ank you for choosing the JTS wireless system. In order to obtain the best eciency from the system,
you are recommended to take few minutes to read this instruction manual carefully.
INDEX
1. Important Caution
2. Features
3. Specication
3-1 Receiver// US-36G2
3-2 Handheld Transmitter // Mh-36G2
3-3 Body-pack Transmitter // PT-36BG2
3-4 Optional Condenser Microphone
4. Part Identication & Accessories
4-1 Receiver // US-36G2
4-2 Handheld Transmitter // Mh-36G2
4-3 Body-pack Transmitter // PT-36BG2
4-4 Optional Condenser Microphone
4-5 Accessories
1
1
2
2
2
3
3
6
6
7
8
9
13
5. Preparing Procedures & Basic Operation
5-1 Receiver// US-36G2
5-2 Handheld Transmitter // Mh-36G2
5-3 Body-pack Transmitter // PT-36BG2
5-4 Installation of Condenser Microphones
6. Recommendation
7. Important Notice
14
14
17
19
20
22
22
WIRELESS MICROPHONE SYSTEM
1
1. Important Caution
Always make all connections before plugging the unit into an AC power outlet. •
Do not leave the devices in a place neither with high temperature nor high humidity.•
Always do not handle the power cord with wet hands !•
Keep the devices away from re and heat sources. •
2. Features
Due to the PLL synthesized technology, the system can oer up to 1441 selectable frequencies •
for choosing simultaneously.
6 groups, maximum 23 channels in one group.•
e true diversity reception with 2 independent RF receivers ensure the stable transmission and •
reception.
Adjustable Pilot tone squelch control can eectively reduce the noise. •
Equipped with S.A.W. lter benets the interference-resistant. •
Tuned antennas can benet the stable RF reception.•
Built-in Noise Squelch circuity & Mute function are available to restrain the interference for •
signals.
•
Rugged metal housing can pass through the dicult environment.
Equipped with balanced XLR and balanced output allow great convenience.•
Anti-interference design is available to work with every computer device.•
Transmission power selectable between 10 and 50mW (depends on local regulation).•
LCD / LED
Group, Channel, Frequency, Antenna A/B, Mute Display, AF
Meter (LED BAR), RF Meter (LED BAR) , Baery Status
Power On/O, Group, Channel, Frequency Up/Down,
Frequency Scan, Audio Level, Lock-on, Output Pad