Jomar Terminator N Press User Manual
C
Combination Ball Valve
Isolation Ball Valve • Union • Press Body Connection • 250 WOG
D
A
DIRECTION OF FLOW
B
Terminator N Press
Features
• Pressure / temperature (PT) test ports
• Additional accessory tap
• Triple sealing stem with 2 Viton® o-rings and Teon® seal
• Blow out proof stem
• 100% leak tested
Pressure and Temperature Rating
• 250 WOG
• 300°F Max
Smart Part Number Ordering Guide
NT-BPRC-XV
NT B P RC X V
Optional
Valve Size
A 1/2"
B 3/4"
C 1"
D 1-1/4"
E 1-1/2"
F 2"
Body Type
P Press
Tailpiece Size and Type
No Reduction
F FNPT
M MNPT
C SWT
Single Reduction*
RF FNPT
RM MNPT
RC SWT
Double Reduction**
2RF FNPT
2RM MNPT
2RC SWT
*Only available on 3/4" - 2" valves
**Only available on 1" - 2" valves
Optional Accessories
X Extended Handle
Accessories
XH Extended Handle
Only
XP Extended PT Port /
Accessories Only
V Manual Air Vent
AB Automatic Air Vent
w/Ball Valve
B Ball Valve Air Vent
M Memory Stop
Q Blowdown / Drain
Material Specications
Part Material
Body Brass - CW617N
End Connection Brass - CW617N
Press O-ring EPDM
Ball Chrome Plated Brass -CW617N
Seat (2) Virgin PTFE
Stem Brass - CW614N
Packing Virgin PTFE
Stem O-ring (2) Viton®
Packing Gland Brass - CW614N
Handle Steel - Geomet® Plated
Handle Nut Steel - Geomet® Plated
Union O-ring Viton®
Tail Piece Brass - CW617N
Union Nut Brass - CW617N
Dimensions
Size A* B C D Cv
1/2" 5.29 1.53 2.95 0.59 20.25
3/4" 5.38 1.93 3.74 0.79 41.83
1" －** 2.40 4.72 1.00 78.38
1-1/4" －** 2.59 4.72 1.25 132.10
1-1/2" －** 3.22 5.90 1.57 206.96
2" －** 3.50 5.90 2.00 346.00
*Length is for a Press x FNPT valve, additional dimensions available upon request
**1" - 2" is FNPT body with MNPT x Press adapter
Note: Infor mation subject to change without notice. Prior to installation, pleas e revi ew the IO&M document, which can be found at ww w.jom arhydronics.com/resources
32
Jomar Hydronics ・ 7243 Miller Drive, Warren, MI 48092 ・ www.jomarhydronics.com ・ phone: (586) 268-1220 ・ fax: (586) 979-8315
060915
Loading...