JTS GM-5212T, GM-5218T, JS-22MXC Instruction Manual

INSTRUCTION MANUAL
Dimension:
T8125-MG T2125-MGJS-22MXC
Ø22.5
77
Ø8
Ø8
Ø21.0
103.5 50 100 110
468
103.5
Ø22.5
Ø8
Ø8
Ø21.0
50 250
110
620
Ø22.5
GM-5212T/GM-5218T JS-22MXC
59512-005
0
-10dB
1/2” Condenser Microphone
JS-22MXC
Installation:
GM Series Gooseneck Microphones
(Figure 3)
(Figure 4)
(Figure 2)
(Figure 1)
mixer
Specification:
Accessories:
Windscreen
Model Variations:
1/2” golden plated capsule
Cardioid pick up pattern
Built in low cut and pad
Detachable capsule module design for expansion application
Features:
Type................................
Frequency Response....
Sensitivity......................
Polar Pattern..................
Attenuation Switch.......
Low Frequency Roll-off
Impedance.....................
Max. SPL For 1% T.H.D. Signal To Noise Ratio...
Power Supply.................
Current consumption....
Output............................
Condenser Mic 20~20,000 Hz
-36±3 dB* (15.8mV) 0dB =1V /Pa,1kHz Cardioid
-10dB 80Hz 100Ω 140 dB 78dB 36~52VDC phantom power 3mA XLR-M type(power module)
Length............................
GM-5212T : 468mm GM-5218T : 620mm
GM-5212T / GM-5218T
1/2” Gooseneck Microphone
1. Equipped with built-in power module, that an external 9V ~ 52V DC source is required to power the unit.
2. Plug connector insert directly into a 3P panel jack on floor stand or conference table. (Figure 2)
3. Adjust gooseneck for aiming the microphone toward the proper sound source. (Figure 3)
4. Slip on windscreen over the microphone head to control breath and popping noise. (Figure 4)
The GM-5212T/GM-5218T bring studio quality sound to PA. The JS-22MXC capsule module is built on a solid brass with accurate processing. The 1/2” golden plated diaphragm is manually assembled by JTS craftsman. Precise designed circuit with low cut and pad provides flat response. This microphone royally reproduces any kinds of vocal and music instruments.
125Hz 250Hz 500Hz
1000Hz
2000Hz 4000Hz 8000Hz
16000Hz
+10
0
-10
20 100 200 500 1k 2k 5k 10k 20kHz
Loading...