the machines destined for the North America and
South and Central America.
www.egemakine.com.tr
MF-7722E10B40/MD10, MF-7723E10B□□/MD10 (September, 2004) 1/2
Designed for the sewing of elastic tapes in shorts and underwear. The right-hand fabric trimmer cuts he multi-layered joining section with outstanding consistency. Beautifully finished products are achieved with the seams and material edges aligned.
Right hand fabric trimmer mechanism Easy installation/removal of the right-hand fabric trimmer facilitates adjustment of the looper.
Mechanical type metering device: MD10
The metering device supplies a consistent length of tape in synchronization with the feed. (Tape lengths of 0.9 to 3.5mm per stitch.) Elastic tapes of up to 80mm in width can be used. The tape width can be easily adjusted. For laces width of which is 15 to 80mm, change the currently-mounted guide with a wider-tape guide which is supplied with the unit as an accessory. The drive roller/driven roller can be held in open to facilitate tape placement.
SPECIFICATIONS
Model name
Stitch type
Max. sewing speed Stitch length Differential-feed ratio (switchable) Needle gauge Needle Lift of the presser foot Knife stroke Stitch pitch adjustment Differential feed adjustment Lubrication Lubricating oil Micro-lifter Needle bar stroke converting
function
Silicon oil tank for needle tip and needle thread
Cartridge oil filter Metering device Weight of the machine head
MF-7723E10B56/MD10
The needle bar stroke has been factory-set to 31mm as standard. 33mm for thicker material also be available by simple adjustment.
High-speed, Flat-bed, Top and Bottom Coverstitch Machine For elastic tape attaching (with right hand fabric trimmer)
MF-7722E10B40/MD10
(2-needle, top and bottom coverstitch machine with mechanical type metering device)
MF-7723E10B□□/MD10
(3-needle, top and bottom coverstitch machine with mechanical type metering device)
MF-7722E10B40
2-needle top and bottom
coverstitch
MF-7723E10B□□
3-needle top and bottom
coverstitch
MF-7722E10B40/MD10
2-needle top and bottom
coverstitch
MF-7723E10B□□/MD10
3-needle top and bottom
coverstitch
5,500rpm 5,000rpm
1.23.6mm (stitch length can be adjusted to 4.4mm) 1: 0.7〜1:1
4.0mm 5.6, 6.4mm 4.0mm 5.6, 6.4mm UY128GAS #9S#14S (standard #10S)
3mm (with top and bottom coverstitch), 6mm (with bottom coverstitch)
5mm
By dial
By micro-adjustment mechanism
Automatic
JUKI Machine Oil 18 (equivalent to ISO VG18)
Provided as standard Provided as standard
Provided as standard Provided as standard
 Mechanical t ype metering device: MD10
Provided as standard
46.5kg 49kg
5
www.egemakine.com.tr
MF-7722E10B40/MD10, MF-7723E10B□□/MD10 (September, 2004) 2/2
WHEN YOU PLACE ORDERS
SUBCLASS MACHINE LIST
LIST OF E10 GAUGES AND KNIVES
1 Stitch length can be adjusted to 4.4mm at the maximum. 2 3mm with top coverstitch, 6mm without top coverstitch.
Seams Model No. Number of
needles
Number of
threads
Needle gauge
(mm)
Stitch
length (mm)
Differential-
feed ratio
Presser lifting
amount (mm)
Max. sewing speed (rpm)
Device
Subclass machines
MF-7722-E10-B40 2 4 4.0 1.23.6 1:0.71:1 3 (6) 5,500
MD10, TC13
MF-7723-E10-B56 3 5 5.6 1.23.6 1:0.71:1 3 (6) 5,500
MD10, TC13
MF-7723-E10-B64 3 5 6.4 1.23.6 1:0.71:1 3 (6) 5,500
MD10, TC13
E10
For attaching elastic
1 2
Stitch type Code
2-needle, top and bottom coverstitch
22
3-needle, top and bottom coverstitch
23
Application Code
For attaching elastic
E10
Tonque shape of throat plate
Code
B type (standard) B
Needle gauge Code
4.0mm 40
5.6mm 56
6.4mm 64
For model category (23) (3-needle), needle gauge category 40 cannot be selected.
1 Specify the MD10 when placing your order.2 The TC13 can be retrofitted to the machine.
Device and attachment Code
Not provided Mechanical type
metering device
MD10
Electromagnetic type tape cutter
TC13
MF77 E10B / /
1
2
Model name MF-7722E10B40 MF-7723E10B56 MF-7723E10B64
Needle gauge 4.0mm 5.6mm 6.4mm Needle clamp 13350103 13350301 13350400 Throat plate 13356001 13356209 13356308 Presser foot asm. 40018288 40018289 Main feed dog 13354006 13354105 Differential-feed dog 13358106 13358205 Moving knife 40016780 Lower knife 13150701
www.egemakine.com.tr
MF-7822, MF-7823 (August, 2004) 1/2
The machine produces seams, which match materials and thread with consistency. Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high­grade well-tensed seams for outer wear.
Optimization of the thread take-up mechanism and top covering thread path route. The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top coverstitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
Simple maintenance mechanism. The machine is provided with a variety of mechanisms, which have been developed in consideration of production sites. The mechanisms can be easily maintained, contributing to increased production efficiency.
