JOYTECH Control Center 240C User Manual

Control Center 240C

User Guide

Power/Standby Press to turn the Control Center power On and Off. The Power/Standby LED will

illuminate green when the power is on and red when the unit is in standby mode

Input Channel Each Input Channel name can be programmed in order to identify the AV device that
Display is connected to each Input Channel

Input Selector Press to page through and select the required Input Channel
IR Remote Receiver For use with the Remote Control
Display Setting These controls are used to program the Input Channel names

Controls displayed on the LCD Display
Input 7 Primarily used for temporary connection of camcorders and other AV devices to the

Control Center

rear view

The Control Center has a total of 7 Input Channels. Input 7 is located on the front panel and Inputs 1 to 6 are
located on the rear panel.

figure 1

3

english

english

english

welcome

Thank you for purchasing the JOYTECH Control Center 240C. Before connecting the Control Center,
please familiarize yourself thoroughly with this User Guide so that you fully understand the setup procedure
and functions of the product.

contents

Check that you have the following items:

1) Control Center 240C

2) Component Video Cable

3) Audio Cable

4) S-Video /Audio Cable

5) Composite /Audio Cable

6) Ethernet Cable

7) DC Power Adapter

8) Remote Control

9) User Guide

Control Center layout

front view

2 english

Power/Standby

Input Channel Display Input Selector

IR Remote Receiver

DC 12V IN

Input 1

Ethernet

(RJ45)

S-Video

Digital Optical Audio

Input 7Display Settings

Controls

Input 2 Input 3 Input 4 Input 5 Input 6 Output

Component Video

Composite Video (yellow)

Left Audio (white)

Right Audio (red)