JUGS Sports L-Shaped Screen User Manual

SAVE THESE INSTRUCTIONS

C. Snap the

3-way fitting on the longer side of the middle section onto the single upright piece.

Step 4: Top Section

A. Snap together the pieces of the top

section.

B. Connect the top section to the 3-way

fittings on the middle section, making sure the lock buttons on the bars of the top section are facing the same direction as the holes in the bars of the middle section. The frame of your JUGS Quick-Snap® L-Shaped Screen is now complete.

Step 5: Netting

A. After completing the frame assembly,

carefully tilt the frame forward and lay it on the ground.

B. Then, stretch the netting out across the

ground with the open end just touching the top of the frame.

C. Stand in the center of the frame and

begin pulling the netting onto the tubing, alternating sides as you go.

D. Finally, stand your screen back up. Your

JUGS Quick-Snap® Screen is now complete.

L-Shaped

Protective

Screens

ASSEMBLY

INSTRUCTIONS

If you need

more information about

this product

or any other

JUGS product or service,

please contact

the manufacturer:

In the USA and Canada,

call toll-free:

1-800-547-6843.

For International Orders,

call collect:

0-503-692-1635.

Our fax number is

1-503-691-1100.

Visit our website at

www.jugssports.com.

Se habla español.

QSLSPSI-1008

Step 1: Base

A. Snap the

two feet on one end of the base into its 4-way fitting.

B. Do the

same with the two feet on the other end of the base.

C. Snap the two long parts of the base

together, making sure the lock button is secure in the hole.

Step 2: Single Upright

A. Snap the single upright piece into

either one of the two 4-way fittings on the base.

JUGS Quick-Snap®

L-Shaped Screen

Assembly Instructions

Take the frame sections and netting from your bag and separate them. Then follow these five easy steps.

Step 3: Middle Section

A. Snap the pieces of the middle

section together.

B. Snap the shorter bar—upright—into

the other 4-way fitting on the base.

Top Section

Single Upright

Middle Section

Base

lock

button

READ NOW

This protective s c r e e n m a y n o t p r o v i d e protection from batted or pitched balls which have re b o u n d e d or ri co ch eted off t h e p i t c h i n g m a c h i n e , th i s screen, or other structures.

THE MACHINE O P E R A T O R , P I T C H E R , B A T T E R , O R F I E LD E R MUST REMAIN ALERT AT ALL TIMES.

T h e m a c h i n e op er at or mus t wear a bat ting h e l m e t a n d eye prot ectio n while operating t h e m ac h i n e . Failure to heed t h i s w a r n i n g m a y re su l t in serious injury or death.

WARNING