SPECIFICATIONS
Model name Stitch type Max. sewing speed Stitch length Differential-feed ratio(switchable) Needle gauge Needle Lift of the presser foot Stitch pitch adjustment Differential feed adjustment Lubrication Lubricating oil Micro-lifter Needle bar stroke converting function
Silicon oil tank for needle tip and needle thread Cartridge oil filter Weight of the machine head
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine
MF-7822
(2-needle, top and bottom coverstitch machine)
MF-7823
(3-needle, top and bottom coverstitch machine)
WHEN YOU PLACE ORDERS
MF78 B
MF-7823U10B56
MF-7823U10B56 MF-7823K10B56
Stitch type Code
2-needle, Top and Bottom Covestitch
22
3-needle, Top and Bottom Coverstitch
23
Application Code
For universal U10 For collarette C10
Tonque shape of throat plate
Code
B type (standard) B
Needle gauge Code
4.8mm 48
5.6mm 56
6.4mm 64
For model category (23) (3-needle), needle gauge category 48 cannot be selected.
The needle bar stroke has been factory-set to 31mm as standard. 33mm for thicker material also be available by simple adjustment. (max. sewing speed: 5,500rpm)
MF-7822 MF-7823
2-needle top and bottom coverstitch 3-needle top and bottom coverstitch
6,500rpm
0.93.6mm (stitch length can be adjusted to 4.5mm) 1: 0.91:1.8 (1: 0.6〜1:1.1)
4.8mm 5.6, 6.4mm UY128GAS #9S#14S (standard #10S)
5mm (with top and bottom coverstitch),
8mm (with bottom coverstitch)
By dial
By micro-adjustment mechanism
Automatic
JUKI Machine Oil 18 (equivalent to ISO VG18)
Provided as standard Provided as standard Provided as standard Provided as standard
42kg
5
www.egemakine.com.tr
MF-7822, MF-7823 (August, 2004) 2/2
SUBCLASS MACHINE LIST
LIST OF GAUGES
Seams Model No. Number of
needles
Number of
threads
Needle gauge
(mm)
Stitch
length (mm)
Differential-
feed ratio
Presser lifting amount (mm)
Max. sewing
speed (rpm)
Subclass machines
MF-7822-U10-B48 2 4 4.8 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500
MF-7823-U10-B56 3 5 5.6 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500
MF-7823-U10-B64 3 5 6.4 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500
MF-7823-K10-B56 3 5 5.6 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500
U10
Basic stitch (universal type)
K10
Covering
U10 (universal type)
This basic model can be used in a broad range of processes including sleeve-/bottom-hemming for T-shirts and coverings for sportswear and knitwear.
This model is best suited to the covering process for polo shirts, trainers, sportswear, knit outers, etc.
K10 (covering)
1 32
1 Stitch length can be adjusted to 4.5mm at the maximum. *2 Differential ratio can be switched by adjustment. 3 5mm with top coverstitch, 8mm without top coverstitch.
Covering guard (R) Part No.: 13438007 Covering guard (L) Part No.: 13438106
Seams Model name Needle clamp Presser foot asm. Throat plate Main feed dog Differential-feed dog
MF-7822-U10-B48 13350509 13376058 13354709 13431200 13433503 MF-7823-U10-B56 13350301 13375050 13354808 13431200 13433503 MF-7823-U10-B64 13350400 13375050 13351200 13430103 13432109 MF-7823-K10-B56 13350301 13375050 13352307 13430707 13432901
www.egemakine.com.tr
MF-7822/UT25, MF-7823/UT25 (August, 2004) 1/2
The quality-first cylinder-bed coverstitch machine now comes with a pneumatic thread trimmer. It offers dramatically improved thread trimming performance and reliability to achieve consistent thread trimming, thereby contributing to increased productivity.
SPECIFICATIONS
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine with Pneumatic Top and Bottom Thread Trimming Device
MF-7822/UT25
(2-needle, top and bottom coverstitch machine)
MF-7823/UT25
(3-needle, top and bottom coverstitch machine)
Model name Stitch type Needle
Stitch pitch adjustment Differential feed adjustment Lubrication Lubricating oil Top and bottom thread trimmer Auto-lifter Micro-lifter Needle bar stroke converting function
Silicon oil tank for needle tip and needle thread
Cartridge oil filter Weight of the machine head
MF-7822/UT25 MF-7823/UT25
2-needle top and bottom 3-needle top and bottom
coverstitch coverstitch
UY128GAS #9S#14S (standard #10S)
By dial
By micro-adjustment mechanism
Automatic
JUKI Machine Oil 18 (equivalent to ISO VG18)
Provided as standard (pneumatic type) Provided as standard (pneumatic type)
Provided as standard Provided as standard
Provided as standard Provided as standard
44kg
MF-7823U10B56/UT25
Pneumatic top and bottom thread trimming mechanism
Pneumatic top and bottom thread trimming mechanism
Part No.134-42058
The needle bar stroke has been factory-set to 31mm as standard. 33mm for thicker material also be available by simple adjustment. (max. sewing speed: 5,500rpm)
By using an air-blow nozzle included in the accessary box needle threads are blown at the end of bottom coverstitch.
Seams Model No. Number of
needles
Number of
threads
Needle gauge
(mm)
Stitch
length (mm)
Differential-
feed ratio
Presser lifting amount (mm)
Max. sewing speed (rpm)
Device
Subclass machines
1 3*2
SUBCLASS MACHINE LIST
MF-7822-U10-B48 2 4 4.8 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500 UT25
MF-7823-U10-B56 3 5 5.6 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500 UT25
MF-7823-U10-B64 3 5 6.4 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500 UT25
MF-7823-K10-B56 3 5 5.6 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 6,500 UT25
U10
Basic stitch (universal type)
K10
Covering
1 Stitch length can be adjusted to 4.5mm at the maximum. *2 Differential ratio can be switched by adjustment. 3 5mm with top coverstitch, 8mm without top coverstitch.
