Page 1
ASSEMBLY INSTRUCTIONS FOR YOUR
(A)
(B)
(C)
(D)
(E)
CANNAN HALF ROUND TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.
* Switch power o and remove plug from the wall outlet before replacing the bulb.
* Do not connect electricity until lamp is fully assembled.
* This lamp is UL rated for dry locations.
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect elecrticity until lamp is fully assembled.
1. Unpack all parts and remove packing materials. Place lamp base on level surface.
2. Remove nial (A) from harp (C). Squeeze harp (C) inward and place into the opening of saddle (D).
3. Place shade (B) onto harp (C). Thread nial (A) back onto the harp to secure shade to the lamp.
4. Install one 150W max. Type A, medium base bulb into the socket.
5. Remove protective plastic from plug (E).
6. Insert plug (E) into wall outlet.
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **
889
Loading...