Jomar Terminator N SS User Manual
C
Combination Ball Valve
Isolation Ball Valve • Union • 600 WOG • with Stainless Steel Trim
D
A
DIRECTION OF FLOW
B
Terminator N SS
Features
• Pressure / temperature (PT) test ports
• Additional accessory tap
• Triple sealing stem with 2 Viton® o-rings and Teon® seal
• Blow out proof stem
• 100% leak tested
Pressure and Temperature Rating
• 1/2" - 3/4" 600 WOG
• 1" - 2" 500 WOG
• 300°F Max
Smart Part Number Ordering Guide
NTSS-FFRM-XHQ
NTSS F F RM XH Q
Optional
Valve Size
A 1/2"
B 3/4"
C 1"
D 1-1/4"
E 1-1/2"
F 2"
Body Type
F FNPT
C SWT
Tailpiece Size and Type
No Reduction
F FNPT
M MNPT
C SWT
Single Reduction*
RF FNPT
RM MNPT
RC SWT
Double Reduction**
2RF FNPT
2RM MNPT
2RC SWT
*Only available on 3/4" - 2" valves
**Only available on 1" - 2" valves
Optional Accessories
X Extended Handle
Accessories
XH Extended Handle
Only
XP Extended PT Port /
Accessories Only
V Manual Air Vent
AB Automatic Air Vent
w/Ball Valve
B Ball Valve Air Vent
M Memory Stop
Q Blowdown / Drain
Material Specications
Part Material
Body T.E.A. Coated Brass - CW617N
End Connection T.E.A. Coated Brass - CW617N
Ball 316 Stainless Steel
Seat (2) Hostaon® TFM 1600
Stem 316 Stainless Steel
Packing Hostaon® TFM 1600
Stem O-ring (2) Viton®
Packing Gland Nickel Plated Brass - CW614N
Handle Steel - Geomet® Plated
Handle Nut Steel - Geomet® Plated
Union (See Terminator U Spec Sheet)
Dimensions
Size A B C D Cv
1/2" 5.17 1.53 2.95 0.59 16.82
3/4" 5.34 1.93 3.74 0.79 34.80
1" 6.03 2.40 4.72 1.00 52.20
1-1/4" 7.2 2 2.59 4.72 1.25 112. 52
1-1/2" 7.7 0 3.22 5.90 1.57 174.00
2" 8.62 3.50 5.90 2.00 255.20
*Length is for a FNPT x MNPT valve, additional dimensions available upon request
Note: Infor mation subject to change without notice. Prior to installation, pleas e revi ew the IO&M document, which can be found at ww w.jom arhydronics.com/resources
060915
Jomar Hydronics ・ 7243 Miller Drive, Warren, MI 48092 ・ www.jomarhydronics.com ・ phone: (586) 268-1220 ・ fax: (586) 979-8315
31
Loading...