5
www.egemakine.com.tr
MF-7822/UT25, MF-7823/UT25 (August, 2004) 2/2
WHEN YOU PLACE ORDERS
SC500 F
PSC box PSC box
M50KQ41
Motor for SC
M51
Motor for SC
SC-510/M51
PSC box Code
For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
Stitch type Code
2-needle, top and bottom coverstitch
22
3-needle, top and bottom coverstitch
23
Control box Code
MF-7700/UT33 F
Power supply Code
Single-phase 200240V K
Pulley belt
Code
Applicable Motor pulley
Belt length
model O.D.(mm) (inch)
MF-7800/UT25 110 41 Q41
Application Code
For universal U10 For covering K10
Tonque shape of throat plate
Code
B type (standard) B
Needle gauge Code
4.8mm 48
5.6mm 56
6.4mm 64
Select the needle gauge by referring to the Subclass Table.
Be sure to use the belt supplied with the machine head.
JUS: North America and Central and South America.
Device and attachment Code
Pneumatic top and bottom thread trimming device
UT25
SC510 S
Control box Code
Standard S
PSC box Code
For JUS
(LA) Single-phase 100〜120V PFL S For JUS*,General Export 3-phase 200240V PFL D For General Export Single-phase 200240V PFL K For EU (CE) Single-phase 200240V PFL N For China Single-phase 200240V PFL U
Excluding North America and Central and South America. Select SC-510/M51 for the machines destined for the North America and
South and Central America.
MF78 B UT25
www.egemakine.com.tr
MF-7823H20B□□, MF-7823H20B□□/UT25 (August, 2004) 1/2
SPECIFICATIONS
COMPRESSED AIR/AIR CONSUMPTION (MF-7823H20B□□/UT25)
MF-7823H20B56/UT25
This model is intended for the hemmimg of knit shirts and T-shirts. The left-hand fabric trimmer promises upgraded-quality finished trimming.
Left hand fabric trimmer mechanism
•The upper knife stroke can easily be adjusted according to the
material thickness.
•The whole knife driving mechanism unit can be removed.
The machine, therefore, can be used for standard hemming without the knife.
•Commercially available lower knife can be used with no additional
work.
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine for Hemming (with left hand fabric trimmer)
MF-7823H20B□□
(3-needle, top and bottom coverstitch machine)
MF-7823H20B□□/UT25
(3-needle, top and bottom coverstitch machine with pneumatic top and bottom thread trimming device)
Model name Stitch type Max. sewing speed Stitch length Differential-feed ratio Needle gauge Needle
Lift of the presser foot Upper knife stroke
Stitch pitch adjustment Differential feed adjustment Lubrication Lubricating oil Micro-lifter Needle bar stroke converting function Silicon oil tank for needle tip and needle thread Cartridge oil filter Top and bottom thread trimmer Auto-lifter Weight of the machine head
MF-7823H20B□□ MF-7823H20B□□/UT25
3-needle top and bottom coverstitch
5,500rpm
0.93.6mm (stitch length can be adjusted to 4.5mm) 1:0.91:1.8 (1:0.61:1.1)
5.6, 6.4mm
UY128GAS #9S#14S (standard #10S)
5mm (with top and bottom coverstitch), 8mm (with bottom coverstitch)
35mm (standard 4mm)
By dial
By micro-adjustment mechanism
Automatic
JUKI Machine Oil 18 (equivalent to ISO VG18)
Provided as standard Provided as standard Provided as standard Provided as standard
− Provided as standard (pneumatic type) − Provided as standard (pneumatic type)
42kg 44kg
Device
Compressed air Air consumption
UT25 Air-blow type wiper MC35
0.7NR/min
0.5MPa
182NR/min ○○
(5kgf/F)
456NR/min ○○ 637NR/min ○○○
The needle bar stroke has been factory-set to 31mm as standard. 33mm for thicker material also be available by simple adjustment. (max. sewing speed: 5,500rpm)
5
www.egemakine.com.tr
MF-7823H20B□□, MF-7823H20B□□/UT25 (August, 2004) 2/2
WHEN YOU PLACE ORDERS
MF7823H20B /
MF7823H20B /UT25/
[Without automatic thread trimmer]
SUBCLASS MACHINE LIST
LIST OF H20 GAUGES AND KNIVES
Seams Model No. Number of
needles
Number of
threads
Needle gauge
(mm)
Stitch
length (mm)
Differential-
feed ratio
Presser lifting amount (mm)
Max. sewing speed (rpm)
Device
Subclass machines
1 3*2
MF-7823-H20-B56 3 5 5.6 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 5,500
MF-7823-H20-B64 3 5 6.4 0.93.6
1:0.91:1.8
(1:0.61:1.1)
5(8) 5,500
H20
Hemming
1 Stitch length can be adjusted to 4.5mm at the maximum. *2 Differential ratio can be switched by adjustment. 3 5mm with top coverstitch, 8mm without top coverstitch.
Stitch type Code
3-needle, top and bottom coverstitch
23
Application Code
For hemming H20
Tonque shape of
throat plate
Code
B type (standard) B
Needle gauge Code
5.6mm 56
6.4mm 64
Thread trimming device Code
Pneumatic top and bottom thread trimming device
UT25
Device and attachment Code
Not provided Pneumatic waste removal device
(solenoid valve type)
MC35
Device and attachment Code
Not provided Pneumatic waste removal device
(mechanical valve type)
MC36
[With automatic thread trimmer]
*
For the control box/motor, select SC-500/M50 or SC-510/M51. Select SC-510/M51 for the machines destined for the North America and South and Central America.
