Page 1
(A)
(B)
(C)
(D)
(E)
(F)
ASSEMBLY INSTRUCTIONS FOR YOUR
CANAAN FLOOR LAMP
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other)
as a feature to reduce the risk of electric shock. This plug will
t in a polarized outlet only one way. If it does not t fully in the
outlet, reverse the plug. If it still does not t, contact a qualied
electrician.
Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp
can be fully inserted into the extension cord receptical.
* Switch power o and remove plug from the wall outlet before
replacing the bulb.
* This lamp is UL rated for dry locations.
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Unpack all parts and remove packing materials. Place
lamp base on a level surface.
2. Remove nial (A) from shade riser (D). Thread shade riser
(D) onto socket housing (E).
3. Place shade (C) onto shade riser (D).
4. Place diuser (B) onto shade riser (D).
5. Thread nial (A) back onto shade riser (D) to secure
placement of shade and diuser.
6. Insert two 100W Max. Type A, medium base bulbs into the
sockets.
7. Insert polarized plug (F) into wall outlet.
8. Use pull chains to control power to the lamp.
**To clean, use a soft cloth only. Do not use any chemical or
abrasive cleaners.**
681
Loading...