CVP-509/505/503/501
Tyros4
PSR-S910/S710
Internet Connection Guide
Internet Connection Guide
v1.10
v1.10
Enjoy your instrument with Internet Direct Connection
This instrument can be directly connected to the Internet, conveniently letting you
display and access the special website from the instrument’s display and enjoy the
various contents.
This guide provides detailed instructions on connecting. You can also refer to the
Internet-related terms at the end of this guide.
For the latest services of the Internet Direct Connection function, refer to the
Yamaha website:
http://services.music.yamaha.com/
NOTE
• Only the special website can be opened when the instrument is directly connected to the Internet.
* The illustrations and screens as shown in this guide are for instructional purposes only, and may appear somewhat different from
those on your instrument.
* Clicking on the Internet-related terms (blue characters) in this guide jumps to the “Glossary of Terms” at the end.
* The LCD screens shown in this guide are taken from the CVP-509.
Contents
Selection of the Connection Environment................................................ 2
Connection ........................................................................................................ 3
LAN Cable Connection .................................................................................... 3
Wireless LAN Connection Using USB LAN Adaptor ....................................... 6
Wireless LAN Connection Using Wireless Game Adaptor ............................ 12
Using Static IP Address or Proxy Server....................................................... 15
Connection Help............................................................................................. 19
Initialization of the Setup ............................................................................. 20
Glossary of Terms.......................................................................................... 21
Internet Connection Guide 1
Selection of the Connection Environment
To connect the instrument to the Internet, a full-time online connection (ADSL, optical fiber, cable Internet, etc.) using a
broadband router or a modem equipped with a router is necessary.
NOTE
• Since no broadband router or modem settings can be made by the instrument itself, use a computer to make the settings before connecting to the instrument.
• Since this instrument does not support PPPoE communication, it is not possible to directly connect to the modem without a router.
• Dial-up and ISDN connections cannot be used.
Depending on the Internet connection, the number of connectable devices may be limited. This may mean that your
instrument cannot be connected to the Internet. If in doubt, check your contract or contact your provider.
Select the connection environment of your home from the following.
Internet
For details on connection operations,
refer to page 3.
Provider
To use the Internet connection,
you will first need
to subscribe to
an Internet service or provider.
LAN cable connection
router
LAN cable
LAN
terminal
• It is comparatively inexpensive.
• Electric power source is unnecessary.
• Enables setting of a strong security format,
such as WPA2 format, etc.
•For a list of USB wireless LAN adaptors whose
compatibility has been confirmed by Yamaha,
refer to the website:
http://music.yamaha.com/download/
*A USB wireless LAN adaptor which is not on the list
cannot be used.
Modem
An ADSL modem, optical
network unit (ONU) or
cable modem
* Some modems have a
built-in router.
Wireless LAN Connection
Access point
with router
Set the instrument within 10–20 m
from the access point. If the signal
is weak, the loading of web pages
will become slow and the connection will be unstable. The signal will
not be received if there is an obstacle blocking reception.
USB wireless
LAN adaptor
USB TO
DEVICE
terminal
LAN
terminal
Wireless game
adaptor
• Enables setting of a strong security format,
such as WPA2 format, etc.
• Wireless connection of several Internet devices
is possible.
•For a list of wireless game adaptors whose
compatibility has been confirmed by Yamaha,
refer to the website:
http://music.yamaha.com/download/
For details on connection operations,
refer to page 6.
For details on connection operations,
refer to page 12.
For details on operations for connections using static IP address or proxy server, refer to page 15.
Internet Connection Guide 2
Connection
LAN Cable Connection
Connect the devices according to the example.
1
First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally
turn the power on again.
•For an illustration of the location of the LAN terminal, refer to the Owner’s Manual.
NOTE
LAN
terminal
LAN cable
Required Devices
• LAN cable
• Router (This is unnecessary if your modem has router capability.)
• Modem (ADSL modem, optical network unit or cable modem)
Router Modem
Internet
NOTE
• Before installing a new router, check that the router performs normally by connecting via a computer.
Press the [INTERNET] button.
2
When the special website appears
Since the instrument is connected to the special website, you do not need to make Internet settings. About the operations in
the special website, refer to the Owner’s Manual.
NOTE
• The special website screen above is taken from the CVP-509.
• The contents of the service as appearing here are current as of March, 2010. The available contents of the service are subject to change.
When the special website does not appear
Proceed to step 3.
NEXT PAGE
Internet Connection Guide 3
Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER]
3
button to execute.
Use the [A]/[B] buttons to select “SETUP WIZARD.”
4
Connection
Press the [B] button to select “LAN cable,” then press the [G] button to proceed to “NEXT.”
5
Make sure that the devices are connected as shown in the illustration of the display, then
6
press the [G] button to proceed to “NEXT.”