UT25 MC35, MC36
UT25 MC35, MC36
Model name Needle gauge Needle clamp Throat plate Presser foot asm. Main feed dog Differential-feed dog Upper knife Lower knife
MF-7823H20B56 MF-7823H20B64
5.6mm 6.4mm 13350301 13350400 13445200 13445309
13467758 13431101 13433404 13461801 13460803
www.egemakine.com.tr
MFB-2600 (September, 2003) 1/1
2
1

MFB-2600

SPECIFICATIONS
Application
A (light-weight
materials)
B (medium-weight
materials)
H (heavy-weight
materials)
F 4.8mm G 5.6mm H 6.4mm
F 4.8mm G 5.6mm H 6.4mm G 5.6mm H 6.4mm
NEEDLE GAUGE: FINISHED WIDTH
WHEN YOU PLACE ORDERS
MFB2600
The sewig speed is very fast, the normal rotational speed of the machine is as high as 5,000rpm. This leads to highly efficient belt-loop making.
The side cutter is equipped with a newly developed mechanism to drive the knife using the timing belt from the pulley side. This reduces the vibration of the machine during a high-speed operation, thereby leading to a consistent performance.
The newly developed binder unique to JUKI is longer than conventional binders. It is therefore capable of rolling up the material smoothly, making beautifully and uniformly finished belt-loops without any twisted or irregularly rolled section.
MFB-2600
High-speed, 2-needle, 3-thread, Bottom Coverstitch, Belt-loop Making Machine
Model name Stitch type Max. sewing speed Stitch length Needle bar stroke Feed adjustment method Needle gauge Finished width Differential-feed ratio Needle (at the time of delivery) Lubrication Lubricating oil
MFB-2600
2-needle, 3-thread, bottom coverstitch
5,500rpm (normal 5,000rpm)
1.23.2mm
30.4mm
By adjusting the amount of eccentricity
4.8, 5.6, 6.4mm 820mm
1:0.51:3.2
DV×1 (#11) #11〜#14 or UY128GAS (#75) #75〜#90
Automatic
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Needle gauge
4.8mm
5.6mm
6.4mm
8.0mm
Code
F G H
K
Code
A B H
Code
H
J
K
L M N P
Code
Q R
S T U V
Application
For light-wight materials For medinum-weight materials For heavy-weight materials
Finished
width (mm)
8
9 10 11 12 13 14
Finished
width (mm)
15 16 17 18 19 20
HJKLMNPQRSTUV
8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm
○ ○ ○○○  ○ ○ ○○○  ○ ○ ○○○  ○ ○ ○○○○○  ○ ○ ○○○○○○○○○  ○ ○ ○○○○○○○○○   ○ ○ ○ ○ ○ ○ ○ ○ ○  ○ ○ ○ ○ ○ ○ ○ ○ ○
Finished width
Needle gauge
1 : Needle gauge 2 : Finished width
5
www.egemakine.com.tr
MH-380, 382 (September, 2003) 1/3
Code
mm inch
B
3.2 1/8
C
4.0
5/32
D
4.8
3/16
E
5.6
7/32
F
6.4
1/4
G
7.1
9/32
H
7.9
5/16
K
9.5
3/8
L
12.7 1/2
N
19.1 3/4
Needle
gauge
WHEN YOU PLACE ORDERS
APPLICATIONS
MH-380
Model name
Max. sewing speed Stitch length Lift of the presser foot Needle bar stroke Needle (at the time of delivery) Thread take-up Stitch length adjustment Condensation stitches Looper system Looper stroke Elliptical motion Lubrication Lubricating oil Needle cooler
SPECIFICATIONS
MH380 U MH382U
MH-380
Parallel 2-needle
MH-382
Tandem 2-needle
6,000rpm
4mm
By hand: 5.5mm, By knee: 10mm
30mm
TV×7 (#14) #9〜#21
Needle bar thread take-up
By stitch dial (lockstitch)
By lever for condensation stitching
Rocking type looper
22.6mm
2.43.7mm Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Optional
Model
MH-380 (parallel 2-needle)
MH-382 (tandem 2-needle)
Application
• Sewing sides of slacks
• Hemming or welting garment parts
• Attaching lining tape
• Joining seat of slacks
It comes with JUKI’s unique inclined crank type looper mechanism. This gives the machine outstanding durability. You can use the sewing machine for a long time without ever worrying about looper failure.
You can easily set the machine to per form condensation stitching by operating the lever. Condensation stitches that prevent the thread from fraying can be consistently sewn.
Attachments (optional) have been prepared for many different applications, including sewing sides of jeans, slacks and skirts, hemming pockets, making decorative stitches on tape for sportswear.
MH-380
(parallel 2-needle)
MH-382
(tandem 2-needle)
High-speed, Flat-bed, 2-needle Double Chainstitch Machine
6
www.egemakine.com.tr
MH-380, 382 (September, 2003) 2/3
B
A
A
B
A B
A
B
A
B
A
B
34mm
50~60mm
Chain-off thread cutter
AT-8
Down turn hemmer
L050
Decorative tape attaching foot
Decorative tape attaching foot
B050
A: Needle gauge B: Finished width
A: Needle gauge B: Finished width
B051
Tape cutter SPECIFICATIONS WHEN YOU PLACE ORDERS
AT28
A: Needle gauge B: Finished width
Lap seam folder (Reverse)
M052
A: Needle gauge B: Finished width
Left feed top stitch folder
M054
A: Needle gauge B: Finished width
Right feed top stitch folder
Superpose joining guide
Zipper guide
M055
A: Needle gauge B: Finished width
Edge allowance: Max. 20mm
Applicable machines: MH-380, MH-382 Class of work: Jeans, Working wear Applications: Cut a chaining thread bridging two
workpieces continuously sewn by chainstitch in the way that a knife blade of the cutter is dropped. Best suited for continuous sewing on pocket openings of jeans or working wear.
Applicable machines: MH-380 Class of work: Jeans, Working pants Applications: Hem jeans hip pocket mouth, especially
suit for sections where high quality straight stitch is required.
