JouJye MRT 6300P, MRT 6320P, MRW 6400P, MRW 6420P User guide
PRODUCTS MANUAL
MRT/MRW SERIES
PS/2 Size Mini-Redundant Power Supply
Rev .: A1
P/N: 702-10042
INDEX
1.1 Introduction page 2~3
1.2 Packing page 3
1.3 Model Designation page 3
1.4 Features page 4
1.5 Pre-Installation page 5
1.6 Drawing page 6~8
1.7 Specification page 9~10
1.8 Installation & Testing page 11~12
1.9 Hot-Swap Procedures page 13~14
1.10 Pin-outs and function of connectors page 15
1.11 Trouble shooting page 16
1
1.1 INTRODUCTION
First of all, thank you for purchasing MRT/MRW Series – PS/2 size Mini
Redundant power supply. The MRT/MRW Series are 1+1, Hot
swappable/Hot-pluggable/Redundant power supply set, it consists of:
(1) Complete metal frame (nickel-plated)
(2) Compact size (real PSII form factor) 1+1 power modules
(3) Backplane board
The MRT/MRW Series of hot swappable redundant power supply offer
maximum 300/320/400 watts of output power. The MRT/MRW series provide
Active Power Factor correction (PFC) at full range AC Input that complies with
IEC 1000-3-2 for CE norms. The units are compact size as PS/2 form factor and
all the power modules are built interior 40X40X20 mm /40X40X28 mm ball
bearing DC fans for better ventilation. Each power module has been designed
with +3.3V, +5V, +12V, -12V, -5V & 5VSB circuits. All you can see on the
backplane board are passive components and this is the key point of greater
MTBF.
The units also provide a warning sub-system, including LED display, buzzer
alarm, TTL signal etc.. At the same time, it also indicates the status of the power
system and DC fans.
2
When all the power modules are at normal condition, it balances the load share
through its parallel design and results in the increasing reliability of the power
system.
In order to use the power supply more effectively and safely, we suggest that
you read through this manual carefully in advance of the installation and any
operation.
1.2 PACKING
Your MRT/MRW box package should consist of the following:
(A) MRT/MRW Redundant set *1
(B) Accessory pack *1
(C) Product manual *1
1.3 MODEL DESIGNATION
Model number identification:
MRT --- 6300P, 6320P
MRW --- 6400P, 6420P
MR --- Mini-Redundant (AC Input)
6 --- for 6 DC outputs (5V/12V/-5V/-12V/3.3V/5VSB) for
ATX 2.03/ATX 12V/EPS12V (SSI) Spec.
300/320/400/420 --- total output power (unit: watt)
P --- with PFC (Power Factor Correction) built in
3
1.4 FEATURES
MRT/MRW Series --- Mini Redundant power supply (W/PFC).
1+1, Hot swappable, Hot pluggable, AC Input
PSII Size, 300W/320W/400W/420W +300W/320W/400W/420W, W/PFC
Dimension : 86 (H) x 150 (W) x 185 (D) m/m
True Redundant design (Passive backplane)
All circuit been designed in the power module
Hot swap, Hot plug ability
Full range operation (AC input voltage 90V~264V )
Active Power Factor Correction (PFC) built in
ATX 300W +300W /320W+320W /400W+400W /420W+420W output
power
Balanced load sharing design
Remote sensing design
Meet FCC, CISPR EMI regulation
Isolated fence design to meet safety regulation
Compact size (PSII form factor)
Revovable handle design
4
1.5 PRE-INSTALLATION
Before installing the MRT/MRW unit into the system chassis, please review the
following drawing page and find out the best way to match them.
1.6 DRAWING ( page 6~8)
1.7 SPECIFICATIONS ( page 9~10)
5
Loading...