JSI SWISH Installation Instructions Manual

Installation Instructions
Page 1 of 2
Recommended Tools
Hardware Used
• #8x 1-1/4” Pan Head
Wood Screws
Level Bench Height Storage Units
• Position storage units in desired location.
• Level all storage units front-to-back and side-to-side by rotating adjustable glides.
• Storage units that share same bench top are to be adjusted to same height.
Modular Bench Top
#2 Phillips Head
Position Bench Top onto Storage Units
• Place bench top face down on flat, smooth, soft floor, as not to scratch/mar surface.
• Remove shelves and/or drawers from storage units.
• Carefully flip storage units upside down and place onto bench top. Position units flush with back and ends of bench top.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231 Jasper, Indiana 47546
Form No. INST-10010
Installation Instructions
Page 2 of 2
Attach Bench Top to Storage Units
• Fasten units to top using factory predrilled holes, #8 x 1-1/4”pan head wood screws.
Flush
to back
Flush to end
Attach Bench Ganging Brackets
• Secure bench storage units together using two brackets and #8 x 5/8”pan head wood screws.
• Carefully flip unit to upright position and level.
Modular Bench Top
(continued)
Flush to end
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231 Jasper, Indiana 47546
Form No. INST-10010
Loading...