Applicable machines: MH-380 Class of work: Sportswear, Training wear, Swimsuits,
Uniforms, Boxer pants, Rompers
Applications: Stitch accent line attach tapes Materials: Cotton bias tape, or plain woven tape for
some limited process.
Applicable machines: MH-380 Class of work: Ladies’ wear, Children’ wear, Sportswear,
Uniforms Applications: Attach decorative tapes and reinforcement
tapes Materials: Tape: Synthetic suede cloth tape, decorative
tape, plain woven tape. Contact us for special type of tapes.
Finished width (mm)
17 15 12 10
8 6
Needle gauge
mm (in)
12.7 (1/2)
9.5 (3/8)
7.9 (5/16)
6.4 (1/4)
4.8 (3/16)
4.0 (5/32)
Tape width
(mm)
34 30 24 20 16 14
Part No.
MAB-0500SLA0 MAB-0500QKA0 MAB-0500MHA0 MAB-0500KFA0 MAB-0500HDA0 MAB-0500GCA0
Applicable machines: MH-380 Class of work: Jeans, Working pants, Pants, Overalls Applications: Sew side seams Materials: Medium heavy-weight materials and heavy-
weight materials such as denim, drill, etc.
Applicable machines: MH-380 Class of work: Jeans, Working pants, Jackets, Skirts Applications: Sew side seams.
Attach flat faces of garments.
Applicable machines: MH-380 Class of work: Jeans, Working pants, Jackets, Skirts Applications: Sew side seams.
Attach flat faces of garments.
Applicable machines: MH-380 Class of work: Jeans, Working pants Applications: Sew zippers on left files Materials: Medium-weight materials such as jeans denim,
cotton gabardine, drill etc.
Applicable machines: MH-382 Applications: Used with lockstitch machines or chainstitch
machines to sew side seam, and similar runstitch & joining edge of garments with different curve lines
DEVICES AND ATTACHMENTS
Applicable model : MH-380 (Cannot be use with the thread
trimmer type.)
Operating method :Air drive by air switch Applications :Cutting various tapes related to attaching
reinforcement tape and decorative tape
Cut specifications :Knife width 20mm
Cutting range of the knife 16mm or less
Air pressure : 0.15~0.5 MPa
(1.5~5.0kgf/cm
2
)
Code
A B
Code
B C D
E
F H K
L
Switch
Finger switch Knee switch
AT28
Needle gauge mm (in)
3.2 (1/8")
4.0 (5/32")
4.8 (3/16")
5.6 (7/32")
6.4 (1/4")
7.9 (5/16")
9.5 (3/8")
12.7 (1/2")
Needle gauges, 1/8,
5/32, 3/16, 3/8 and 1/2, should be specially orderd.
Finished width (mm)
14 12 11 10
Guide width mm (in)
Tandem 2-needle
4.0 (5/32)
4.8 (3/16)
6.4 (1/4)
7.9 (5/16)
Part No.
GAT-080000AC GAT-08000CAC GAT-08000DAC GAT-08000FAC GAT-08000HAC
Part No.
MAL-0500P0A0 MAL-0500M0A0 MAL-0500L0A0 MAL-0500K0A0
Type
Light-weight material Medium-weight material Heavy-weight material Spacer (assy.)
Part No.
MAH-027000AA MAH-027000AB MAH-027000AH MAH-025020A0
Finished width
(mm)
17 14 12 10 10
9
Finished width
(mm)
17 14 12 10 10
9 8
Part No.
MAM-0520S0A0 MAM-0520P0A0 MAM-0520M0A0 MAM-0520K0A0 MAM-0520K0A0 MAM-0520J0A0
Needle gauge
mm (in)
12.7 (1/2)
9.5 (3/8)
7.9 (5/16)
6.4 (1/4)
5.6 (7/32)
4.8 (3/16)
Needle gauge
mm (in)
12.7 (1/2)
9.5 (3/8)
7.9 (5/16)
6.4 (1/4)
5.6 (7/32)
4.8 (3/16)
4.0 (5/32)
Part No.
MAM-0540S0A0 MAM-0540P0A0 MAM-0540M0A0 MAM-0540K0A0 MAM-0540K0A0 MAM-0540J0A0 MAM-0540H0A0
Finished width
(mm)
17 14 12 10 10
9 8
Needle gauge
mm (in)
12.7 (1/2)
9.5 (3/8)
7.9 (5/16)
6.4 (1/4)
5.6 (7/32)
4.8 (3/16)
4.0 (5/32)
Part No.
MAM-0550S0A0 MAM-0550P0A0 MAM-0550M0A0 MAM-0550K0A0 MAM-0550K0A0 MAM-0550J0A0 MAM-0550H0A0
Finished width
(mm)
17 15 12 10
9 8
Needle gauge
mm (in)
12.7 (1/2)
9.5 (3/8)
7.9 (5/16)
6.4 (1/4)
5.6 (7/32)
4.8 (3/16)
Part No.
MAB-0510SLA0 MAB-0510QKA0 MAB-0510MHA0 MAB-0510KFA0 MAB-0510JEA0 MAB-0510HDA0
Part No.
MAQ-020000A0
www.egemakine.com.tr
MH-380, 382 (September, 2003) 3/3
TABLE OF EXCHANGING GAUGE SETS
MH-380
Description
Gauge components
Description
Gauge components
Throat plate
Right looper
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.9mm (5/16")
9.5mm (3/8")
12.7mm (1/2")
3.2mm (1/8")
4.0mm (5/32")
4.8mm (3/16")
5.6mm (7/32")
6.4mm (1/4")
7.9mm (5/16")
9.5mm (3/8")
12.7mm (1/2")
3.2mm (1/8") = B
4.0mm (5/32") = C
4.8mm (3/16") = D
5.6mm (7/32") = E
6.4mm (1/4") = F
7.9mm (5/16") = H
9.5mm (3/8") = K
12.7mm (1/2" ) = L
B1103-380-B00 B1103-380-C00 B1103-380-D00 B1103-380-E00 B1103-380-F00 B1103-380-H00 B1103-380-K00 B1103-380-L00
B2030-380-000
Left looper Bed slide asm.
