JS Automation AIO-3310, AIO-3311, AIO-3312 User Manual

AIO-3310/1/2

ANALOG INPUT AND

MULTI-FUNCTION DIGITAL I/O CARD

USER'S MANUAL (V1.0)

健昇科技股份有限公司

JS AUTOMATION CORP.

台北縣汐止市㆗興路

100號6

樓

6F,NO.100,CHUNG-SHIN RD.

SHI-TSU,TAIPEI,TAIWAN,R.O.C.

TEL：[phone]

FAX：[phone]
http://www.automation.com.tw

E-mail：[e-mail]

[e-mail]

Export: [e-mail]

1

Contents

1. FORWARD...................................................................................................................................2

2. PACKING LIST ...........................................................................................................................2

3. FEATURES...................................................................................................................................3

3.1 MAIN CARD .........................................................................................................................3

3.2. DIN RAIL MOUNTED WIRING BOARD...........................................................................3

4. SPECIFICATIONS ......................................................................................................................4

4.1. AIO-3310 MAIN CARD........................................................................................................4

4.2. AIO-3310 WIRING BOARD.................................................................................................4

5. LAYOUT AND DIMENSIONS...................................................................................................5

5.1. AIO3310/1/2 MAIN CARD LAYOUT..................................................................................5

6. PIN DEFINITIONS......................................................................................................................6

6.1. PIN DEFINITIONS FOR ON CARD 37P CONNECTOR...................................................6

6.2. PIN DEFINITIONS FOR EXTENSION 37P CONNECTOR...............................................7

7. HARDWARE DESCRIPTIONS.................................................................................................8

7.1. CARD ID SETTING..............................................................................................................8

7.2. DIGITAL I/O..........................................................................................................................8

7.3. TIMER/COUNTER

................................................................................................................8

7.4. ANALOG INPUT

...................................................................................................................8

8. APPLICATIONS..........................................................................................................................9

9. ORDER INFORMATION.........................................................................................................10

2

1.

FORWARD

Thank you for your selection of our PCI bus AIO-3310/1/2 a multi-channel analog input, and
multi-function digital i/o and timer/counter card.
An analog input card maybe as simply as just signal conversion, and the calibration job will be
the burden of the users. AIO-3310 provides a new approach that each channel has been calibrated
with our precision instruments and all the records kept in the on-card eeprom to give the users a
transparent environment of accurate result at lo w card price.
Except for the calibration features, 2 byte-wide programmable TTL i/o ports also give users more
flexible functions to integrate the whole system.

Two 32bit Timer/counter ports also provide you versatile functions such as: programmable
one-shot, rate generator, square wave generator, software/hardware triggered strobe, event
timer/counter, triggered timer/counter, PWM generator, ….

Wish you would enjoy this card!

Other analog i/o

card:
AIO-9201 ISA bus, 8 differential /16 single end 12bit analog input, 2 12bit analog output card
AIO-3310 PCI bus, 8 single/differential 12 bit analog input, 16 TTL i/o card
AIO-3311 PCI bus, 16 single/differential 12 bit analog input, 16 TTL i/o card
AIO-3312 PCI bus, 24 single/differential 12 bit analog input, 16 TTL i/o card

Any comment is welcome,
please visit our website:

www.automation.com.tw

for the up to date information.

2.

PACKING LIST

2.1 AIO-3310 MAIN CARD 1

2.2 MANUAL CD 1

2.3 DIN RAIL MOUNTED WIRING BOARD 1
(1 wiring board for AIO-3310, and 2 wiring boards for AIO-3311,3312)

2.4 D-TYPE 37 PIN CABLE(1.5m) 1
(1 cable for AIO-3310, and 2 cables for AIO-3311,3312)

2.5 Extension kit 1
(for AIO-3311,3312 only)

3

3.

