JST JST PH CKS Datasheet

47

2

3

4

5

6

This is a thin, low-profile 2.0mm (.079")
pitch connector 7.5mm (.295") in height
after mounting and 4.5mm (.177") in width.
It is designed to meet the demand for
high-density connection of internal wires to
printed circuit boards. It is compact, highly
reliable and low in cost.

Features––––––––––––––––––––––––

• Reliable contact

The contact has long dimples near the center to ensure a good
connection at all times, even under conditions of vibration and
mechanical abuse, and when used with low voltage and low
current circuits.

• Fully shrouded header

The fully shrouded header has walls on all four sides to
prevent improper connection to the mating housing and to
prevent the instruction of flux and other contaminants.

• Printed circuit board retention mechanism

The solder side of the header has a retention mechanism that
prevents it from floating during soldering. As a result, the
header can be positioned accurately.

• Surface mount model (SMT)

This connector is also available in a surface mount
configuration. Its housing is made of heat resistant resin so
that it is not adversely affected during reflow soldering.
Because of its tiny size and ability to be surface mounted, this
connector meets the demand for high-density mounting of
components inside electronic products.

Specifications –––––––––––––––––––

• Current rating: 2A AC, DC (AWG #24)

• Voltage rating: 100V AC, DC

• Temperature range:

-25˚C to +85˚C

(including temperature rise in applying

electrical current)

• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.

• Insulation resistance: 1,000M Ω min.

• Withstanding voltage: 800V AC/minute

• Applicable wire: AWG #32 to #24

• Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")

* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog.

* Contact JST for details.

Standards ––––––––––––––––––––––

0

Recognized E60389

1

Certified LR20812

2

R75087

PH CONNECTOR

Disconnectable Crimp style connectors

2.0mm

(.079") pitch

Crimp

Emboss Tape

48

PH CONNECTOR

Note:

1. Contact JST for gold-plated contacts.

2. SPH-002T-P0.5L is low-insertion force type contact, for easier insertion/
withdrawal, which would be less resistant to the vibration. The crimp height is
different from the standard.

3. When using AWG#32 or #30 wires, reflow-treated headers
(Low insertion force type, Model No. B#B-PH-KL or S#B-PH-KL) are
recommendable.

4. Contact JST for details.

Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

<For reference> As the color identification,

the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.

ex. PHR-2-oo

-

(blank)…natural (white)
BK…black R…red TR…tomato red BL…blue Y…yellow
L…lemon yellow M…green D…orange N…brown
P…purple PK…pink H…gray LE…light blue
FY…vivid yellow

5.7(.224)

2.85(.112)

2.05(.081)

1.0

(.039)

2.08

(.082)

Model No.

SPH-002T-P0.5S
SPH-002T-P0.5L
SPH-004T-P0.5S

Applicable wire

2

mm

0.05 to 0.22

0.08 to 0.22

0.032 to 0.08

AWG #

30 to 24
28 to 24
32 to 28

Material and Finish

Phosphor bronze, tin-plated

Insulation O.D. mm(in.)

0.9 to 1.5(.035 to .059)

0.8 to 1.5(.031 to .059)

0.5 to 0.9(.020 to .035)

Q'ty /

reel

8,000
8,000

10,000

1.5

(.059)

Dimensions mm(in.)
AB

2.0( .079)

4.0( .157)

6.0( .236)

8.0( .315)

10.0( .394)

12.0( .472)

14.0( .551)

16.0( .630)

18.0( .709)

20.0( .787)

22.0( .866)

24.0( .945)

26.0(1.024)

28.0(1.102)

30.0(1.181)

5.8( .228)

7.8( .307)

9.8( .386)

11.8( .465)

13.8( .543)

15.8( .622)

17.8( .701)

19.8( .780)

21.8( .858)

23.8( .937)

25.8(1.016)

27.8(1.094)

29.8(1.173)

31.8(1.252)

33.8(1.331)

Material

Q'ty /

box

1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000

Circuit
No.1

1.9

(.075)

2.0

(.079)

Cir-

cuits

2
3

B

A

4.5(.177)

0.5
(.020)

6.35(.250)

0.6(.024)

4
5
6
7
8

9
10
11
12
13
14
15
16

Model No.