B2031-380-000 B1104-380-AA0
B1104-380-LA0
Bed slide asm.
Folder
B1108-380-BA0
B1108-380-HA0
B1108-380-LA0
B9126-038-BAA B9126-038-CAA B9126-038-DAA B9126-038-EAA B9126-038-FAA B9126-038-HAA
― ―
B9126-038-BAB B9126-038-CAB B9126-038-DAB B9126-038-EAB B9126-038-FAB B9126-038-HAB
― ―
B9126-038-BAC B9126-038-CAC B9126-038-DAC B9126-038-EAC B9126-038-FAC B9126-038-HAC
― ―
MH-382
MH-380
MH-382
1) Size code
M (for light weight materials) = A MH (for medium heavy weight materials) = B H (for heavy weight materials) = C
2) Folder code
B1103-382-000―
Needle clamp asm.
B1406-019-BA0 B1406-019-CA0 B1406-019-DA0 B1406-019-EA0 B1406-019-FA0 B1406-038-HA0 B1406-038-KA0 B1406-038-LA0
Presser foot asm.
(with finger guard)
Feed dog
B1509-038-BB0 B1509-038-CB0 B1509-038-DB0 B1509-038-EB0 B1509-038-FB0 B1509-038-HB0 B1509-038-KB0 B1509-038-LBB
B1613-380-B00
B1613-380-D00
B1613-380-F00
B1613-380-H00 B1613-380-K00 B1613-380-L00
Rear moving
needle guard
B2311-380-B00
B2311-380-E00
B2311-380-H00
B2311-380-L00
Right fix
needle guard
B2315-380-000
Left needle guard
B2312-380-000
B1406-038-BA0 B1524-382-0B0 B1613-382-000 B2311-382-000 B2312-382-000
MMHH
B2030-380-000 B2031-380-000 B1104-380-A00 B1108-380-B00 ― ― ――
6
www.egemakine.com.tr
MH-481, 481-5(4), 484, 484-5(4), 486-5(4) (September, 2003) 1/2
MH-481-5
The machine comes with a thread spreading mechanism
and an adjustable needle guard to prevent stitch skipping. The thread clamp mechanism, tension release mechanism and needle thread draw-out mechanism enable the machine to leave thread of a uniform length after thread trimming, and prevent slip-off of the needle thread. All of these mechanisms contribute to upgraded sewing.
Safety stitching (condensation stitching) the perfect
method of preventing loose stitches, or reverse feed stitching (back-tacking) can be alternated through the simple adjustment of the stopper of the reverse feed lever. Either sewing method can be used.
MH-481 MH-481-5(4)
(with automatic thread trimmer)
1-needle, Double Chainstitch Machine
The differential-feed is the best-suited feeding device
when sewing elastic materials including double-jersey or light-weight materials such as satin or georgette. Beautiful, elastic seams are created, while puckering, thread breakage and thread fraying are all prevented.
The sewing method can be alternated between stretch
stitching and shirr stitching with the simple operation of a lever. This lever is also used to adjust the differential­feed ratio.
MH-484 MH-484-5(4)
(with automatic thread trimmer)
1-needle, Double Chainstitch Differential-feed Machine
The machine comes with many different functions to prevent
uneven material feed and puckering for higher-quality seams. The machine is adaptable to a wider variety of light-to heavy­weight materials and takes full advantage of top-feed mechanism. This enables unskilled operators to finish seams of consistent quality.
The machine comes with a forced lifting mechanism for the
top-feed dog. This enables the operator to place the material to be sewn on the top-feed dog more smoothly. The machine incorporates its exclusive chain-off thread presser pedal foot, which improves seam quality and ease of operation.
