Jou Jye JJ-3052M-SS operation manual
JJ-3052M-SS
(A 2277)
Front View Rear View
*When A5 switch is turned to OFF position, the HDD accessing function is disabled. In this case, the front
accessing LED is displayed in solid green for the “power ON” function only.
Jou Jye Computer GmbH - Lilienthalstr. 3 – 41515 Grevenbroich | www.jj-computer.com | info@jj-computer.com
● A1 = FAN status LED
(Normal : Green Failed : Red)
● A2 = Temperature status LED
(Normal : Green Failed : Red)
● A3 = Triangle Safety lock
● A4 = HDD power & access LED
● A5 = HDD LED Switch (enable/disable)
● A6 = FAN Speed switch
High (3000rpm)/Low (2400rpm)
● A7 = External signal jumper
● A8 = Temperature setting jumper
(55℃/60℃/65 )℃
● A9 = 15pin Power connector x 2
● A10 = SATA data signal connector x 5
LED A4
State HDD in HDD Access A5 turn OFF
Color Green Orange Green
Blink x o x
•
Material: Aluminum Frame & bezel
•
With aluminum HDD tray
•
Interface: Support SATA-I, II, III & SAS I, II
•
Transfer rate: Up to 6Gbps
•
Connector: 15pin SATA-power connector x 2 & 7pin data signal connector x 5
•
Black aluminum-body with Black panel
•
Sides sliding rails with vibration reducing springs
•
Triangle metal key-lock safeguards the hard disk in the correct position preventing it bouncing
out while HDD is in operation.
•
Support SATA and SAS primary channel
•
Hot swap in / out
•
3 * 5.25 Bay for 5 * 3.5” (or 2.5”) SATA or SAS Hard drives
•
HDD LED functioning ON/OFF Switch
•
Switch for cooling fan (High or Low speed)
•
Dim: 211(L) * 146(W) * 126(H) mm
•
Weight: 2.08 kgs
•
Color: black
•
Fan: 8cm FAN x 1
Jou Jye Computer GmbH - Lilienthalstr. 3 – 41515 Grevenbroich | www.jj-computer.com | info@jj-computer.com
Loading...