Thank you for purchasing the J-SCALE® JZ pocket scale. Please read all operating
instructions carefully before use. This electronic scale is a precision instrument.
With normal care and proper treatment, it will provide years of reliable service.
OPERATION
1. Place the scale on a horizontal at surface, press [ ] key to turn on the
scale. Hold [ ] for 3 seconds to turn o.
2. Wait until “0” is displayed.
3. Place the object(s) on the weighing platform.
4. Press [M] key to toggle the weighing units.
TARE
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [ ] and wait until "0" is displayed.
4. Add the "net-weight-item”.
5. Press [ ] again to return the scale to zero.
ENGLISH
USER MANUAL
Precision
0.1g
0.01oz
0.01ozt
0.1dwt
Capacity
560g
19.75oz
18ozt
360.1dwt
Precision
0.1g
0.01oz
0.01ozt
0.1dwt
Capacity
230g
8.12oz
7.4ozt
147.9dwt
Precision
0.01g
0.001oz
0.001ozt
0.01dwt
Capacity
115g
4.06oz
3.7ozt
73.9dwt
CALIBRATION: The JZ-115 requires a 100g weight to calibrate.
1. Ensure the scale is o and place on a stable surface.
2. Press and hold [M] and [ ] button. Release when the display shows “CAL”
and the AD value (a series of random numbers).
3. Press [ ] again, the LCD display will ash the required calibration weight.
4. Place the required calibration weigh on the tray and wait 3 seconds. The display
will show “PASS”.
5. Calibration is complete. Remove the weight and continue.
The JZ-230 requires a 200g and JZ-560 requires a 500g weight to calibrate.
1. Ensure the scale is o and place on a stable surface.
2. Press and hold [M] and [ ] button . Release when the display shows the
AD value (a series of random numbers).
3. Press [ ] again, the LCD display will show “CAL” then the required calibration weight.
4. Place the required calibration weight on the tray and press [ ]. The display
will show “PASS”.
5. Calibration is complete. Remove the weight and continue.
SPECIFICATIONS
Tare Range Full Capacity
Op. Temp 10 to 30 ºC
Power 2 x AAA
Scale Dim. 88mm x 60mm x 20mm
Tray 50mm x 55mm
Modes g, oz, ozt, dwt
DISPLAY ERROR MESSAGES
[88888] Overload
[OUT2] Recalibrate
Loading...