Page 1
AMS-224EN-6060
Computer-controlled Cycle Machine with Input Function
AMS-224EN-6060
The sewing area is broadened to "600mm(width) × 600mm(length)".
This sewing machine is best-suited
to the sewing of large products such as airbags.
JUKI ECO PRODUCTS
Th e AMS-224EN -6060 is
an eco-friendly product which complies with JUKI ECO PRODUCTS standards for protecting the environment.
The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous
substances, which is stricter than other restrictions, such as those of the RoHS Directive.
For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.j p/eco_e/index.html
The RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.
The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.
Page 2
Auto-chuck and eject device
When the cassette section of the feeding
frame pattern is placed near the feed
mechanism, the sensor detects it to allow it
to be installed automatically. When the
sewing machine finishes sewing, the pattern
is automatically removed. This means that
installation/removal of the feeding frame
pattern is carried out with ease.
Programmable intermediate presser
With the programmable intermediate presser, the height of the lower
dead point of the intermediate presser can be set according to the
material thickness, thereby not only preventing troubles in sewing such
as stitch skipping and thread breakage, but also protecting the sewing
product from being damaged by the presser. The height setting can be
changed with ease even during sewing. The machine finishes beautiful
uniform seams free from
stitch skipping even on
multiple parts of the material
Semi-dry head
The frame (needle bar unit and thread take-up unit) is lubricated with grease, and the hook
is fed with a minute quantity of oil from the oil tank.
JUKI’s advanced dry technology, which is utilized in a number of our sewing machine
by the ideal combination of
the active tension and
programmable intermediate
presser.
models, protects your products from being stained with oil.
IP-420
Active tension
With the active tension, pinpoint changes in the needle thread tension during sewing are
enabled. The needle thread tension, therefore, can be set in conjunction with the material
thickness and can be corrected according to the direction of sewing on a stitch-by-stitch
basis through the operation panel. Since the needle thread tension is reproducible,
supporting a broader range of sewing conditions, the time required for setup changing
upon process changeover can be reduced.
OPTIONS
Programming software for computer-controlled sewing machines 「PM-1」Ver.3●
On the PM-1 programming software, a sewing data shape can be checked more precisely as compared with the IP-420.
Devices / Parts●
Description
Part No.
＊Refer to the catalog for the AMS-224EN for details.
Needle cooler (asm.)
40035692
Side wiper (asm.)
40035867
Wiper relay cable asm.
The large-sized liquid crystal touch panel, which has
been developed to ensure ease of operation, dramatically increases efficiency in edit work.
The memory storage capability of the main body of the
sewing machine has been dramatically enhanced. Now
the USB-ready main body of the sewing machine uses
many different kinds of media.
40080837
New programmable intermediate presser
The intermediate presser goes up and comes down
by programming according to the material thickness.
Tension controller No. 3 asm.
40072310
Bar-code reader
40089238
SPECIFICATIONS
Max. sewing speed
Sewing area
Settable stitch length
Lift / Stroke of intermediate presser
Variable lower position of the intermediate presser
Change in height of the intermediate presser
Needle thread breakage detecting device
Needle thread clamp
Thread trimming device
Needle (at the time of delivery)
Storage of pattern data in the memory
Lubrication
Lubricating oil
Sewing machine motor
Power requirement Power consumption
Compressed air / Air consumption
Total weight
Dimensions
＊sti/min stands for Stitches per Minute.
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
Application
Code
heavy-weight H
※Two locations of the auto-chuck and eject device section (100 mm × 100 mm) are out of the sewing area.
Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
External media: Max. 49,950,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
The frame is lubricated with grease / The hook and hook driving shaft gear box are lubricated from a tank
Sewing area
X: 600mm - Y: 600mm 6060
AMS224ENHC6060SZ S
2,000 sti/min* (stitch length 3mm or less)
600mm (X) × 600mm (Y)
Lifting amount : 15mm / Stroke : Standard 4mm (0〜10mm)
Stepless control by programming (controlled by a stepping motor)
Stepping-motor driven clamping on the underside of the throat plate
High-speed thread trimming mechanism driven by a stepping motor
Hook: JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
0.5〜0.55MPa (Max. 0.55MPa) / 1.8dm
710kg ※Weight of the feeding frame pattern is not included.
Code
0.1〜12.7mm (0.05mm step)
Standard 0〜4.0mm
Provided as standard
DP × 17(#24) Bpoint (135 × 17 FG Nm180)
Compact AC servomotor (direct-drive system)
Single-phase,3-phase 200〜240V / 550VA
2,000mm (W) × 1,800mm (D) × 1,275mm (H)
(without thread stand)
Option
Code
Not provided Z
3
/min (ANR)
Power supply
3-phase 200〜240V D
Single-phase 220〜240V K
Code
Feeding frame type
Code
Auto-chuck and eject device C
＊The feeding frame pattern is not supplied with the sewing machine. It should be separately ordered.
Stitch type
Standard S
Code
To order, please contact your nearest JUKI distributor.
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO
206-8551, JAPAN
PHONE : (81) 42-357-2254
(
FAX :
SEWING MACHINERY BUSINESS UNIT
✽
Specifications and appearance are subject to change without prior notice for improvement.
✽
Read the instruction manual before putting the machine into service to ensure safety.
✽
This catalogue prints with environment-friendly soyink on recycle paper.
http://www.juki.com
)
81
42-357-2274
Subclass
Code
Standard 5000
Subclass 5001〜
Operation panel
Code
Standard (IP420) S
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in
the research, development, design, sales, distribution,and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
(1) The development of products and engineering processes
that are safe to the environment
(2) Green procurement and green purchasing
Energy conservation (reduction in carbon-dioxide emissions)
(3)
(4) Resource saving (reduction of papers purchased, etc.)
(5) Reduction and recycling of waste
(6) Improvement of logistics efficiency (modal shift and
improvement of packaging, packing, etc.)
JULY, 2012 Printed in Japan(C)
Loading...