18
3
3
PUSH
This ACH connector is compact and low
profile type, height: 1.4mm (.055") and
width 4.3mm (.169"), 1.2mm (.047") pitch
wire-to-board connector.
Features––––––––––––––––––––––––
• Top entry but side feed type
Wires come out from horizontal direction of connector
a Low profile {height: 1.4mm (.055")}
Socket is mated with header from vertical direction of connector
a Excellent workability
• Connector for DC power supply
In spite of compact and low profile type connector, rated current
is 2A for both 2-circuit and 3-circuit with wire size AWG #28.
• Corresponding to sucking nozzle of pick and
place machine
A sucking area on bottom of inside header is available.
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #28)
• Voltage rating: 50V AC, DC
• Temperature range:
-25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 100M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: AWG #30 to #28
Insulation O.D./0.5 to 0.63mm (.020" to .025")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0
Recognized E60389
ACH CONNECTOR
Disconnectable Crimp style connectors
1.2mm
(.047") pitch
Crimp
Emboss Tape
19
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.2(.047)1.45(.057)
0.7(.028)
0.8(.031)
0.6(.024)
2.95(.116)
Model No.
Insulation O.D. mm(in.)
Applicable wire
Q'ty / reel
AWG#
30 to 28
Material and Finish
Copper alloy, nickel-undercoated, gold-plated
mm
2
0.05
to
0.08
SACH-003G-P0.2
0.5 to 0.63(.020 to .025) 30,000
ACH CONNECTOR
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. ACHR-02V-00
-
S…natural (white)
K…black
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. BM02B-ACHSS-GAN-TF-
S…natural (ivory)
Model No.
ACHR-02V-S
ACHR-03V-S
Material
PBT, UL94V-0, natural (white)
Circuit No.1 mark
A
B
3
1.2(.047)
3.5(.138)
PUSH
0.3(.012)
Circuits
2
3
Dimensions mm(in.)
AB
1.2(.047)
2.4(.094)
2.6(.102)
3.8(.150)
Q'ty
/ bag
1,000
1,000
1.2(.047)
Circuit No.1 mark
Circuits
2
3
Model No.
BM02B-ACHSS-GAN-TF
BM03B-ACHSS-GAN-TF
Q'ty / reel
4,500
4,500
Material and Finish
A
B
1.2(.047)
3
Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe)
Housing: Heat resisting resin, UL94V-0, natural (ivory)
Solder tab: Copper alloy, copper-undercoated, tin-plated
4.3(.169)
1.4(.055)
1.4(.055)
4.3(.169)
20
ACH CONNECTOR
2
3
Circuits
W1
12.0(.472)
16.0(.630)
F
W
5.5(.217)
7.5(.295)
13.5(.531)
17.5(.689)
Dimensions mm(in.)
Reel dimensions mm(in.)
Q'ty /
reel
4,500
4,500
Feeding direction
Cover tape
Carrier tape
Feeding direction
[13(.512)dia.]
Feeding direction
Cover tape leaderCarrier tape
The end part
160(6.299)min.
Connector
mounting part
400(15.748)min.
Leader part
100(3.937)min.
380±2.0(14.961±.079)dia.
2.0±0.5(.079±.020)
-1.0 -.039W1
+2.5 +.098
( )
F±0.1(.004)
W±0.3(.012)
1.75±0.1
(.069±.004)
8.0±0.1
(.315±.004)
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
1.55±0.05
(.061±.002)dia.
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Note:
1. Specifications conform to JIS C 0806. The tape width, connector loading
recess square hole dimensions, etc. are determined by the number of circuits
and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
PC board layout (viewed from component side) and Assembly layout––––––––––––––––––
Note: 1. Tolerances are non-cumulative: ±0.05mm (±.002") for all centers.
Note: 2. The dimensions above should serve as a guideline. Contact JST for details.
Header outline
2 circuits: 1.2±0.05
(.047±.002)
3 circuits: 2.4±0.05
(.094±.002)
0.8±0.05(.031±.002)
1.2±0.05
0.8±0.05(.031±.002)
3.75±0.05(.148±.002)
0.7(.028)min.
(.047±.002)
0.6(.024)min.
0.85(.033)
min.
21
ACH CONNECTOR
Contact
Crimp applicator MKS-L-10-3 Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
SACH-003G-P0.2
APLMK SACH003-02 APLNC SACH003-02 –– –
Loading...