FA-G41A
PICMG 1.0 with Intel® G41
TM
support LGA775 Intel® Core2
Quad CPU Card With VGA, DDR3,
Dual PCIe GbE, SATA II, COM, USB 2.0
and Audio
User's Manual (V1.0)
健昇科技股份有限公司
JS AUTOMATION CORP.
新北市汐止區中興路 100 號 6 樓
6F., No.100, Zhongxing Rd.,
Xizhi Dist., New Taipei City, Taiwan
TEL：+886-2-2647-6936
FAX：+886-2-2647-6940
http://www.automation.com.tw
http://www.automation-js.com/
E-mail：control.cards@automation.com.tw
Contents
1. Forward ................................................................................................................................................ 2
2. Features ................................................................................................................................................ 3
3. Specifications ....................................................................................................................................... 4
4. Dimensions .......................................................................................................................................... 5
5. Jumper and Connector Locations ........................................................................................................ 6
5.1 FA-G41A Layout ......................................................................................................................... 6
5.2 Peripheral Interface Connectors................................................................................................... 7
5.3 External Interface Panel Connectors............................................................................................ 7
6. Connector and Jumper setting.............................................................................................................. 8
6.1 Peripheral Interface Connectors................................................................................................... 8
6.1.1 ATX Power Control Connector................................................................................................ 8
6.1.2 Audio Kit Connector ................................................................................................................ 8
6.1.3 Battery Connector .................................................................................................................... 8
6.1.4 CPU Fan Connector ................................................................................................................. 9
6.1.5 CPU Power Input Connector ................................................................................................... 9
6.1.6 DVI Connector ......................................................................................................................... 9
6.1.7 Digital I/O Connector ............................................................................................................ 10
6.1.8 Floppy Disk Connector .......................................................................................................... 10
6.1.9 Front Panel Connector ........................................................................................................... 11
6.1.10 Infrared Interface Connector .............................................................................................. 11
6.1.11 Keyboard Connector .......................................................................................................... 11
6.1.12 Memory Slot ...................................................................................................................... 12
6.1.13 IDE Connector ................................................................................................................... 12
6.1.14 Parallel Port Connector ...................................................................................................... 13
6.1.15 SATA Drive Connectors ..................................................................................................... 13
6.1.16 Serial Port Connector ......................................................................................................... 14
6.1.17 SPI Flash Connector .......................................................................................................... 14
6.1.18 USB Connectors ................................................................................................................ 14
6.2 External Interface Connector ..................................................................................................... 15
6.2.1 Keyboard/Mouse Connector .................................................................................................. 15
6.2.2 LAN Connectors .................................................................................................................... 15
6.2.3 USB Connector ...................................................................................................................... 16
6.2.4 VGA Connector ..................................................................................................................... 16
7. Ordering information ......................................................................................................................... 17
1
1. Forward
Thank you for your selection of FA-G41A cpu card.
Any comment is welcome,
please visit our website:
www.automation.com.tw
for the up to date information.
