Juiceman JM3000 Instruction Booklet

Instruction Booklet
3 in1
Total Juicer
JM3000
Thank you
for your purchase!
Register online at :
www.prodprotect.com/applica
Rate & Review your product
www.juiceman.com
Share your pictures & stories with us online
Should you have any questions or concerns with your new product, please call our Customer Service Line at 1-800-231-9786 (US and Canada).
Please do not return to the store.
3
Read all instructions and save for future reference:
Remove any stickers before using the juicer.
To protect against risk of electrical shock, do not put cord, plugs or appliance in water or other liquid.
Fully unwind the power cord before use.
Always make sure the juicer is properly assembled before plugging in and using.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use, before putting on or taking off parts, or before cleaning.
Avoid contact with moving parts.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact the consumer service number listed in this manual.
This appliance has important markings on the plug blade. The attachment plug or entire cord set (if plug is molded onto cord) is not suitable for replacement. If damaged, appliance should be replaced.
The use of attachments not recommended by Juiceman, including canning jars may cause fire, electric shock or injury.
Do not use outdoors.
Do not let cord hang over edge of table or counter.
Do not let cord touch hot surfaces or become knotted.
Do not operate without the pulp container in place
Always make sure juicer is assembled properly before turning on.
Blades are sharp; handle carefully.
To reduce the risk of injury, never place blending blade base on motor base without blending cup properly attached.
Be sure to turn switch to OFF position after each use. Make sure the motor stops completely before disassembling.
Do not leave the appliance unattended when in use.
Use caution when operating the appliance – do not place hands or fingers near moving or rotating parts.
Do not put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in opening, use food pusher or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off, unplug the appliance and disassemble juicer to remove remaining food.
Do not use the appliance if the rotating sieve is damaged.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Do not use this appliance for other than intended use.
Keep the appliance clean; refer to CARE AND CLEANING section of this manual.
Do not blend hot liquids.
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
All Juiceman products are designed with your safety in mind. When using electrical appliances, basic safety precautions should always be adhered to, including the following:
SAVE THESE INSTRUCTIONS
This product is for household use only.
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped
with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD
1)
A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
2) If a long detachable power-supply cord or extension cord is used,
a) The marked electrical rating of the
extension cord should be at least as great as the electrical rating of the appliance,
b) If the appliance is of the grounded
type, the extension cord should be a grounding-type 3-wire cord, and
c) The longer cord should be arranged so
that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
Note: If the power cord is damaged, please contact the warranty department listed in these instructions.
Safety Features
4
Meet
your
Juice and blend with the convenience of one appliance!
Press fresh citrus with the citrus juicer; juice a variety of fruits and vegetables with the extractor; and blend creamy smoothies and drinks with the blender! All attachments are powered by one base so you can enjoy delicious beverages in no time.
1. Motor base
2. Pulp separator
(Par t #770321)
3. Filter basket (Part #770300)
4. Lid (Pa rt #77031 8)
5. Wide mouth feed chute
(Part #JM3000-01)
6. Large food pusher (Part #770280)
7. Small food pusher (Part #770278)
8. Pulp container (Part #07345GZ9PZ13)
9. BPA free blending cup
(Part # 081364PZ16-S)
10. Blending blade base
(Par t #770319)
11. Blending cup travel lid
(Par t #770314)
12. Citrus juicer gear reduction
(Par t #770320)
13. Citrus juicer pulp container
(Par t #770323)
14. Citrus Cone (Part #04219MZ185)
15. Citrus juicer strainer (Part #04220MZ185)
Product may vary slightly from what is illustrated.
3-in-1
total juicer
1
2
3
4
5
6
7
8
9
10
11
15
13
12
14
5
Perfect For:
Small and large citrus
fruits, a variety of fruits
and vegetables, leafy
greens, berries, yogurt,
bananas and other
soft foods, seeds and
powders.
HOW TO JUICE
This product is for household use only.
GETTING STARTED
Remove all packing material, any stickers, and the plastic band around
the power plug.
Go to www.prodprotect.com/applica to register your product and visit
www.juiceman.com for more recipes, tips and tricks.
Wash all removable parts as instructed in CARE AND CLEANING
Important: Do not rinse or immerse base in water or any other liquid.
Place base on a dry, level counter and get ready to juice.
PREPARATION
Juicing is one of the easiest ways for your body to get the nutrients it needs. Follow these tips to ensure the juice you’re fueling yourself with is as fresh as it can be!