PHR- 2
PHR- 3
PHR- 4
PHR- 5
PHR- 6
PHR- 7
PHR- 8
PHR- 9
PHR-10
PHR-11
PHR-12
PHR-13
PHR-14
PHR-15
PHR-16

Nylon 66, UL94V-0, natural (white)

49

Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––

Top

entry

type

Side

entry

type

Top

entry

type

Side

entry

type

Cir-

cuits

Model No. Dimensions mm(in.)

A

B

Q'ty / box

Material and Finish

2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

2.0( .079)

4.0( .157)

6.0( .236)

8.0( .315)

10.0( .394)

12.0( .472)

14.0( .551)

16.0( .630)

18.0( .709)

20.0( .787)

22.0( .866)

24.0( .945)

26.0(1.024)

28.0(1.102)

30.0(1.181)

5.9( .232)

7.9( .311)

9.9( .390)

11.9( .469)

13.9( .547)

15.9( .626)

17.9( .705)

19.9( .783)

21.9( .862)

23.9( .941)

25.9(1.020)

27.9(1.098)

29.9(1.177)

31.9(1.256)

33.9(1.335)

1,000
1,000
1,000
1,000
1,000

500
500
500
500
500
500
250
250
250
250

1,000
1,000

500
500
500
500
250
250
250
250
250
250
250
200
200

Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)

S 2B-PH-K-S
S 3B-PH-K-S
S 4B-PH-K-S
S 5B-PH-K-S
S 6B-PH-K-S
S 7B-PH-K-S
S 8B-PH-K-S
S 9B-PH-K-S
S10B-PH-K-S
S11B-PH-K-S
S12B-PH-K-S
S13B-PH-K-S
S14B-PH-K-S
S15B-PH-K-S
S16B-PH-K-S

B 2B-PH-K-S
B 3B-PH-K-S
B 4B-PH-K-S
B 5B-PH-K-S
B 6B-PH-K-S
B 7B-PH-K-S
B 8B-PH-K-S
B 9B-PH-K-S
B10B-PH-K-S
B11B-PH-K-S
B12B-PH-K-S
B13B-PH-K-S
B14B-PH-K-S
B15B-PH-K-S
B16B-PH-K-S

The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.

Top entry type

Side entry type

(2 circuits)

(3 circuits or more)

PH CONNECTOR

<For reference> As the color identification,

the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.

ex. B2B-PH-K-oo

-

S…natural (white)
K…black R…red TR…tomato red
E…blue Y…yellow L…lemon yellow M…green
O…orange N…brown P…purple PK…pink H…gray
LE…light blue FY…vivid yellow (blank)…ivory

B

4.5(.177)

1.7(.067)

B

4.5(.177)

1.7(.067)

1.95

(.077)

0.5

A

(.020)

Circuit
No.1

1.95

(.077)

2.0

(.079)

6.0(.236)

3.4
(.134)

1.95

(.077)

B

0.5

(.020)

A

Circuit
No.1

6.0(.236)

1.6
(.063)

2.0

(.079)

4.8(.189)

1.7(.067)

0.5

(.020)

3.4

(.134)

Circuit
No.1

6.25(.246)

A

6.0(.236)(.134)

3.4

50

PH CONNECTOR

Top

entry

type

Side
entry

type

Top

entry

type

Side
entry

type

Cir-

cuits

Model No. Dimensions mm(in.)

AB

Q'ty / box

Material and Finish

2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

B 2B-PH-KL
B 3B-PH-KL
B 4B-PH-KL
B 5B-PH-KL
B 6B-PH-KL
B 7B-PH-KL
B 8B-PH-KL
B 9B-PH-KL
B10B-PH-KL
B11B-PH-KL
B12B-PH-KL
B13B-PH-KL
B14B-PH-KL
B15B-PH-KL
B16B-PH-KL

S 2B-PH-KL
S 3B-PH-KL
S 4B-PH-KL
S 5B-PH-KL
S 6B-PH-KL
S 7B-PH-KL
S 8B-PH-KL
S 9B-PH-KL
S10B-PH-KL
S11B-PH-KL
S12B-PH-KL
S13B-PH-KL
S14B-PH-KL
S15B-PH-KL
S16B-PH-KL

2.0( .079)

4.0( .157)

6.0( .236)

8.0( .315)

10.0( .394)

12.0( .472)

14.0( .551)

16.0( .630)

18.0( .709)

20.0( .787)

