jsfdrones Venom 4 Instruction manual

• Intelligent R/C System

• Smooth ight performance

• The four-motor drive gives stable ight.

• The Venom can complete several manoeuvres.

• A 6-axis gyro and integrated altitude control ensures ne control in the air.

Please read the instructions carefully before use.

Please keep the instructions for future reference.

4 CH 2.4G CONTROL WITH SIX AXIS GYRO

VENOM

TY5629

NO.TY5629 2.4G main technical index

VENOM : L:172mm x W:172mm x H:38mm

Fuselage weight: 36 g

Flight range: 30 M

Charging time: Approx 40-50 mins

Flying time: Approx 6-8 mins

VENOM MAIN TECHNICAL INDEX

Using Battery/Charger

1. Venom’s battery (built in): 3.7V/300 mAh Li-poly

2. Remote controller battery: 4 x 1.5”AA”(LR6) (Not included)

2.4G REMOTE CONTROLLER INSTRUCTION

ASSEMBLY R/C BATTERY INSTRUCTION

1. To install batteries: open the cover of
battery case. (Pic1)

2. Place 4 x 1.5 “AA” (LR6) Alkaline batteries
into the box with correct polarity
orientation. (batteries not included). (Pic 2)

3. Close the battery cover.

(Pic1) (Pic2)

Tips: When the power indicator of the remote control flashes, replace the battery as per the above

Notes:
Install or replace the batteries under adult supervision.
Retain the instructions for future reference.

ATTENTION! Non-rechargeable batteries are not to be charged. Rechargeable batteries

are only to be charged under adult supervision. Rechargeable batteries are to be
removed from the toy before being charged. Different types of batteries or new and
used batteries are not to be mixed. Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the toy. The supply terminals are not to be
short-circuited. RECYCLING BATTERIES, WASTE ELECTRICAL and ELECTRONIC EQUIPMENT:
Dispose of old batteries promptly and properly. Do not burn or bury them. Help the
environment, dispose of batteries and electrical products responsibly. Batteries must not be
disposed of in domestic waste as they can contain substances which can be damaging to
the environment and health. Please contact your local authority for designated collection
points or recycling facility.

Tail Blade Replacement:

1. If a blade needs to be replaced,
it is important to make sure that the
same type of blade is used. Only
replace type A blades with other
type A, and type B with type B.

2. The blade types spin in opposite
directions. Tail blade A spins
anti-clockwise, B spins clockwise.

VENOM

WARNING: Do not pierce the lithium-poly battery.