NEXT PAGE
Internet Connection Guide 4
Press the [G](CONNECTION) button to check the connection to the special website.
7
The settings are saved by checking the connection.
NOTE
• Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made.
Press the [G](DONE) button to connect to the special website.
8
When the special website appears, the network settings to the Internet are complete.
Connection
When the special website does not appear, refer to “Connection Help” on page 19.
For more details on the operations in the special website, refer to the Owner’s Manual.
Internet Connection Guide 5
Wireless LAN Connection Using USB LAN Adaptor
Connect the devices according to the example.
1
First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally
turn the power on again.
NOTE
•For an illustration of the location of the USB TO DEVICE terminal, refer to the Owner’s Manual.
Set the instrument within 10–20 m from the
access point. The signal will not be received if
USB TO
DEVICE
terminal
there is an obstacle blocking reception.
USB wireless
LAN adaptor
Access point
with router
Modem
Internet
Connection
Required Devices
• USB wireless LAN adaptor
For a list of USB wireless LAN adaptors whose compatibility has been confirmed by Yamaha, refer to the
website:
http://music.yamaha.com/download/
* A USB wireless LAN adaptor which is not on the list cannot be used.
• Access point with router (The router capability here is unnecessary if your modem has router capability.)
• Modem (ADSL modem, optical network unit or cable modem)
NOTE
• About the confirmation and changes in the setting of the access point with router side, read the owner’s manual for the product you are
using.
• Before installing a new router, check that the router performs normally by connecting via a computer.
Press the [INTERNET] button.
2
Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER]
3
button to execute.
NEXT PAGE
Internet Connection Guide 6
Use the [A]/[B] buttons to select “SETUP WIZARD.”
4
Press the [C] button to select “Wireless LAN using USB LAN adaptor,” then press the [G] but-
5
ton to proceed to “NEXT.”
Connection
Make sure that the devices are connected as shown in the illustration of the display, then
6
press the [G] button to proceed to “NEXT.”
NEXT PAGE
Internet Connection Guide 7
Use the [B]/[C] buttons to select the desired setup of the wireless network.
7
Setup by WPS (push button)
You can make the setting for the wireless network by simply pressing the WPS button of the access point with router. The
security is automatically set, you don’t need to make any other settings, such as key input, etc.
NOTE
•You need to make sure that your USB wireless LAN adaptor and access point with router support WPS. Check whether your USB wireless
LAN adaptor supports WPS by accessing the URL of “Required Devices” on page 6.
Press the [B] button to select “Setup by WPS (push button),” then press the [G] button to proceed to “NEXT.”
Connection
Proceed to step 8.
Setup after searching for wireless networks
When the list of the access points near the instrument is displayed, select the access point to be used. The SSID, channel
and security format of the selected access point are automatically set. When the security is set, input the key.
Press the [C] button to select “Setup after searching for wireless networks,” then press the [G] button to proceed to “NEXT.”
Proceed to step 9.
NEXT PAGE
Internet Connection Guide 8
Press the [F](YES) button, then within 2 minutes hold down the WPS button of the access
8
point with router.
For details about the operations in the setting of the access point on the router side, read the owner’s manual
for the product you are using.
Proceed to step 13.
Use the [DATA ENTRY] dial to select the desired access point, then press the [G] button to
9
proceed to “NEXT.”
The SSID, channel and security format of the selected access point are automatically set. An access point that
is security-enabled is displayed with a padlock icon “ ,” Input the key. Make sure that the settings are the
same as those for the access point on the router side.
Connection
NOTE
•For details on confirmation and changes in the setting of the access point on the router side, refer to the owner’s manual for the product you
are using.
Signal
strength
The signal strength may not be displayed
depending on the particular USB wireless
LAN adaptor you are using.
With padlock icon “ ”
Since the security is set to your access point with router, proceed to step 10, then input the key.
No padlock icon
If your access point with router has not been security-enabled, you don’t need to make a setting for the wireless LAN. Pro-
ceed to step 13 on page 11. If you want to set the security to the access point, change this in the settings of your access point
with router.
NEXT PAGE
Internet Connection Guide 9
Press the [D](KEY) button to call up the character-entry display to input the key.
10
Input the key.
11
Refer to the Owner’s Manual for character-entry details.
Connection
To cancel the key input, press the [8t](CANCEL) button.
Press the [G](NEXT) button to set the key input.
12
When you set the key input, the characters are hidden and displayed as “******.”
Make a written note of the settings, in case you have to enter them again.
Access point
Security setting YES NO
Security format —
Key —
SSID
Channel
NEXT PAGE
Internet Connection Guide 10
Press the [G](CONNECTION) button to check the connection to the special website.
13
The settings are saved by checking the connection.
NOTE
• Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made.
Press the [G](DONE) button to connect to the special website.
14
When the special website appears, the network settings to the Internet are complete.
