Jomar Terminator S User Manual

Combination Strainer Valve

Integrated Isolation Ball Valve and Strainer • Union • 400 WOG

Terminator S

DIRECTION OF FLOW

Features

• Integrated backush

• Pressure / temperature (PT) test ports

• Two additional accessory tap

• Triple sealing stem with 2 Viton® o-rings and Teon® seal

• Blow out proof stem

• 100% leak tested

• Made in Italy

Pressure and Temperature Rating

• 400 WOG

• 250°F Max

Smart Part Number Ordering Guide

TS-BFF-XHQ

TS B F F XH Q

Optional

Valve Size

A 1/2" B 3/4" C 1" D 1-1/4" E 1-1/2" F 2"

Body Type

F FNPT C SWT

Tailpiece Size and Type

No Reduction

F FNPT

M MNPT

C SWT

Single Reduction*

RF FNPT

RM MNPT

RC SWT

Double Reduction**

2RF FNPT

2RM MNPT

2RC SWT

*Only available on 3/4" - 2" valves **Only available on 1" - 2" valves

Optional Accessories

X Extended Handle

Accessories

XH Extended Handle

Only

XP Extended PT Port /

Accessories Only

V Manual Air Vent

AB Automatic Air Vent

w/Ball Valve B Ball Valve Air Vent Q Drain

QQ Drain and Blowdown

Drain/Blowdown note: Q= Drain for draining coil, QQ = Drain for coil and blowdown for strainer backush

Material Specications

Part Material

Body Brass - CW602N End Connection Brass - CW602N Ball Chrome Plated Brass - CW602N Seat (2) Virgin PTFE Stem Brass - CW602N Packing Virgin PTFE Stem O-ring (2) Viton® Packing Gland Brass - CW614N Handle Steel - Geomet® Plated Handle Nut Steel - Geomet® Plated Filter Basket 304 Stainless Steel C-Clip Retainer 304 Stainless Steel Body Insert Brass - CW602N Auxiliary Seat Virgin PTFE Cap Brass - CW602N O-ring Viton® Back Flush Plug Brass - CW614N Back Flush O-ring Viton® Back Flush Cap Brass - CW614N Union (See Terminator U Spec Sheet)

Dimensions

Size A* B C Cv

1/2" 5.70 2.40 4.75 13.02 3/4" 5.70 2.40 4.75 13.02

1" 6.50 2.60 4.75 16.28 1-1/4" 7.38 3.23 5.88 24.20 1-1/2" 8.13 3.50 5.88 39.63

2" 9.44 3.15 8 .13 74.85

*Length is for a FNPT x FNPT valve, additional dimensions available upon request

Note: Infor mation subject to change without notice. Prior to installation, pleas e revi ew the IO&M document, which can be found at ww w.jom arhydronics.com/resources

060915

Jomar Hydronics ・ 7243 Miller Drive, Warren, MI 48092 ・ www.jomarhydronics.com ・ phone: (586) 268-1220 ・ fax: (586) 979-8315