Joy Technology T10 Users manual
Quick
The product can provide limited protection, and reduce tragedy to be occurred, but it's can ensure this perfectly safe. For your
When encounter danger, emergency issue, don't worry, press the big red button on the console(or T10 ), or press the button on
Be sure and user or test your system weekly.
I. Interface Description
1. HELP/Panic Button(Used to Power On, Dial Emergency Call)
2. Cancel Button (Used to Hang Up Call, Enter Menu Mode)
3. Speaker
4. LED Lamp
5. Microphone
6. Line
7. Telephone
8. DC Power Supply Port
9. Home/Away Button
Quick
Start
Start
Guide
Guide
Medical
Medical
Kindly And Important Warnings
safety, not only need well use this product, but also need guard every security issues occur in your daily life;
Pendant (or Panic Buttons), or Bedside Rock Button, to get help;
Top View:
Alert
Alert
System
System
T10
T10
3
Back View:
4 5 2 1
9 8 7 6
LED Lamp Indication:
1. Green: Normal standby / Everything fine
2. Green flash very slow: low battery standby
3. Green flash: calling
4. Green and red flash alternately: Detect Hardware Error, such as not plug adapter
5. Red flash quickly: No telephone line
6. Green and yellow flash shortly: Intrusion mode have enabled
7. Green flash quickly: Inactivity detect mode have enabled
8. White: wireless pare mode
9. Blue: Away mode is enable, and under normal standby
10. Blue flash very slow: Away mode is enable, and low battery standby
11. Blue and red flash alternately: Away mode is enable, and detect Hardware Error, such as not plug adapter
II.
II. Initial Operation and Installation
Step 1
Connect the Line port of the device to land line socket port
via an extend telephone wire.
Step 2
Connect the Telephone port of the device to normal
telephones via an extend telephone wire
Step 3
Plug the DC Adapter to the wall power socket.
Loading...