Jomar Terminator A User Manual

Automatic Balancing Valve

Automatic Flow Limiter • Isolation Ball Valve • Union • 600 WOG

Terminator A

Features

• 2-50 PSID operating range

• +/- 5% Accuracy

• Two pressure / temperature (PT) test ports

• Location tag

• Two additional accessory tap

• Triple sealing stem with 2 Viton® o-rings and Teon® seal

• Blow out proof stem

• 100% leak tested

• See end of catalog for GPM ordering guide

Pressure and Temperature Rating

• 600 WOG

• 325°F Max

Smart Part Number Ordering Guide

TA-CFM-L-RD 2.0

TA 2.0C F M R D

Valve Size

A 1/2" B 3/4" C 1" D 1-1/4" E 1-1/2" F 2"

Body Type

F FNPT C SWT

Tailpiece Size and Type

No Reduction

F FNPT

M MNPT

C SWT

Single Reduction*

RF FNPT

RM MNPT

RC SWT

Double Reduction**

2RF FNPT

2RM MNPT

2RC SWT

*Only available on 3/4" - 2" valves **Only available on 1" - 2" valves

See GPM

ordering guide

See GPM

Optional

Optional Accessories

X Extended Handle, PT

Ports and Accessories XH Extended Handle Only XP Extended PT Port /

Accessories Only

V Manual Air Vent

AB Automatic Air Vent

w/Ball Valve

B Ball Valve Air Vent

ordering guide

DIRECTION OF FLOW

Material Specications

Part Material

Body Brass - C85700 End Connection Brass -CW617N Ball Chrome Plated Brass -CW617N Seat (2) PTFE Stem Brass -CW617N Packing PTFE Stem O-ring (2) Viton® Packing Gland Brass -CW617N Handle Steel - Zinc Plated Handle Nut Brass -CW617N Service Cap Brass -CW617N Service Cap O-ring Viton® Union Gasket EPDM Tail Piece Brass - C37700 Union Nut Brass - C37700 Balancing Cartrage Brass, Stainless steel, EPDM Cartrage Retaining Spring Stainless Steel

Dimensions

Size A* B C D E F

1/2" 5.54 1.70 3.40 1.60 0.50 0.25 3/4" 6.38 1.80 3.40 2.40 0.50 0.25

1" 6.81 1.80 3.40 2.40 0.50 0.25 1-1/4" 8.88 2.50 4.40 3.50 0.75 0.25 1-1/2" 9.13 2.50 4.40 3.50 0.75 0.25

2" 11.38 3.50 5.50 4.50 0.75 0.25

*Length is for a SWT x MNPT valve, additional dimensions available upon request

Note: Infor mation subject to change without notice. Prior to installation, pleas e revi ew the IO&M document, which can be found at ww w.jom arhydronics.com/resources

060915

Jomar Hydronics ・ 7243 Miller Drive, Warren, MI 48092 ・ www.jomarhydronics.com ・ phone: (586) 268-1220 ・ fax: (586) 979-8315