2
2. Features
PCIMG 1.0
RoHS compliant
LGA775 CPU socket
Supports two DDR3 DIMMs
Two Gigabit Ethernet connectors
Four SATA connectors
High Definition audio to connect to an optional audio kit
3
3. Specifications
Form Factor : PCIMG 1.0
CPU Supported : Socket LGA775 Intel® Core™2 Duo/Quad/Extreme, Celeron Front Side Bus
(FSB) : 800/1066/1333 MHz
Front Side Bus (FSB) : 800/1066/1333 MHz
Northbridge Chipset : Intel® G41
Integrated Graphics : GA DVI (FA-G41A-DVI only)
Memory : Two DDR3 modules up to 2 GB each (4 GB total)
Southbridge Chipset : Intel® ICH7
BIOS : AMI BIOS
Digital I/O : 8-bit, 4-bit input/4-bit output
Ethernet Controllers : Dual Realtek RTL8111CP
Super I/O Controller : iTE IT8718F
Watchdog Timer : Software programmable supports 1~255 sec. system reset
Audio Connectors : One internal audio connector
Keyboard/Mouse : One external PS/2, one internal pin header
Serial Ports : Two RS-232 COM connectors
USB 2.0/1.1 ports : Six internal via pin header One external
Floppy Disk Drives : One floppy disk drive (FDD) connector
IDE : One IDE connector
Serial ATA : Four independent SATA channels with 3.0 Gb/s data transfer rates
Environmental and Power Specifications
Power Supply : ATX power supported
Power Consumption : 5 V @ 7.13 A 12 V @ 0.27 A 5VBS @ 0.11 A Vcore @ 3.02 A
3D Mark2001SE with Intel® Core™2 Duo E8500 3.16GHz
and two 2GB DDR3 modules
Operating temperature : 0ºC ~ 60ºC( 32°F ~ 140°F), requires cooler and silicone heat sink paste
Humidity : 5% ~ 95% (non-condensing)
Physical Specifications
Dimensions : 338 mm x 122 mm
Weight GW : 1100 g
4
4. Dimensions
5
5. Jumper and Connector Locations
5.1 FA-G41A Layout
6
5.2 Peripheral Interface Connectors
Connector
Type
Label
ATX Power Control Connector
3-pin wafer (1x3)
ATXCTL1
Audio Kit Connector
10-pin header
J_AUDIO1
Battery Connector
2-pin wafer (1x2)
BAT1
CPU Fan Connector
4-pin header
CPU_FAN1
CPU Power Input Connector
4-pin connector
CPU12V1
DVI Connector
26-pin header
DVI1
Digital I/O Connector
10-pin header
DIO1
Floppy Disk Connector
34-pin header
FDD1
Front Panel Connector
14-pin header
F_PANEL1
Infrared Interface Connector
5-pin header (1x5)
IR1
Keyboard Connector
5-pin header (1x5)
KB1
Memory Slot
DIMM slot
DIMM1, DIMM2
IDE Connector
40-pin box header
PIDE1
Parallel Port Connector
26-pin box header
LPT1
SATA Drive Connectors
7-pin SATA drive
connectors
SATA1, SATA2, SATA3,
SATA4
Serial Port Connector
10-pin box header
COM1, COM2
SPI Flash Connector
8-pin header
JSPI1
USB Connectors
8-pin header
USB1
Connector
Type
Label
Keyboard/Mouse Connector
PS/2
KB_MS1
LAN Connector
RJ-45
LAN1, LAN2
USB Connector
USB port
USB_C1
VGA Connector
15-pin Female
VGA1
5.3 External Interface Panel Connectors
7
6. Connector and Jumper setting
Pin
Description
1
GND
2
ATX_ON
3
5VSB
Pin
Description
Pin
Description
1
ACZ_SYNC
2
ACZ_BITCLK
3
ACZ_SDOUT
4
ACZ_PCBEEP
5
ACZ_SDIN
6
ACZ_RST#
7
ACZ_VCC
8
ACZ_GND
9
ACZ_12 V
10
ACZ_ GND
Pin
Description
1
Battery+
2
Ground
6.1 Peripheral Interface Connectors
6.1.1 ATX Power Control Connector
(ATXCTL1 : 3-pin wafer (1x3))
The connector is for enabling an ATX power supply. When connected to the power supply,
the power can be turned on and off with the front panel switch.
6.1.2 Audio Kit Connector
(J_AUDIO1: 10-pin header)
This connector connects to an external audio kit.
6.1.3 Battery Connector
(BAT1: 2-pin wafer (1x2))
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.