Connection
When the special website does not appear, refer to “Connection Help” on page 19.
For details on operations in the special website, refer to the Owner’s Manual.
Internet Connection Guide 11
Wireless LAN Connection Using Wireless Game Adaptor
Connect the devices according to the example.
1
First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally
turn the power on again.
NOTE
•For an illustration of the location of the LAN terminal, refer to the Owner’s Manual.
Set the instrument within 10–20 m from the
access point. The signal will not be received if
LAN
terminal
there is an obstacle blocking reception.
LAN cable
Wireless
game adaptor
Access point
with router
Modem
Internet
Connection
NEXT PAGE
Required Devices
• LAN cable
• Wireless game adaptor
For a list of wireless game adaptors whose compatibility has been confirmed by Yamaha, refer to the web-
site:
http://music.yamaha.com/download/
• Access point with router (The router capability here is unnecessary if your modem has router capability.)
• Modem (ADSL modem, optical network unit or cable modem)
NOTE
• The wireless game adaptor requires connection to the AC outlet. For details on changes in the settings of the wireless game adaptor,
read the owner’s manual for the product you are using.
• About confirmation and changes in the setting of the access point on the router side, read the owner’s manual for the product you are
using.
• Before installing a new router, check that the router performs normally by connecting via a computer.
Internet Connection Guide 12
Press the [INTERNET] button.
2
When the special website appears
Since the instrument is connected to the special website, you do not need to make Internet settings. For details on operations
in the special website, refer to the Owner’s Manual.
NOTE
• The special website screen above is taken from the CVP-509.
• The contents of the service as appearing here are current as of March, 2010. The available contents of the service are subject to change.
Connection
When the special website does not appear
Proceed to step 3.
Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER]
3
button to execute.
Use the [A]/[B] buttons to select “SETUP WIZARD.”
4
NEXT PAGE
Internet Connection Guide 13
Press the [D] button to select “Wireless LAN using Wireless Game Adaptor,” then press the
5
[G] button to proceed to “NEXT.”
Make sure that the devices are connected as shown in the illustration of the display, then
6
press the [G] button to proceed to “NEXT.”
Connection
Press the [G](CONNECTION) button to check the connection to the special website.
7
The settings are saved by checking the connection.
NOTE
• Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made.
Press the [G](DONE) button to connect to the special website.
8
When the special website appears, the network settings to the Internet are complete.
When the special website does not appear, refer to “Connection Help” on page 19.
For details on operations in the special website, refer to the Owner’s Manual.
Internet Connection Guide 14
Using Static IP Address or Proxy Server
Some cases may require detailed knowledge of the network settings.
Turn the power of the instrument on, then press the [INTERNET] button.
1
Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER]
2
button to execute.
Connection
Press the [C] button to select “ADVANCED SETTINGS.”
3
Use the TAB [<][>] buttons to call up the desired page.
4
NEXT PAGE
Internet Connection Guide 15
Use the [A]–[J] buttons to select the desired parameter.
5
For details on each parameter, refer to page 18.
Select the setting or change the value.
6
Selecting the setting
Use the [2 st]/[3 st] buttons to select the setting, then use the [4 st](OK) button to execute.
Connection
Changing the value
Enter the value, then press the [8 s](OK) button to execute.
Refer to the Owner’s Manual for character-entry details.
NEXT PAGE
Internet Connection Guide 16
Use the [7 st] buttons to select “OK.”
7
Press the [G](YES) button to save the settings.
8
Connection
NOTE
• Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made.
Connect the devices.
9
First turn the power of the instrument off, then connect the devices, and finally turn the power on again.
Press the [INTERNET] button to connect to the special website.
10
When the special website appears, the network settings to the Internet are complete.
When the special website does not appear, refer to “Connection Help” on page 19.
For details on operations in the special website, refer to the Owner’s Manual.
Internet Connection Guide 17
Parameters
IP INFORMATION
DHCP Determines the DHCP ON/ON (SET DNS MANUALLY)/OFF settings.
IP ADDRESS/SUBNET MASK/
GATEWAY
DNS SERVER 1/2 These settings must be made when DHCP above is set to “ON (SET DNS MANUALLY)” or “OFF.”
PROXY SERVER
PROXY SERVER/PROXY PORT Determines the proxy server name and port number.
WIRELESS LAN
Determines the IP ADDRESS/SUBNET MASK/GATEWAY settings. These settings must be made
when DHCP above is set to “OFF.”
Connection
SSID Determines the SSID setting.
CHANNEL Determines the channel.
SECURITY
KEY Input the key when SECURITY above is set to something other than OFF.
WPS (PIN CODE) Used when inputting the PIN code for the setup.
Determines the security setting: OFF/WEP/WPA-PSK (TKIP)/WPA-PSK (AES)/WPA2-PSK (TKIP)/
WPA2-PSK(AES).
