Combination Strainer Valve
Y-Strainer • Isolation Ball Valve • Union • 600 WOG • with Stainless
Steel Trim
Terminator Y SS
Features
• Three additional accessory tap
• Triple sealing stem with 2 Viton® o-rings and Teon® seal
• Blow out proof stem
• 100% leak tested
Pressure and Temperature Rating
• 600 WOG
• 325°F Max
Smart Part Number Ordering Guide
TYSS-CF2RM-XQ
TYSS C F 2RM X Q
Optional
Valve Size
A 1/2"
B 3/4"
C 1"
D 1-1/4"
E 1-1/2"
F 2"
Body Type
F FNPT
C SWT
Tailpiece Size and Type
No Reduction
F FNPT
M MNPT
C SWT
Single Reduction*
RF FNPT
RM MNPT
RC SWT
Double Reduction**
2RF FNPT
2RM MNPT
2RC SWT
*Only available on 3/4" - 2" valves
**Only available on 1" - 2" valves
Optional Accessories
X Extended Handle
Accessories
XH Extended Handle
Only
XP Extended PT Port /
Accessories Only
V Manual Air Vent
AB Automatic Air Vent
w/Ball Valve
B Ball Valve Air Vent
Q Blowdown / Drain
F
E
G
A
DIRECTION OF FLOW
Material Specications
Part Material
Body Brass - C85700
End Connection Brass -CW617N
Ball 316 Stainless Steel
Seat (2) PTFE
Stem 316 Stainless Steel
Packing PTFE
Stem O-ring (2) Viton®
Packing Gland Brass -CW617N
Handle Steel - Zinc Plated
Handle Nut Brass -CW617N
Service Cap Brass -CW617N
Service Cap O-ring Viton®
Strainer 304 Stainless Steel
Union Gasket EPDM
Tail Piece Brass - C37700
Union Nut Brass - C37700
Dimensions
Size A* B C D E F G Cv
1/2" 5.03 3.40 1.70 1.60 0.25 0.50 0.25 5.50
3/4" 5.88 3.40 1.80 2.40 0.25 0.50 0.25 9.00
1" 6.25 3.40 1.80 2.40 0.25 0.50 0.25 9.00
1-1/4" 7.8 8 4.40 2.50 3.50 0.25 0.75 0.25 28.00
1-1/2" 8.00 4.40 2.50 3.50 0.25 0.75 0.25 28.00
2" 10.31 5.50 3.50 4.50 0.25 0.75 0.25 32.00
*Length is for a SWT x FNPT valve, additional dimensions available upon request
C
D
Note: Infor mation subject to change without notice. Prior to installation, pleas e revi ew the IO&M document, which can be found at ww w.jom arhydronics.com/resources
26
Jomar Hydronics ・ 7243 Miller Drive, Warren, MI 48092 ・ www.jomarhydronics.com ・ phone: (586) 268-1220 ・ fax: (586) 979-8315
060915