8
6.1.4 CPU Fan Connector
Pin
Description
1
GND
2
+12 V
3
Rotation signal
4
Control
Pin
Description
1
GND
2
GND
3
+12 V
4
+12 V
Pin
Description
Pin
Description
1
Data 2
14
VCC
2
Data 2+
15
GND
3
GND
16
Hot Plug Detect
4
N/C
17
Data0
5
N/C
18
Data 0+
6
DDC Clock
19
GND
7
DDC Data
20
N/C
8
N/C
21
N/C
9
Data 1
22
GND
10
Data 1+
23
Clock+
11
GND
24
Clock
12
N/C
25
GND
13
N/C
26
(CPU_FAN1: 4-pin header)
The fan connector attaches to a CPU cooling fan.
6.1.5 CPU Power Input Connector
(CPU12V1: 4-pin connector)
The CPU power input connector provides power to the CPU.
6.1.6 DVI Connector
(DVI1: 26-pin header)
The DVI connector connects to a monitor that supports DVI video input.
9
6.1.7 Digital I/O Connector
Pin
Description
Pin
Description
1
GND
2
VCC
3
Output 3
4
Output 2
5
Output 1
6
Output 0
7
Input 3
8
Input 2
9
Input 1
10
Input 0
Pin
Description
Pin
Description
1
GND
2
REDUCE WRITE
3
GND 4 N/C
5
N/C 6 N/C
7
GND 8 INDEX#
9
GND
10
MOTOR ENABLE A#
11
GND
12
DRIVE SELECT B#
13
GND
14
DRIVE SELECT A#
15
GND
16
MOTOR ENABLE B#
17
GND
18
DIRECTION#
19
GND
20
STEP#
21
GND
22
WRITE DATA#
23
GND
24
WRITE GATE#
25
GND
26
TRACK 0#
27
GND
28
WRITE PROTECT#
29
GND
30
READ DATA#
31
GND
32
SIDE 1 SELECT#
33
GND
34
DISK CHANGE#
(DIO1: 10-pin header)
The digital I/O connector provides programmable input and output for external devices. The
digital I/O provides 4-bit output and 4-bit input.
6.1.8 Floppy Disk Connector
(FDD1: 34-pin header)
The floppy disk connector is connected to a floppy disk drive.
10
6.1.9 Front Panel Connector
Pin
Description
Pin
Description
1
+5 V
2
+5 V
3
N/C
4
N/C
5
GROUND
6
N/C
7
Power button+
8
Speaker
9
Power button-
10
N/C
11
+5 V
12
Reset
13
HDD LED
14
GROUND
Pin
Description
1
VCC
2
NC
3
IR-RX
4
GND
5
IR-TX
Pin
Description
1
KEYBOARD CLOCK
2
KEYBOARD DATA
3
N/C
4
GROUND
5
VCC
(F_PANEL1: 14-pin header)
The front panel connector connects to the indicator LEDs and buttons on the computer's
front panel.
6.1.10 Infrared Interface Connector
(IR1: 5-pin header (1x5))
The infrared connector attaches to an infrared receiver for use with remote controls.
6.1.11 Keyboard Connector
(KB1: 5-pin header (1x5))
The keyboard connector can be used to install a PS/2 keyboard.
11
6.1.12 Memory Slot
Pin
Description
Pin
Description
1
RESET#
2
GROUND
3
DATA 7
4
DATA 8
5
DATA 6
6
DATA 9
7
DATA 5
8
DATA 10
9
DATA 4
10
DATA 11
11
DATA 3
12
DATA 12
13
DATA 2
14
DATA 13
15
DATA 1
16
DATA 14
17
DATA 0
18
DATA 15
19
GROUND
20
N/C
21
IDE DRQ
22
GROUND
23
IOW#
24
GROUND
25
IOR#
26
GROUND
27
IDE CHRDY
28
BALE—DEFAULT
29
IDE DACK
30
GROUND
31
INTERRUPT
32
N/C
33
SA1
34
PDIAG#
35
SA0
36
SA2
37
HDC CS0#
38
HDC CS1#
39
HDD ACTIVE#
40
GROUND
(DIMM1, DIMM2 : DIMM slot)
The DIMM slots are for DIMM memory modules.