PURCHASING AND STORING INGREDIENTS
Always use fresh, fully ripened fruits and vegetables.
Select fruits and vegetables that are in season for freshness
and flavor.
Choose fruits that are plump, tender and have a bright color. Fruits
should be heavy for their size without bruises, cuts or blemishes.
To ripen fruit, place in a small clean paper bag. Close the bag loosely
and let stand at room temperatures. To speed ripening, add a ripe apple or banana to the bag. Once ripened, store in the refrigerator for a day or two until ready to use.
Store perishable vegetables in the refrigerator until ready to use.
6
PREPARING FRUITS AND VEGETABLES FOR JUICING
h
i
2
Wash fruits and vegetables thoroughly before juicing. TIP: Use a natural bristle brush and biodegradable cleaner to help remove pesticide residue.
h
i
2
l
o
w
1
Trim any bruised or discolored sections of fruit and vegetables. Remove and discard outer leaves.
h
i
2
l
o
w
1
o
f
f
0
You can juice with the skin on but the skin of citrus fruits can taste bitter so we recommend removing their peel.
h
i
2
l
o
w
1
o
f
f
0
Remove pits and large seeds from fruits, including apricots, cherries, nectarines, mangoes, peaches, plums and melons.
h
i
2
l
o
w
1
o
f
f
0
Pack leafy greens, parsley, wheat grass and sprouts into small, tight bunches before juicing.
h
i
2
l
o
w
1
o
f
f
0
The large feed chute is designed to fit larger produce such as whole apples, beets, and oranges. If necessary, cut into pieces to fit in the feed chute.
h
i
2
l
o
w
1
o
f
f
0
Be sure all parts of the juicer are clean and dry. See CARE AND CLEANING section of this manual.
7
JUICE EXTRACTOR
8
ASSEMBLING YOUR JUICE EXTRACTOR
Step 1: With motor base on a flat surface, place pulp
separator on motor base, aligning the tabs and turning clockwise to lock in place.
Step 2: Grab filter basket by the outer rim and place into
pulp separator, pushing down to lock in place.
Note: Use caution when handling filter basket as
blades are sharp.
Step 3: Place lid on top of pulp separator, aligning tabs
and turning clockwise to lock in place.
Step 4: Slide the pulp container under the lid: first place the
opening under the lid at an angle and then slide the bottom towards the base.
Step 5: Place juice cup or your own container under the
anti-drip spout. Open the anti-drip spout by turning counterclockwise and you are ready to juice!
USING YOUR JUICE EXTRACTOR:
1. Make sure the juicer dial is in the O (OFF) position. Plug in the juicer and prepare your ingredients.
2. Turn the dial clockwise to | (ON) to being juicing.
3. Place your produce in the wide mouth feed chute.
4. Guide the produce towards the filter basket using the appropriate food pusher.
9
5. When juicing smaller ingredients, we recommend placing ingredients in the large food pusher and guiding the produce with the small pusher.
a. To separate the large pusher from the small pusher,
hold the large pusher in one hand and turn the small pusher counterclockwise.
b. To assemble the pushers, place the small pusher into
the large pusher and turn clockwise.
6. The juice extractor has one speed to ensure smooth and consistent results.
7. When you are finished juicing, turn the dial counterclockwise to O (OFF). Do not disassemble until the filter basket comes to a complete stop.
8. Turn the anti-drip spout clockwise to prevent any spills.
9. Remove the pulp container from the base to repurpose the pulp or clean it out.
Note: You may need to empty the pulp container during juicing. Make sure
to turn off the juicer before removing the container and washing before beginning to juice again.
10. Enjoy your fresh juice or add additional ingredients to blend!
DIS
ASSEMBLING YOUR
JUICE EXTRACTOR
Step1: Make sure the juicer is off and unplugged.
Remove the easy-grip pulp container from the motor base by sliding the bottom out and pulling away from the underside of lid.
Note: Make sure the anti-drip spout is in the closed position.
Step 2: Unlock the pulp separator from motor base by
turning counterclockwise and remove the entire top assembly as one piece (the lid, pulp separator and filter basket) to prevent pulp from falling. When this is done, the filter basket will automatically release within the pulp separator for disassembly.
Step 3: Take entire top assembly to the sink to
disassemble and clean.
Step 4: Remove food pushers.
Loading...
+ 19 hidden pages