32 KB EEPROM STORAGE MODULE
COM-EEPROM32
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
2. ADJUSTMENT OPTIONS
The EEPROM module has four jumpers, which oer further setting options. The jumpers A0, A1 and A2 are used to set the I2C address. The jumper WP (Write Protect) serves to prevent the writing of the EEPROM if necessary. This is active if the jumper is plugged in at the le.
Addresses A2 A1 A0
0x50 Right Right Right
0x51 Right Right Le
0x52 Right Le Right
0x53 Right Le Le
0x54 Le Right Right
0x55 Le Right Le
0x56 Le Le Right
0x57 Le Le Le
Loading...