FEATURES

3.1 MAIN CARD

General:

3.1.1 PCI plug and play function

with card ID for 16 identical cards

3.1.2 Security password blocks illegal copy of software

Analog function:

3.1.3. 8/16/24 channel 12bit analog inputs (standard:8 channels)

3.1.4. Software selectable input range:

-10V~ +10V, -5V~ +5V , 0~10V, 0~5V

3.1.5. Factory pre-calibrated analog conversion accuracy

Digital I/O function:

3.1.6. 2 byte-wide programmable TTL i/o

3.1.7. IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of timer/counter

function

Timer/Counter function:

3.1.8. 2 32bit multifunction counters up to 33MHz

3.1.9. multi-function:

- programmable one-shot

- square wave generator

- event counter

- PWM generator

3.2. DIN RAIL MOUNTED WIRING BOARD

3.2.1. 37 pin D-type connector to wiring terminals

4

4. SPECIFICATIONS

4.1. AIO-3310 MAIN CARD

General:

4.1.1. PCI data width ― 32 Bits

4.1.2. Card ID ― 4 bits

4.1.3. Security password ― 10 bytes, user configurable

4.1.4. Interrupt ― software disable/enable

4.1.5. Dimension ― 150(W)*106(H)mm

Analog block:

4.1.6. input channels ― 8/16/24 channel single end or differential

(standard:8 channels)

4.1.7. resolution ― 12bit

4.1.8. input range ― -10V~ +10V, -5V~ +5V , 0~10V, 0~5V

4.1.9. range selection ― software selectable per chip

4.1.10. conversion speed ― 6us per chip (8 channel per chip)

4.1.11. accuracy ― full range within 5mV (after calibration)

Digital I/O block:

4.1.12. i/o channels ―16 TTL (port0,port1)

4.1.13. configuration ― byte input /output

Timer/Counter block:

4.1.14. channels ―2

4.1.15. data length ― 32 bit

4.1.16. specific input ― trigger in/ counter in via digital i/o port0

4.1.17. specific output ― trigger out / counter out via digital i/o port 1

4.1.18. time base ― PCI system clock (33/66Mh)

4.1.19. functions ―

- programmable one-shot

- square wave generator

- event counter

- PWM generator

4.2. AIO-3310 WIRING BOARD

4.2.1. Connection cable ― D-type 37P cable to connect main and wiring board

4.2.2. Dimension ― 113(W)*85(H)mm

5

5. LAYOUT AND DIMENSIONS

5.1. AIO3310/1/2 MAIN CARD LAYOUT

Card ID

6

6. PIN DEFINITIONS

6.1. PIN DEFINITIONS FOR ON CARD 37P CONNECTOR

PIN

DESCRIPTIONS

PIN

DESCRIPTIONS

1 IO00: dio port0 bit0

trigger in of counter0

20 IO01: dio port0 bit1

trigger in of counter1

2 IO02: dio port0 bit2 21 IO03: dio port0 bit3
3 IO04: dio port0 bit4 22 IO05: dio port0 bit5
4 IO06: dio port0 bit6 23 IO07: dio port0 bit7
5 IO10: dio port1 bit0

trigger out of
counter0/timer0

24 IO11: dio port1 bit1

trigger out of
counter1/timer1

6 IO12: dio port1 bit2 25 IO13: dio port1 bit3
7 IO14: dio port1 bit4 26 IO15: dio port1 bit5
8 IO16: dio port1 bit6 27 IO17: dio port1 bit7

9 AI0+: analog in0+ 28 AI0-: analog in0­10 AI1+: analog in1+ 29 AI1-: analog in1­11 AI2+: analog in2+ 30 AI2-: analog in2­12 AI3+: analog in3+ 31 AI3-: analog in3­13 AI4+: analog in4+ 32 AI4-: analog in4­14 AI5+: analog in5+ 33 AI5-: analog in5­15 AI6+: analog in6+ 34 AI6-: analog in6­16 AI7+: analog in7+ 35 AI7-: analog in7­17 +5V (out) 36 GND
18 GND 37 -15V (out)
19 +15V (out)

Note:AI0~AI7 is on chip 1.