MH-486-5(4)
1-needle, Double Chainstitch, Bottom and Variable Top-feed Machine with Automatic Thread Trimmer
Model name Feed system Max. sewing speed
Stitch length Top-feed amount
Differential-feed ratio
Lift of the presser foot Needle bar stroke Needle (at the time of the delivery) Stitch length adjustment Safety stitch Looper system Looper stroke Looper stroke of the front and rear Speed control Lubrication Lubricating oil Power consumption
MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4)
Bottom-feed Differential-feed Bottom and variable top-feed
5,500rpm 4,500rpm
14mm
Main feed: 14mm
15mm
Differential-feed: 1〜5.6mm
   07mm  
Max. gathering stitching 1: 3
 (standard 1: 1.5)
Max. stretch stitching 1: 0.5
By hand: 5mm, By knee: 10mm By hand: 5mm, By knee: 7mm
30mm 33mm
TV×7 (#11) #9〜#18 TV×7 (#11) #9〜#21
By dial
Condensation stitch/reverse stitching (by feed lever)
Inclined crank
21.5mm
2.13.3mm 3.2mm
 (1)  (1) (1)
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
 (2)  (2) (2)
(1) From 500rpm to the Max. sewing speed determined by the pulley used (externally adjustable)(2) Single-phase,3-phase (400W)
SPECIFICATIONS
Men's shirts Attaching yokes on the back Slacks, pantaloons, ski pants Attaching waist belts, joining sides, seam insides, or hip seams. Coats, blazers Sewing the center of the back, joining sides, sewing sleeves, belts, collars, and sewing the facing on to the front. Skirts Sewing the center and joining sides One-piece suits, blouses, negligees Mak ing pleats or gathers Uniforms, jumpers Sew side and sew interlining on the wrong side of the material Interior decorations Making pleats or gathers
APPLICATION FOR MH-481/MH-484/MH-486 SERIES
6
www.egemakine.com.tr
MH-481, 481-5(4), 484, 484-5(4), 486-5(4) (September, 2003) 2/2
Model name MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4) Remarks
Condensation stitch ○ ○ ○ ○ ○ Use the reverse stitching lever Reverse stitch ○ ○ ○ ○ ○ Adjust the stopper Thread clamp device
○―○○
Needle thread releasing device
○―○○
Needle thread drow-out
○―○○
mechanism Thread spreader ○ ○ ○ ○ Movable needle guard ○ ○ ○ ○ Sliding presser ― ○ ○ ○ ―
Chain-off thread presser
○ Option Option ○
Chain-off thread presser foot for the MH-480 series
Silicon oil lubricating unit ○ ○ ○ ○ ○
Provided as standard (packed together with accessories)
Model Part No. Description Remarks
Application
MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4)
AK4
Auto-lifter
○―○○
PF-3
Partial shirring device Upper shirring
○
PF-5
Partial shirring device Lower shirring
○
S060 MAS-06000A0
Attachment for gathering
○
(manual type)
Specialized presser foot,
S061
MAS-061000A0
Attachment for intermittent
main feed dog,
○
gathering (foot pedal type)
MH-481, MH-481-5(4) MH-484, MH-484-5(4)
MH-486-5(4)
MH-486-5(4)
MH-481U
REPLACEABLE GAUGE TABLE
Usage Throat plate Feed dog Presser foot
Light-weight
B1103-481-A00 B1613-481-A00 B1524-481-CC0
materials
Medium-weight
B1103-481-F00 B1613-481-F00 B1524-481-CC0
materials
Heavy-weight
B1103-481-H00 B1613-481-H00 B1524-481-H00
materials
• In addition, a urethane feed dog and coarse feed dog are also available.
Usage Throat plate
Main feed Differential-
Presser foot
dog feed dog
Light-weight
B1103-484-B00
―――
materials Medium-weight
material B1103-484-F00 B1613-484-F00 B1653-484-F00 B1524-481-CC0 (standard)
Urethan pad
B1613-484-G00 B1653-484-G00
Reverse feed
――
B1653-484-C00
dog Gathering
one piece
―――
B1524-481-DA0
of material
• S060 and S061 are optionally available. (Use the presser foot, main feed dog and differential-feed dog exclusive for this attachment)
Code Usage
Throat
Feed dog
Walking Presser
plate foot foot
Standard type for general runstitch
B3026-487-000 B1524-486-0A0
(rake-in type)
B
For medium turning stitch, gathering stitch
B3026-487-000 B1524-486-BA0
(rake-in type: for preventing uneven matelial feed)
D
For sharp turning stitch
B1103-481-F00 B1613-481-F00 B3026-487-D00 B1524-486-DA0
(pull-in type: for preventing puckering)
M
For seaming side of slacks
B3026-487-M00 B1524-486-MAA
(right-compensaling foot for side pockets)
S
For sharp turning stitch
B3026-487-S00 B1524-486-SA0
(rake-in type: for preventing puckering)
OPTIONS
SPECIFICATION CONFIRMATION TABLE WITH TYPES OF MACHINES
Presser foot Code
Standard Sliding foot C
www.egemakine.com.tr
MH-1410 (September, 2003) 1/2
MH-1410D/AK122/V072
SPECIFICATIONS
With its head mechanism to ensure optimum balance and high rigidity, the machine achieves high-speed performance of 5,000rpm with reduced operating noise and vibration.
And now that an automatic lubricating system and strong needle­feed mechanism are newly adopted, the machine guarantees improved reliability and durability.
The MH-1410 is a needle-feed machine noted for an outstanding feed efficiency that ensures smooth stitching at the beginning of sewing and consistent stitch pitches when sewing multi-layered sections.
The machine uses a right-and-left split type needle thread take-up guide. Even when the right and left needles sew materials of different thicknesses, separate stroke can be set for the right and left thread take-up guide to ensure consistently excellent seam quality.
The differential between the needle-feed amount and bottom-feed amount can be adjusted within the range of -5 % to +25 % of the latter. Waving or twisting of the material can be prevented by adjusting the differential-feed amount to suit the material thickness, the type of folder to be used, and other sewing conditions.
The cloth puller is driven by a top roller, ensuring excellent feed efficiency and uniform stitch pitches at multi-layered parts of the material.
The machine comes with a light-in-weight roller that offers good adhesion on the material to ensure consistent stitch pitches regardless of the sewing speed, i.e., both at a low high speeds.

MH-1410

High-speed, Cylinder-bed, Needle-feed, Double Chainstitch Machine
5,000rpm (when stitch length is 4.5mm or less) 4,000rpm (when stitch length is 4.5〜6.4mm) (4,000rpm for the machine provided with cloth puller)
MH-1410A
31.8mm (1-1/4")
Model name
Needle gauge
Number of needle
Feed system
Stitch system
Max. sewing speed
Stitch length Stitch adjusting method Lift of the presser foot Needle bar stroke Needle
(at the time of delivery) Looper motion Fine adjustment function
for the needle-feed amount Peripheral dimension
of the cylinder section Lubrication Lubricating oil Weight of the machine head
MH-1410B
34.9mm (1-3/8")
MH-1410C
38.1mm (1-1/2")
MH-1410D
6.4mm25.4mm6.4mm (1/4"1"1/4")
Needle-feed
Needle-feed + Cloth puller (optional)
Double chainstitch
2-needle 4-needle
2.16.4mm
By push-button (needle-feed/bottom-feed synchronized)
9mm
32mm
DV×57 (#21) #18〜#25
Longitudinal motion method (longitudinal swing method) : Looper can be tilted for threading
Provided as standard (–5%〜+25%)
395mm (for the machine that is not equipped with cloth puller)
Trochoidal pump type automatic lubrication
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
46kg 50kg
For needle size #23 to #25, a special-order gauge is required.
