ASSEMBLY INSTRUCTIONS FOR YOUR
CANNAN TABLE LAMP
(A)
(B)
(C)
(D)
(E)
(F)
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will fi t in a polarized outlet only one way. If it does not fi t fully in the outlet, reverse the plug. If it still does not fi t,
contact a qualifi ed electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.
* Switch power off and remove plug from the wall outlet before replacing the bulb.
* Do not connect electricity until lamp is fully assembled.
ASSEMBLY INSTRUCTIONS:
NOTE: Be sure to locate diffuser (B) before discarding packing materials.
1. Unpack all parts and remove packing materials. Place lamp base on level surface.
2. Remove fi nial (A) from harp (D). Squeeze harp (D) inward and place into the opening of saddle (E).
3. Place shade (C) onto harp (D). Place diffuser (B) onto the top of shade (C). Thread fi nial (A) back onto the harp to
secure the shade to the lamp.
4. Install one 150W max. Type A, medium base bulb into the socket.
5. Remove protective plastic from plug (F).
6. Insert plug (F) into wall outlet.
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **
796
Loading...