AI0+
AI1+
AI2+
AI3+
AI4+
AI5+
AI6+
AI7+

AI0­AI1­AI2­AI3­AI4­AI5­AI6­AI7-

DIO00

DIO01

DIO02

DIO03

DIO04

DIO05

DIO06

DIO07

DIO10

DIO11

DIO12

DIO13

DIO14

DIO15

DIO16

DIO17

+5V
GND

GND

-15Ve

+15Ve

1

20

2

21

3

22

4

23

5

24

6

25

7

26

8

27

9

28

10

29

11

30

12

31

13

32

14

33

15

34

16

35

17

36

18

37

19

7

6.2. PIN DEFINITIONS FOR EXTENSION 37P CONNECTOR

PIN

DESCRIPTIONS

PIN

DESCRIPTIONS
1 AI8+: analog in8+ 20 AI8-: analog in8­2 AI9+: analog in9+ 21 AI9-: analog in9­3 AI10+: analog in10+ 22 AI10-: analog in10­4 AI11+: analog in11+ 23 AI11-: analog in11­5 AI12+: analog in12+ 24 AI12-: analog in12­6 AI13+: analog in13+ 25 AI13-: analog in13­7 AI14+: analog in14+ 26 AI14-: analog in14­8 AI15+: analog in15+ 27 AI15-: analog in15­9 AI16+: analog in16+ 28 AI16-: analog in16-

10 AI17+: analog in17+ 29 AI17-: analog in17­11 AI18+: analog in18+ 30 AI18-: analog in18­12 AI19+: analog in19+ 31 AI19-: analog in19­13 AI20+: analog in20+ 32 AI20-: analog in20­14 AI21+: analog in21+ 33 AI21-: analog in21­15 AI22+: analog in22+ 34 AI22-: analog in22­16 AI23+: analog in23+ 35 AI23-: analog in23­17 +5V (out) 36 GND
18 GND 37 -15V (out)
19 +15V (out)

AI8+
AI9+
AI10+
AI11+
AI12+
AI13+
AI14+
AI15+
AI16+
AI17+
AI18+
AI19+
AI20+
AI21+
AI22+
AI23+
+5V
GND
+15Ve

AI8-

GND

-15Ve

AI9­AI10­AI11­AI12­AI13­AI14­AI15­AI16­AI17­AI18­AI19­AI20­AI21­AI22­AI23-

1

20

2

21

3

22

4

23

5

24

6

25

7

26

8

27

9

28

10

29

11

30

12

31

13

32

14

33

15

34

16

35

17

36

18

37

19

DB37PF

8

7. HARDWARE DESCRIPTIONS

7.1. CARD ID SETTING
Since PCI cards have plug and play function, the card ID is required for programmer

to identify which card he/she will control without knowing the physical address
assigned by the Windows (OS). A 16 position rotary switch for extinguishing the 16
identical card.

7.2. DIGITAL I/O
The 2 byte programmable TTL I/O can be used as input or output depend on your

configuration. But when you use the timer / counter trigger output mode the port1 is must
configure as output and bit0 is timer0/counter0 trigger out, bit1 is timer1/counter1 trigger
out.
If you use trigger input mode of counter the port0 must configure as input port and bit0
as counter0 input ,bit1 as counter1 input.

7.3. TIMER/COUNTER
There 2 timer/counter’s on board. Each one has 32 bit register length, if you program as

PWM mode, the register is divided as 2 16 bit width, the upper 16 bit work as the pulse
high width and the lower 16 bit wor k a s PWM frequency register . The card also provide
end of count interrupt function of both the tim er/counters.

7.4. ANALOG INPUT
There are maximum 24 channels of analog input on card, which are divided in 3 A/D

chips. Depends on your selection, 8/16/24 channels are available. The hardware may
accept 0-5V, 0-10V,-5V-+5V, -10V - +10V range on per chip basis.

9

8. APPLICATIONS

8.1. Analog section:
For measurement of analog signal such as:

- temperature

- voltage

- current

- flow

- light

- ....

Note: The analog signal should be pre-processed to the acceptable range of the card

.

8.2. Digital section:
For the control of digital i/o:

- switch input

- relay control

- trigger output

- ...

Note: The digital signal should be pre-processed to the TTL level

.

8.3. Counter/Timer section

- event counting

- periodic interrupt source

- PWM generator (can work as D/A with external low pass filter)

- counter/timer with trigger out

- duration counter

10

9. ORDER INFORMATION

PRODUCT DESCRIPTIONS
AIO-3310 8 channels analog input ,16 TTL i/o and multi function timer/counter card
AIO-3311 16 channels analog input ,16 TTL i/o and multi function timer/counter card
AIO-3312 24 channels analog input ,16 TTL i/o and multi function timer/counter card
M270337X0 D-type 37 pin 1.5M cable
JD50026

D-type 37P DIN rail wiring board

SM23403 Extension kit (for 3311/3312 only)