22.0( .866)

24.0( .945)

26.0(1.024)

28.0(1.102)

30.0(1.181)

5.9( .232)

7.9( .311)

9.9( .390)

11.9( .469)

13.9( .547)

15.9( .626)

17.9( .705)

19.9( .783)

21.9( .862)

23.9( .941)

25.9(1.020)

27.9(1.098)

29.9(1.177)

31.9(1.256)

33.9(1.335)

1,000
1,000
1,000
1,000
1,000

500
500
500
500
500
500
250
250
250
250

1,000
1,000

500
500
500
500
250
250
250
250
250
250
200
200
200

Post: Copper alloy, copper-undercoated, tin/lead-plated (reflow-treated)
Wafer: Nylon 66, UL94V-0, gray

B

A

1.95

(.077)

4.5(.177)

1.7(.067)

6.0(.236)

3.4
(.134)

0.5

(.020)

Circuit
No.1

(.134)

3.4

B

A

1.95

(.077)

2.0

(.079)

0.5

(.020)

4.8(.189)

1.7(.067)

6.25(.246)

6.0(.236)

1.6
(.063)

Circuit
No.1

B

6.0(.236)(.134)

A

1.95

(.077)

2.0

(.079)

0.5

(.020)

3.4

4.5(.177)

1.7(.067)

Circuit
No.1

Top entry type

Side entry type

(2 circuits)

(3 circuits or more)

Through-hole type shrouded header <Low insertion force type> –––––––––––––––––

Through-hole type PC board layout (viewed from soldering side) and Assembly layout–––

Note:

1. Tolerances are non-cumulative:

±

0.05mm(±.002") for all centers.

2. Hole dimensions differ according to the kind of printed circuit board and piercing method. If printed circuit boards made of hard material are used,
the hole dimensions should be larger. The hole dimensions shown above are reference values.
Contact JST for details.

Top entry type

Side entry type

<For reference> As the color identification,

the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.

ex. B2B-PH-KL-oo

-

(blank)…gray
R…red E…blue S…natural (white)

4.5

6.0(.236)

(.177)

2.0±0.05

(.079±.002)

0.7

(.028

9.6(.378)

7.6(.299)

+0.1

0
+.004

0

)dia.

4.8(.189)

(.246)

2.0±0.05

(.079±.002)

+0.1

0.7

0
+.004

(.028

)dia.

0

8.0(.315)

6.25

51

SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––

•

The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.

•SMT type shrouded headers are not TU¨V approved.

B
A

2.975

(.117)

2.0(.079)

5.0

(.197)

[2.0

(.079)]

1.9(.075)

6.6(.260)

2.2

(.087)

1.4

(.055)

Circuit No.1

B

A

2.95

(.116)

2.0

(.079)

2.4(.094)

5.5(.217)

6.0(.236)

(.063)

1.6
[2.6

(.102)]

SM3, SM4 type

SM3 type

SM4 type

Side entry type

Top entry type

Cir-

cuits

Model No.

Dimensions mm(in.)

Top entry

type

Side entry

type

Top entry type

Side entry type

A

B

Q'ty /

reel

Material and Finish

2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

B 2B-PH-SM3-TB
B 3B-PH-SM3-TB
B 4B-PH-SM3-TB
B 5B-PH-SM3-TB
B 6B-PH-SM3-TB
B 7B-PH-SM3-TB
B 8B-PH-SM3-TB
B 9B-PH-SM3-TB
B10B-PH-SM3-TB
B11B-PH-SM3-TB
B12B-PH-SM3-TB
B13B-PH-SM3-TB
B14B-PH-SM3-TB
B15B-PH-SM3-TB
B16B-PH-SM3-TB

S 2B-PH-SM3-TB
S 3B-PH-SM3-TB
S 4B-PH-SM3-TB
S 5B-PH-SM3-TB
S 6B-PH-SM3-TB
S 7B-PH-SM3-TB
S 8B-PH-SM3-TB
S 9B-PH-SM3-TB
S10B-PH-SM3-TB

–
S12B-PH-SM3-TB
S13B-PH-SM3-TB
S14B-PH-SM3-TB
S15B-PH-SM3-TB

–

2.0( .079)

4.0( .157)

6.0( .236)

8.0( .315)

10.0( .394)

12.0( .472)

14.0( .551)

