Page 1
JoyPi
Experiment and Education Suitcase
Time for more
www .joy-it.n et
Published : 29.1 1 .2018
3
With the Joy-Pi, Joy-iT has developed a comprehensive educaon soluon and applied its many years of
experience in the producon of open source electronics. The Joy-Pi is an experimental case based on the
Raspberry Pi and is ideal for the entry into electrical engineering and programming.
The sophiscated case system oers a perfect all-in-one environment and puts an end to many ddly
small parts soluons and cable chaos on the worktable.
The Joy-Pi is also very well suited for school projects, as you can simply switch it o and close it at the end
of the lesson and then connue working on the project in the next hour. Another advantage of the case is
its great mobility and compactness. This allows you to take it with you wherever you go and explore the
Raspberry Pi universe with friends.
Page 2
Time for more
www .joy-it.n et
Published : 29.1 1 .2018
3
INCLUDED LESSONS
The following lessons are covered in the manual:
• Using the Buzzer for Warning Sounds or Nocaons
• Controlling the buzzer by entering the keys
• How a relay works and how to control it
• Send a vibraon signal with the vibraon module
• Detecng noises with the sound sensor
• Measuring brightness with the light sensor
• Measuring room temperature and humidity
• Detecng movements with the moon sensor
• Measuring distances with the ultrasonic sensor
• Controlling the LCD Display
• Reading and wring RFID cards with the RFID module
• Use stepper motor and perform step movements
• Control of servo motors via servo interfaces
• Controlling the 8x8 LED Matrix
• Controlling the 7-Segment Display
• Detect contact with the touch sensor
• Detecng inclinaons with the inclinaon sensor
• Using and Controlling the Buon Matrix
• Controlling and Using the IR Sensor
• Create your own custom circuit with the Breadboard
• Photographing with the Raspberry Pi Camera
Page 3
Time for more
www .joy-it.n et
Published : 29.1 1 .2018
3
INCLUDED MODULES
Sensors:
Light Sensor, Sound Sensor, Motion Sensor, Ultrasonic Sensor, Tilt Sensor, Infrared Sensor,
Touch Sensor, DH11 Temperature & Humidity Sensor, RFID Module, Tilt Sensor
Displays:
7“ Touchscreen LCD Display, 8x8 LED Matrix, 16x2 LED-Module, 4-Digit Segment-Display
Buttons:
Programmable 4x4 Button Matrix, 4 indepentend Buttons, 16 Switches
Motors:
Servo-Control, Servomotor, Stepper-Motor
Other Modules:
GPIO LED Indicator, Breadboard, Vibration Unit, Buzzer, Relais, 2MP Camera
Page 4
Time for more
www .joy-it.n et
Published : 29.1 1 .2018
3
INCLUDED ACCESSORIES
The following accessories are included in the set:
• Mini Keyboard & USB Receiver
• power supply
• GPIO Cable
• infrared sensor
• microSD card (32GB)
• servomotor
• Stepper Motor & Accessories
• RFID chip
• RFID card
• USB cable
• remote control
Page 5
Time for more
www .joy-it.n et
Published : 29.1 1 .2018
Model
JoyPi
Article No.
RB-JoyPi
Functions
Completely equipped set
Already integrated in a case
21 lessons, suitable for beginners and advanced
Integrated camera for photos and video recordings
Display
7“ Touchscreen Display
Resolution: 1024x600
Camera
2MP Camera
Compatible to
Raspberry Pi 2B, 3B, 3B+
Dimensions (JoyPi Case) 27 x 19 x 7cm
Scope of delivery
JoyPi Case, BT Keyboard, microSD Card (32GB), Power
Supply, Card Reader, RFID Card & Clip, Stepper Motor,
Servo Motor, IR Remote, GPIO Cable
EAN
4250236817330
3
TECHNICAL SPECIFICATIONS
Page 6
Time for more
www .joy-it.n et
Published : 29.1 1 .2018
3
SCHEMATIC DIAGRAM
Page 7
1 Raspberry Pi
2 GPIO LED Display
3 Breadboard - for creang custom circuits with external modules
4 16x2 LCD Module (MCP23008)
5 Power Supply
6 8x8 LED Matrix (MAX7219)
7 7 Segment LED Display (HT16K33)
8 Vibraon Module
9 Light sensor - to measure the light intensity (BH1750)
10 Buzzer - to generate alarm tones
11 sound sensor
12 Moon sensor (LH1778)
13 Ultrasonic Sensor - Used for distance measurement
14 / 15 Servo interfaces - For connecng servo motors
16 Stepper motor interface
17 Tilt sensor (SW-200D)
18 infrared sensor
19 touch sensor
20 DH11 Sensor - For measuring humidity and temperature
21 Relay - For opening and closing electronic circuits
22 buon matrix
23 Independent buons
24 RFID Module - For reading and wring data via RFID/NFC (MFRC522)
25 Switch - For switching between sensors and modules
Time for more
www .joy-it.n et
Published : 29.1 1 .2018
3
Loading...