Joovy 42, 43 Instruction Manual

Toy Caboose Stroller Instruction Manual Page 1

Toy Caboose Stroller

Instruction Manual

These instructions are for the

following Joovy Style Numbers:

042, 043

Please read these instructions in their entirety to ensure

the proper assembly and use of your toy. Keep these

instructions for future reference.

Joovy • 2919 Canton Street • Dallas, TX 75226 • [phone] • Fax: [phone]

E-mail: [e-mail] • Website: www.joovy.com

Page 2 Toy Caboose Stroller Instruction Manual

WARNINGS

• This product is a TOY stroller for dolls or stuffed toys ONLY.

• NEVER use this toy to carry a baby or child for any purpose whatsoever. Death
or Serious Injury may occur.

• Maximum weight allowed = 5 pounds in EACH seat.

• DO NOT stand on platform. Riding is for dolls or stuffed toys ONLY.

• This product contains small parts. Adult assembly is required.

• The maximum weight that can be carried in the storage basket is 5 pounds

• Discard all packaging materials properly. Do not allow children to play with
them.

•

Discontinue use of the stroller should it malfunction or become damaged.

•

Please contact our customer service department to arrange for repair or obtain
replacement parts.

•

Do not use this toy on stairways or escalators.

•

Hanging bags or other toys from the handlebars or any other parts of this toy
may change its balance and cause a hazardous unstable condition.

• When installing a toy infant carrier onto the stroller, ALWAYS use the restraining
strap to secure the carrier in place.

!

Please do not return this product to the store

If you experience any difculty with the assembly or use of this product, or if you have a

question regarding these instructions, please contact our Customer Service Department

at [phone] between the hours of 8:30 am and 5:00 pm Central Time.

Please note: Styles and colors may vary.

Although this is a TOY and must NEVER be used for a baby or child, other
warnings are provided throughout this manual to promote your child’s safe
use of this product for their doll or stuffed toy. For your child’s understanding
of the safe use of this product, please read and adhere to these warnings
and insure that your child also understands and follows them.

Toy Caboose Stroller Instruction Manual Page 3

Assembling and Using your Stroller

To ensure safe operation of your stroller, please follow these instructions carefully.

Unpacking the Product

• Carefully remove stroller and all parts from the box and plastic bag.

• Remove the cardboard packing materials from the ends of the frame.

• Identify the parts (stroller, canopy, tray, front wheels (2), rear wheels (2), rear axle,
washers (2), axle locks (2), axle caps (2), hubcaps (2), car seat carrier support and
documents with the pictures in Figures 1 and 1A.

• Discard all packaging materials properly. Do not allow children to play with them.

WARNING

Adult assembly required. No tools required. Package

contains small parts. Keep small parts out of children’s reach

during assembly.

Figure 1 Figure 1A

Unfolding the stroller

• Orient the stroller with the handle bar
away from you.

• Release the locking latch located on
the lower right side by lifting up the
lever. See Figure 2.

• Lift up on the stroller handle with both
hands until the stroller is in the open
position and both side frame bars
snap into place in their holders.

Figure 2

Page 4 Toy Caboose Stroller Instruction Manual

Figure 6

Installing the Rear
Wheels

• Turn your stroller upside down so
that it is resting on the seatback.

• Locate the rear axle and slide it
through the holes into the frame near
the platform.

• Locate a metal washer and slide the
washer onto one end of the axle.
See Figure 3.

• Locate a rear wheel and slide the
wheel onto the axle.

IMPORTANT NOTE: The left

and right side wheels are slightly
different. The correct wheel will have
the arrow shapes on the tire tread
pointed towards the REAR of the
stroller. Be CERTAIN that the wheels
are placed on the correct side of the
axle, because this is intended to be
a one-time assembly.

• Locate an axle lock. While holding
the axle from the opposite side,
orient the axle lock with the larger
side closest to the wheel and snap it
onto the axle. See Figure 4.

• Fit a rear axle cap over the
attachment. You will hear this piece
snap into place. See Figure 5.

• While holding the wheel, line up the
four prongs on the hubcap with the
holes in the spoke of the wheel and
snap into place. See Figure 6. Be
CERTAIN that all four prongs snap
into place. Pull on the hubcap to be
sure it is installed securely.

• Repeat these steps on the other
side.

• Ensure that each wheel assembly
is secure before using this toy. Pull
on the wheels to be sure they are
installed correctly.

Figure 3

Figure 4

Figure 5