16.0( .630)

18.0( .709)

20.0( .787)

22.0( .866)

24.0( .945)

26.0(1.024)

28.0(1.102)

30.0(1.181)

7.9( .311)

9.9( .390)

11.9( .469)

13.9( .547)

15.9( .626)

17.9( .705)

19.9( .783)

21.9( .862)

23.9( .941)

25.9(1.020)

27.9(1.098)

29.9(1.177)

31.9(1.256)

33.9(1.335)

35.9(1.413)

7.95( .313)

9.95( .392)

11.95( .470)

13.95( .549)

15.95( .628)

17.95( .707)

19.95( .785)

21.95( .864)

23.95( .943)

25.95(1.022)

27.95(1.100)

29.95(1.179)

31.95(1.258)

33.95(1.337)

35.95(1.415)

1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000

Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Nylon 46, UL94V-0, natural (white)
Solder tab: Brass, copper-undercoated, tin/lead-plated

Cir-

cuits

Model No.

Dimensions mm(in.)

Top entry

type

Side entry

type

Top entry type

Side entry type

A

B

Q'ty /

reel

Material and Finish

2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

B 2B-PH-SM4-TB
B 3B-PH-SM4-TB
B 4B-PH-SM4-TB
B 5B-PH-SM4-TB
B 6B-PH-SM4-TB
B 7B-PH-SM4-TB
B 8B-PH-SM4-TB
B 9B-PH-SM4-TB
B10B-PH-SM4-TB
B11B-PH-SM4-TB
B12B-PH-SM4-TB
B13B-PH-SM4-TB
B14B-PH-SM4-TB
B15B-PH-SM4-TB
B16B-PH-SM4-TB

S 2B-PH-SM4-TB
S 3B-PH-SM4-TB
S 4B-PH-SM4-TB
S 5B-PH-SM4-TB
S 6B-PH-SM4-TB
S 7B-PH-SM4-TB
S 8B-PH-SM4-TB
S 9B-PH-SM4-TB
S10B-PH-SM4-TB
S11B-PH-SM4-TB
S12B-PH-SM4-TB
S13B-PH-SM4-TB
S14B-PH-SM4-TB
S15B-PH-SM4-TB

–

2.0( .079)

4.0( .157)

6.0( .236)

8.0( .315)

10.0( .394)

12.0( .472)

14.0( .551)

16.0( .630)

18.0( .709)

20.0( .787)

22.0( .866)

24.0( .945)

26.0(1.024)

28.0(1.102)

30.0(1.181)

7.9( .311)

9.9( .390)

11.9( .469)

13.9( .547)

15.9( .626)

17.9( .705)

19.9( .783)

21.9( .862)

23.9( .941)

25.9(1.020)

27.9(1.098)

29.9(1.177)

31.9(1.256)

33.9(1.335)

–

7.95( .313)

9.95( .392)

11.95( .470)

13.95( .549)

15.95( .628)

17.95( .707)

19.95( .785)

21.95( .864)

23.95( .943)

25.95(1.022)

27.95(1.100)

29.95(1.179)

31.95(1.258)

33.95(1.337)

35.95(1.415)

1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000

Post: Copper alloy, copper-undercoated, tin-plated
Wafer: 6T nylon, UL94V-0, natural (white)
Solder tab: Brass, nickel-undercoated, tin/copper alloy-plated

Note: Contact JST for the top entry type headers with suction cap.

Note: Contact JST for the top entry type headers with suction cap.

PH CONNECTOR

<For reference> As the color identification,

the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.

ex. B2B-PH-SM3-oo-TB

(blank)…natural (white)
R…red E…blue M…green L…lemon yellow K…black

52

PH CONNECTOR

Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––

Feeding direction

(

+.098

- .039

[13(.512)dia.]

W1

+ 2.5

- 1.0

)

380± 2.0(14.961± .079)dia.

2.0±0.5

(.079± .020)

F±0.1

(.004)

W±0.3(.012)

4.0±0.1

(.157±.004)

Feeding direction

1.75±0.1
(.069±.004)

2.0±0.1

(.079±.004)

1.55±0.05
(.061±

.002)dia.

12.0±0.1

(.472±.004)

Cover tape

Carrier tape

4.0±0.1

(.157±.004)

2.0±0.1

(.079±.004)

12.0±0.1

(.472±.004)

Feeding direction

1.55±0.05
(.061±

.002)dia.