6.1.13 IDE Connector
(PIDE1: 40-pin box header)
Connects to IDE hard drives and optical drives.
12
6.1.14 Parallel Port Connector
Pin
Description
Pin
Description
1
STROBE#
14
AUTO FORM FEED#
2
DATA0
15
ERROR#
3
DATA1
16
INITIALIZE#
4
DATA2
17
PRINTER SELECT LN#
5
DATA3
18
GROUND
6
DATA4
19
GROUND
7
DATA5
20
GROUND
8
DATA6
21
GROUND
9
DATA7
22
GROUND
10
ACKNOWLEDGE#
23
GROUND
11
BUSY
24
GROUND
12
PAPER EMPTY
25
GROUND
13
PRINTER SELECT
Pin
Description
1
GND
2
TX+
3
TX
4
GND
5
RX
6
RX+
7
GND
8
N/C
(LPT1: 26-pin box header)
The parallel port connector connects to a parallel port connector interface or some other
parallel port device such as a printer.
6.1.15 SATA Drive Connectors
(SATA1, SATA2, SATA3, SATA4 : 7-pin SATA drive connectors)
The SATA drive connectors can be connected to SATA drives.
13
6.1.16 Serial Port Connector
Pin
Description
1
Data Carrier Detect (DCD1)
2
Receive Data (RXD1)
3
Transmit Data (TXD1)
4
Data Terminal Ready (DTR1)
5
Ground (GND1)
6
Data Set Ready (DSR1)
7
Request To Send (RTS1)
8
Clear To Send (CTS1)
9
Ring Indicator (RI1)
10
NC
Pin
Description
Pin
Description
1
VCC
2
GND
3
CS#
4
CLOCK
5
SO 6 SI 7 NC 8 NC
Pin
Description
Pin
Description
1
VCC
2
GND
3
DATA1
4
DATA+
5
DATA1+
6
DATA
7
GND
8
VCC
(COM1, COM2: 10-pin box header)
This connector provides RS-232 communications.
6.1.17 SPI Flash Connector
(JSPI1: 8-pin header)
The 8-pin SPI Flash connector is used to flash the BIOS.
6.1.18 USB Connectors
(USB12, USB34, USB56: 8-pin header)
The USB connectors connect to USB devices. Each pin header provides two USB ports.
14
6.2 External Interface Connector
Pin
Description
1
KEYBOARD DATA
2
MOUSE DATA
3
GROUND
4
VCC
5
KEYBOARD CLOCK
6
MOUSE CLOCK
Pin
Description
Pin
Description
1
MDIA3
5
MDIA1+
2
MDIA3+
6
MDIA+
3
MDIA2
7
MDIA0
4
MDIA1
8
MDIA0+
6.2.1 Keyboard/Mouse Connector
(KBMS1 : PS/2)
The keyboard and mouse connector is a standard PS/2 connector.
6.2.2 LAN Connectors
(LAN1, LAN2: RJ-45)
The LAN connector connects to a local network.
15
6.2.3 USB Connector
Pin
Description
Pin
Description
1
VCC
2
DATA
3
DATA+
4
GROUND
Pin
Description
Pin
Description
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
GND
7
GND
8
GND
9
VCC
10
GND
11
NC
12
DDC DAT
13
HSYNC
14
VSYNC
15
DDCCLK
(USB_C1: USB port)
The USB connector can be connected to a USB device..
6.2.4 VGA Connector
(VGA1 : 15-pin Female)
The VGA connector connects to a monitor that accepts a standard VGA input.
16
7. Ordering information
PRODUCT
DESCRIPTIONS
JD50FAG41A
PICMG 1.0 with Intel® G41 support LGA775 Intel® Core2TM Quad CPU
Card With VGA, DDR3, Dual PCIe GbE, SATA II, COM, USB 2.0 and
Audio
17
Loading...