Page 1
ASSEMBLY INSTRUCTIONS FOR YOUR
VERSAILLES BUFFET TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the
(A)
other) as a feature to reduce the risk of electric shock. This
plug will t in a polarized outlet only one way. If it does
not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician. Do NOT alter the
plug.
* Do not use with an extension cord unless the plug from the
(B)
lamp can be fully inserted into the extension cord
receptacle.
* Switch power o and remove plug from the wall outlet
before replacing the bulb.
(D)
* This lamp has been UL rated for dry locations.
(C)
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Unpack all parts and remove packing materials. Place
lamp base on level surface.
2. Remove nial (A) from harp (C). Squeeze harp (C)
inward and place into the opening of saddle (D).
3. Place shade (B) onto harp (C). Thread nial (A) back onto
the harp to secure the shade to the lamp.
4. Install one 60W max. Type A, medium base bulb into the
socket.
5. Insert plug (E) into wall outlet.
(E)
6. Control power to lamp by rotating switch on cord.
** To clean, use a soft cloth only. Do not use any chemical
or abrasive cleaners. **
A900
Loading...