JOYTECH SL1000AC, SL1500AC User Manual

SL1000AC/SL1500AC
Sliding Gate Opener
User Manual
1
Dear users,
Thank you for choosing this product. Please read this manual carefully before installation and use.
Please do not forget to include this manual if you send the product to a third party.
1. Safety Instruction
(AC110V or AC220V); kids are not allowed to touch the control devices or the remote-control unit.
The remote-control unit is single button mode or three button mode (please refer to the instructions
of the remote control in accordance with the actual gate opener type). The indicator light on the
remote-control unit will flicker when its button is pressed. Main engine and gate can be unlocked
with a disengagement wrench and the gate can be manually operated after disengagement.
Please make sure that nobody is around the main engine or gate when the switch is operated.
Please temporarily stop using the product if the main engine needs to be repaired or regulated. The
installation and maintenance of the product must be carried out by professionals.
Please read this manual carefully before installing、using、maintaining or repairing it. Without
following this manual, any injury or property losses caused by improper use or unauthorized
modification is out of the responsibility of our company.
2
2. Packing List (standard)
No.
Picture
Name
Quantity
1
Main engine
1
2
Manual release key
2
3
A
B
C
D
A
B
C
D
Remote control
2
4
Spring limit switch
accessories box / Magnetic
limit switch accessories box
1
4-1
or
Spring limit switch block
/ Magnetic limit switch block
1
4-2
Foundation bolt M10
4
4-3
Spring limit switch block mounting screw M6X10
/ Magnetic limit switch block
mounting screw M6X18
4
4-4
Nut M10
8
4-5
Flat washer Ø10
8
4-6
Spring washer Ø10
4
3
2. Packing List (optional)
No.
Picture
Name
Quantity
1
Steel gear rack
1m/pc
2
Nylon gear rack
1m/pc
3
Infrared sensor
1
4
0
8
5 6974
1 2 3
Wireless keypad
1
5
Alarm lamp
1
6
Mounting plate
1
7
Hexagon head bolt M10×60
4
Model
SL1000AC
SL1500AC
Power supply
220V/50Hz;110V/60Hz
220V/50Hz;110V/60Hz
Motor power
400W
550W
Gate moving speed
11-13m/min
11-13m/min
Maximum weight of gate
1000Kg
1500Kg
Remote control distance
≥30m
≥30m
Remote control mode
Single button mode
/ Three button mode
Single button mode
/ Three button mode
Limit switch
Spring limit switch
/ Magnetic limit switch
Spring limit switch
/ Magnetic limit switch
Noise
≤60dB
≤60dB
Working duty
S2, 20min
S2, 20min
Recording of up remote controls
25
25
3. Technical parameters
4
Frequency
433.92 MHz
433.92 MHz
Working temperature
-20°C ~ +70°C
-20°C ~ +70°C
Package weight
15Kg
16Kg
4. Installation
0
8
5 6974
1 2 3
SL1000AC/SL1500AC sliding gate opener is applicable to gate weight less than 1000kg/1500kg, and length of the sliding gate less than 12m. The drive mode adopts the rack and gear transmission. This gate opener must be installed inside the enclosure or yard for protection.
4.1 Installation drawing
Gate opener;②Wireless keypad (optional);③Gate;④Infrared sensor (optional);
Alarm lamp (optional);⑥Safety stop block;⑦Gear rack;⑧Remote control;
Figure 1
4.2 Size of main engine and accessories
4.2.1 Size of main engine
5
271
280
228
4.2.2 Size of mounting plate
27 0
17 7
150±0.3
141± 0.3
4×φ10
Figure 2
Figure 3
4.3 Installation procedures
4.3.1 Preparation work before installation
Please make sure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate can be manually moved smoothly before installing the gate opener.
Cable installation
In order to guarantee the normal operation of the gate opener and protect the cables from damages, please bury the motor & power cable and controlling cable separately with two PVC tubes.
Concrete pedestal
Please precast a concrete pedestal with the size can be 500mm x 300mm, depth be 250mm in advance, so as to firmly install SL1000AC/SL1500AC gate opener. Please make sure the
distance between the gate and gate opener is appropriate before casting the pedestal.
Loading...
+ 13 hidden pages