6
www.egemakine.com.tr
MH-1410 (September, 2003) 2/2
WHEN YOU PLACE ORDERS
OPTIONS
MH1410 / /
Needle gauge
2-needle: 31.8mm (1-1/4") 2-needle: 34.9mm (1-3/8") 2-needle: 38.1mm (1-1/2") 4-needle
6.4mm25.4mm6.4mm
(1/4"+1"1/4")
Code
A B C
D
Code
AK122
Code
V072
Pneumatic auto-lifter
Not provided provided
Cloth puller
Not provided provided
The needle gauge that falls within the range from
4.8mm to 50.8mm is available.
Gauges other than those shown in the above table are
available on a special order.
The V072 cannot be retrofitted to
your machine after the setup. Designate one when placing order for the machine.
Part N o.
GAK-A22010B0 311-42565
311-43068 311-43167 311-41658 MAV-07236000 MAV-07237000 MAV-07240000
Model
AK122
― ― ― ― ― ― ―
Description
Pneumatic auto-lifter (JUKI: The SC-380 or a commercially available needle positioning motor is required.)
Needle cooler (pneumatic type): For MH-1410A Needle cooler (pneumatic type): For MH-1410B, MH-1410C Needle cooler (pneumatic type): For MH-1410D Brakedown folder bracket (asm.) Top roller (made of iron) Top roller (made of urethane) Top roller cover (for urethan roller)
www.egemakine.com.tr
MS-1190, 1260, 1261 (September, 2003) 1/5
Model name
Application No. of needle
Max. sewing speed Needle bar stroke
Needle
(at the time of delivery)
Needle gauge Stitch length
Lift of the presser foot
Thread take-up lever Circumference of
tube at the needle entry
Needle guard Stitch adjusting
system Lubrication
Lubricating oil
MS-1190 MS-1190M MS1260/V045 MS-1261M/V045 MS-1261/V045
MS-1190/V046 MS-1190M/V045 MS-1260 MS-1261M MS-1261
For light-weight For medium-weight For extra heavy-weight
materials materials
For medium-to heavy-weight materials
materials for jeans
23
4,000rpm (normal 3,500rpm) 3,600rpm (normal 3,000rpm)
28.0mm 33.2mm
SCHMETZ B-64 (Nm80) SCHMETZ B-64 (Nm100) SCHMETZ UY128GAS (Nm120) SCHMETZ UY128GAS (Nm130)
Nm60〜Nm90 Nm80〜Nm120 Nm100〜Nm140 Nm100〜Nm140
ORGAN TV×64-NY (#12) ORGAN TV×64-NY (#16) ORGAN UY×128GAS-NY (#19) ORGAN UY×128GAS-NY (#21)
#8〜#14 #12〜#19 #16〜#22 #16〜#22
3.2mm (1/8"), 4.0mm (5/32"), 4.8mm (3/16"),
4.8mm (3/16")
5.6mm (7/32"), 6.4mm (1/4"), 7.2mm (9/32"),
5.6mm (7/32"), 6.4mm (1/4") 8.0mm (5/16"), 9.6mm (3/8")
1.2〜3.2mm 1.4〜4.2mm 10mm
Thread pulling cam type
Needle bar thread take-up lever
thread take-up lever
171mm 190mm
Longitudinally-fixed needle guard Backward travelling needle guard
By push-button (with locking mechanism)
Semi-automatic lubrication
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Both needle thread tension and bobbin thread tension have been decreased
after reinvestigation of the double chainstitching mechanism. Furthermore, the stitch dial, gauges and looper have been dramatically improved, thereby forming beautifully finished seams and preventing puckering.
Relation between the needle and the looper, and the relation between the
needle and the feed have been changed. This enables the machine to consistently form seams of uniform quality. The machine prevents stitch skipping when it runs at high speed, thereby producing higher-grade products.
Newly developed folders are equipped as standard for the machine.
The folders are designed to match the presser foot and allow overlapping material to be fed smoothly under them. They are easy to use and improve consistency in sewing. Many different kinds of folders are prepared in accordance with the materials, ranging from extra heavy-weight materials to medium-weight materials.
MS-1190
The placement of the feed mechanism has been charged to decrease the
feed amount when the needle enters the material, thus preventing the needle from bending. The bobbin thread is clamped without fail, thereby producing consistent thread loops. The looper tucks the needle thread without fail, thereby finishing uniform seams.
The number of teeth of the feed dog has been increased so that it can
easily catche overlapping material. The shape of the presser foot has been modified to prevent single-sided contact with the overlapped part. The movable needle guard (rear) is provided with a vertical adjusting mechanism. These features contribute to smoother feed of heavy-weight materials, thereby preventing stitch skipping.
Thanks to the tread guide located between the needle bar thread take-up
and the intermediate tension release lever, the timing to tense the needle thread can be changed and the bobbin thread tension can be decreased. As a result, the machine is capable of beautiful finished stitches with a soft appearance even when heavy-weight material is used.
MS-1261/V045
SPECIFICATIONS
MS-1190
Feed-off-the-arm, 2-needle Double Chainstitch Machine
MS-1260
(2-needle)
MS-1261
(3-needle)
Feed-off-the-arm, 2-needle/3-needle Double Chainstitch Machine
6
www.egemakine.com.tr
Loading...