JTS CX-500FHW, MA-500 User Manual

1

FEATURE

The CX-500FHW is built with full range omni-directional capsule
with golden plating in and outside. The flat frequency response
reproduces all types of flutes. The dynamic design of the headset
can render a flutter inter change flutes freely. The option of left and
right worn plus adjustable boom can help finding the best miking.
CX-500FHW is bundled MA-500 phantom power adapter for wired
application.

59010-606

www.jts.com.tw

E-mail:[e-mail]
TEL:[phone] FAX:[phone]
Taichung City 41280, Taiwan (R.O.C.)
No.148, Gongye 9th Rd., Dali Dist.,

PROFESSIONAL CO., LTD

Omni directional pick up pattern
Ultra-light, ergonomic design for convenient and comfortable wearing.
Stainless-steel, and unbreakable material ensure ruggedness and reliability.
Soft and Flexible boom perfectly fit into any performer.
Tiny and skin-tone boom visually disappears against the face.
Replaceable cable for easy installation and service.
Excellent sound quality with smooth frequency response.
Carry Pouch and cable clip are provided.
Terminated with 4 pin mini XLR for easy wireless application
Phantom power adapter with low cut and pad provided for wired application

CX-500FHW

/

MA-500

Head worn Flute Microphone / Phantom power Adapter

PARTS IDENTIFICATION AND ACCESSORIES

2

Parts identication

Flexible boom

1

Slide pivot

2

Adjustable ear hook

3

Detachable cable

4

Adjustable headband

5

4-pin mini XLR female connector

6

3

5

Adjustable

3

headband

Accessories

7

Carry Pouch
Cable clip

8

9

MA-500 Adapter: 1 piece

10

Windscreen : 2 pieces

SPECIFICATION

3

7

CX-500FHW

Type............................... Omni-directional Condenser

Frequency Response... 20~20,000 Hz
Sensitivity (at 1,000 Hz) -58±3dB*(1.25mV)*0dB=1V/μbar

Impedance..................... 1.5kΩ

Max.SPL for 1% T.H.D. 130 dB
Signal-To-Noise Ratio... 68 dB

Output Connector.......... 4P Mini XLR

Power Supply................. 1-5 VDC

Current Consumption.... ≤0.05mA

Weight............................. 6.5 grams (including cable)

Dimensions (mm)........... Ø6mm(W)*13mm(H)

Standard Accessory....... MA-500

1

4

2

9

10

Detachable cable

8

6

MA-500

MIC Input..................

Output......................

Phantom Power........

PAD...........................

Low Cut.....................

Frequency Response

Impedance................

T.H.D.........................

S/N............................

Weight......................

Dimensions(mm)......

4P Mini XLR(Male)
XLR(Male)
12~48V

-10dB
100Hz -6dB
400Hz -4dB
30~20,000Hz

220Ω

<0.045%@1KHz -50dB
>95 dB
40g
Ø20mm*94.5mm(H)

Input: 4P Mini XLR (Male)

Pin 1: GND

Pin 2: V+

Pin 3,4: Audio signal

Output: XLR (Male)

Pin 1: GND

Pin 2,3: Audio signal

(Phantom Power Supply)

123

4

1 2

3

NI CIM

MIC IN

V+

TUPTUO

PIN2 OUT(+)

PIN3 OUT(−)

+10

0

0

-1

20 100 200 500 1k 2k 5k 10k 20kHz

User Manual

4

A

Try on whether the headset is t

B

Adjust the headband to a suitable width

C

Tighten or loosen the curve of the ear-hook by twisting
the loop or expanding it

D

Curve and bend the boom to t your face

E

Attach the detachable cable to a suitable place by a cable clip

Please maintain the temperature in proper status it helps the Submin­iature Condenser Instrument Microphone to lengthen its life.
Using the part and adapter made from JTS to ensure the unit quality
and lifetime. Do not attempt to employ non-standard adapters or
connectors as you might damage the unit

1000Hz

125Hz

}

250Hz
500Hz

}

2000Hz
4000Hz
8000Hz

16000Hz

}

A

D

C

E

B