F±0.1

(.004)

W±

0.3(.012)

1.75±0.1
(.069±

.004)

S±

0.1(.004)

Cover tape

Carrier tape

F±0.1

(.004)

W±0.3(.012)

4.0±0.1

(.157±.004)

1.75±0.1
(.069±.004)

2.0±0.1

(.079±.004)

12.0±0.1

(.472±.004)

1.55±0.05
(.061±.002)dia.

Feeding direction

Cover tape

Carrier tape

4.0±0.1

(.157±

.004)

2.0±0.1

(.079±.004)

12.0±0.1

(.472±.004)

Feeding direction

1.55±0.05
(.061±

.002)dia.

F±0.1

(.004)

W±

0.3(.012)

1.75±0.1

(.069±

.004)

S±

0.1(.004)

Carrier tape

Cover tape

Feeding direction

Cover tape leaderCarrier tape

The end
part 160
(6.299)min.

Connector
mounting part

400(15.748)min.

Leader part

100(3.937)min.

Top entry type

(2 to 6 circuits)

Top entry type

(7 to 16 circuits)

Note:

1. Specifications conform to JIS C 0806. The tape width, connector
loading recess square hole dimensions, etc. are determined by the
number of circuits and external shape of the connector to be loaded.

2. Specifications are subject to change without prior notice.

17.5( .689)

25.5(1.004)

33.5(1.319)

45.5(1.791)

57.5(2.264)

17.5( .689)

25.5(1.004)

33.5(1.319)

45.5(1.791)

57.5(2.264)

1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000

FSWW1

16.0( .630)

24.0( .945)

32.0(1.260)

44.0(1.732)

56.0(2.205)

16.0( .630)

24.0( .945)

32.0(1.260)

44.0(1.732)

56.0(2.205)

–
–

28.4(1.118)

40.4(1.591)

52.4(2.063)
–
–

28.4(1.118)

40.4(1.591)

52.4(2.063)

7.5( .295)

11.5( .453)

14.2( .559)

20.2( .795)

26.2(1.031)

7.5( .295)

11.5( .453)

14.2( .559)

20.2( .795)

26.2(1.031)

2 to 3
4 to 6

7 to 9
10 to 14
15 to 16

2 to 3

4 to 6

7 to 9
10 to 14

15

Circuits

Taping dimensions mm(in.)

Q'ty /

reel

Reel dimensions

mm(in.)

Top entry

type

Side entry

type

Side entry type

(2 to 6 circuits)

Side entry type

(7 to 15 circuits)

53

SMT type PC board layout (viewed from component side) and Assembly layout –––––––––

1.6±0.1

(.063±.004)

1.6±0.1

(.063±.004)

2.0±0.05

(.079±.002)

1.0
(.039)

3.0±0.1

(.118

±

.004)

1.0

min.

(.039)

End face of wafer
on the mating side

7.5(.295)min.

max.2.0(.079)

5.0(.197) [2.0(.079)]

8.6(.339)

6.6(.260)

max.

9.0(.354)min.

(.039)

3.4±0.1

(.134

±

.004)

0.2
(.008)

1.5±0.1

(.059±.004)

1.6±0.1

(.063±.004)

2.0±0.05

(.079±.002)

End face of wafer
on the mating side

1.0

min.

5.5(.217)

7.6(.299)

9.6(.378) 1.0(.039)

5.5(.217)

SM3, SM4 type

Side entry type

Top entry type

Note:

1. Tolerances are non-cumulative:

±

0.05mm(±.002" ) for all centers.

2. The dimensions above should serve as a guideline. Contact JST for details.

PH CONNECTOR

Contact

Crimp applicator MKS-L(-10) Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC

with safety cover without safety cover with safety cover without safety cover with safety cover

Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––

SPH-002T-P0.5S

APLMK SPH002-05S APLNC SPH002-05S APLMKLS SPH002-05S APLLSNC SPH002-05S APLSC SPH002-05S

SPH-004T-P0.5S

APLMK SPH004-05S APLNC SPH004-05S ––APLSC SPH004-05S

SPH-002T-P0.5L

APLMK SPH002-05L APLNC SPH002-05L APLMKLS SPH002-05L APLLSNC SPH002-05L APLSC SPH002-05L