JRC NSVS1153 User Manual
NSVS1153 Nov. 2004
Application
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Maximum Rating: (Table 2)
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.0x3.0x1.15[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
314MHz R.K.E.
Table 1. Electrical Specifications
Item Spec. Typ.
Input and Output Impedance
Nominal Center Frequency (f0) 314MHz Insertion Loss 313.5~314.5MHz 3.0dB max. 2.0dB
Response Variation 313.5~314.5MHz 1.5dB max. 0.8dB
Input and Output VSWR 313.5~314.5MHz 2.5 max. 1.8
(Relative to Through Level)
Table 2. Maximum Ratings
Item Rating
Maximum Input Power +20dBm
Maximum DC Voltage 7.5V
Operating Temperature Range -40~+85ºC
Storage Temperature -45~+90ºC
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
JRC SAW FILTER
NSVS1153
50Ω
292.6 MHz 50dB min. 60dB Out of Band Rejection
335.4 MHz 40dB min. 45dB
(Operating Temperature Range: -40~+85ºC)
3
] for SMD (Surface Mount Device) type.
Communications Equipment Division
Communications Equipment Marketing Department
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
http://www.jrc.co.jp/eng/product/saw/index.html(English)
-
NSVS1153 Nov. 2004
IN
50Ω
1
2
34
SAW
6
5
OUT
50Ω
(a)
Fig.1 Measuring circuit
3. 0±0. 15
(b)
3. 0±0. 15
420
(c)
(1)
WM
(2)
1. 15±0. 15
(0.6)
(0.25)
3
2
(1.80)
1
(0.45)
Fig.2 Package dimensions (in mm)
0.93
(0.75)
[4x]
3.8
Marking
(1) Lot Number
(a) Year
(b) Month
*Oct.--- X
Nov.--- Y
Dec.--- Z
4
[2x]
(0.6)
5
6
[4x]
(0.53)
(c) Date
1-9--- 0
10-19--- 1
20-31--- 2
(2) Part Number Mark
Pin no. Connection
1 GND
2 IN/OUT
3 GND
4 GND
5 OUT/IN
6 GND
2.2
1.15
0.6
3.8
1.15
0.93
Fig.3 Desirable land area (in mm)
Loading...