Internet Connection Guide 18
Connection Help
If the instrument is not connected to the Internet, sometimes the [HELP] button appears on the display. You can view the
solutions by selecting “HELP.”
Press the [G] button to select “HELP.”
1
Error code
For details about each code,
refer to the following URL:
http://services.music.
yamaha.com/idc/faq.html
Use the [DATA ENTRY] dial to select a solution (Details), then press the [ENTER] button to view
2
the details.
Solve the problem with the displayed solutions.
3
Use the [DATA ENTRY]
dial to select the link, then
press the [ENTER] button
to see the comments.
Check the part where the
Check mark is displayed.
Internet Connection Guide 19
Initialization of the Setup
CAUTION
• This restores the network settings to the default settings.
Press the [INTERNET] button.
1
Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER] but-
2
ton to execute.
Press the [E] button to select “INITIALIZE SETUP.”
3
Press the [G](YES) button to initialize the settings.
4
Internet Connection Guide 20
Glossary of Terms
Access point
broadband
DHCP
DNS SERVER A server that maps names to actual IP addresses of devices connected to a network.
GATEWAY A Gateway is a link between two computer programs or systems.
Internet
IP ADDRESS
LAN
link
MAC address An identifying number used to distinguish network devices.
MAC address filter
Modem
Provider
PROXY PORT This number determines which server port to connect to.
PROXY SERVER A computer that relays Internet communications for security and efficiency.
router
Security setting of access
point
Server A hardware system or computer used as a central point for a network, providing access to files and services.
Site
SSID A name used to identify a particular access point, or the wireless networks set as the access point.
SUBNET MASK The structure for dividing a large-scale network.
WEP A standard of security format of wireless LAN.
Wireless game adaptor
Wireless LAN A LAN connection that allows data transfer through a wireless, cable-free connection.
wireless network Wireless network where signal is sent and received by using electric waves.
WPA/WPA2 A standard of security format of wireless LAN. It is more secure than the WEP format adopted in the past.
WPS
A device that allows devices like your Yamaha instrument to connect to the Internet using a wireless network. Some
access points are combined with the modem.
An Internet connection technology/service (such as ADSL and optical fiber) that allows for highspeed, high-volume
data communication.
A standard or protocol by which IP addresses and other low-level network configuration information can be dynamically and automatically assigned each time the computer and the instrument connect to the Internet.
A huge network made up of networks, the Internet allows high-speed data transfer among computers, mobile
phones and other devices.
A string of numbers assigned to each computer connected to a network that indicate the device’s location on the network.
Short for Local Area Network, this is a data-transfer network that connects a group of computers at a single location
(such as an office or home) by means of a special cable.
Location information in other sentences and images, etc. that are under buttons and character strings on a web
page. When the place with the link is clicked, the page selection jumps to the relevant link.
The mechanism for restricting network devices that can connect to an access point. Unless the device has registered its MAC address with the access point, it cannot connect to the access point.
A device which connects and allows data transfer between a conventional telephone line and a computer. It converts
the digital signals from the computer to analog audio for sending over the phone line, and vice versa.
A communications business that offers Internet connection services. In order to connect to the Internet, it is necessary to contract to a provider.
A device that allows multiple devices (e.g., computers, your Yamaha instrument) to share the same Internet connection.
Protects data passed from various access points from being intercepted from an unauthorized person/device.
Short for “website,” this refers to the group of web pages that are opened together. For example, the collection of
web pages whose addresses begin with “http://www.yamaha.com/” is referred to as the Yamaha site.
A device that allows easy wireless connection with digital consumer electronic devices, printers, and game
machines, etc. equipped with [LAN] ports.
A structure to easily make a setting of wireless LAN by pushing only the WPS buttons of an access point and the
wireless LAN device.
U.R.G., Digital Musical Instruments Division
© 2010 Yamaha Corporation
003POXXX.X-XXA0
About Using BSD-Licensed Software
The software used by this product includes components
that comply with the BSD license.
The restrictions placed on users of software released
under a typical BSD license are that if they redistribute
such software in any form, with or without modification,
they must include in the redistribution (1) a disclaimer of
liability, (2) the original copyright notice and (3) a list of
licensing provisions.
The following contents are displayed based on the
licensing conditions described above, and do not govern
your use of the product.
WPA Supplicant
Copyright © 2003-2009, Jouni Malinen <j@w1.fi> and
contributors
All Rights Reserved.
This program is dual-licensed under both the GPL version
2 and BSD license. Either license may be used at your
option.
License
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
3. Neither the name(s) of the above-listed copyright
holder(s) nor the names of its contributors may be used
to endorse or promote products derived from this
software without specific prior written permission.
XySSL
Copyright © 2006-2008, Christophe Devine.
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
* Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
* Neither the name of XySSL nor the names of its
contributors may be used to endorse or promote
products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Loading...