Joy-It ALUMINIUM CASE FOR RASPBERRY PI 4 User guide

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

ALUMINIUM CASE FOR RASPBERRY PI 4

with mounting brackets (VESA75)
RB-AlucaseP4+06

1. GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.

Should you encounter any unexpected problems, do not hesitate to
contact
us.

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

2. ASSEMBLY

1. First of all, you have to unscrew the following screw to open the

case.

2. Aerwards, put the Raspberry Pi in the bottom part of the case and

screw it down with four screws.

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

3. Now insert the top of the case on the bottom and fasten it with the

screw you removed at the beginning.

4. Now you can mount the mounting brackets if requierd. These need

to be screwed onto the bottom of the case.

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

The case can now be mounted on your monitor for example.

Attention! Screws to mount the case onto something are not included in the scope of delivery.

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

PR

3. OTHER INFORMATION

Our Information and Take-back Obligations according to the

German Electronic Law (ElektroG)

Symbol on Electrial and Electronic Products:
This crossed-out bin means that electrical and electronic products do not
belong into the household waste. You must hand over your old appliance
to a registration place. Before you can hand over the old appliance, you
must remove used batteries and replacement batteries which are not
enclosed by the device.

Return Options:
As the end user, you can hand over your old appliance (which has
essentially the same functions as the new one bought with us) free of
charge for disposal with the purchase of a new device.

Small devices, which do not have outer dimensions bigger than 25 cm

can be handed in for disposal independently of the
purchase of a new product in normal household quantities.

1. Possibility of return at our company location during our opening hours
Simac Electronics Handel GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn

2. Possibility of return nearby
We will send you a parcel stamp with which you can send us your old
appliance free of charge. For this possibility, please contact us via e-mail
at [email protected] or via telephone.

Information about Package:

Please package your old appliance safe for transport. Should you not

have suitable packaging material or you do not want to use your own
material, you can contact us and we will send you an appropriate
package.

4. SUPPORT

If any questions remained open or problems may arise aer your
purchase,we are available by e-mail, telephone and ticket
support system to answer these.

E-Mail: [email protected]

Ticket-system: http://support.joy-it.net

Telephone: [phone] – 66 (10 - 17 o'clock)

For further information visit our website:

www.joy-it.net

Published: 04.02.2020

www.joy-it.net

SIMAC Electronics GmbH

Pascalstr. 8, 47506 Neukirchen-Vluyn