Jomar PP-200 Installation Manual

Pneumatic
positioner
PP-200 Series

INSTRUCTION
MANUAL

1. GENERAL

The pneumatic positioner PP-200 is used for rotary operation of pneumatic rotary valve actuators by means
of pneumatic control systems with an output signal of 3-15psi or split ranges.

2. FEATURES

• There is no resonance in the range of 5-200Hz.

• Performing 1/2 Split Control without any other substitutes.

• Easy to adjust zero and span.

• Easy to convert from Reverse Action to Direct Action or vice versa.

• Fast and accurate response

• Low air consumption

• Easy to protect from hunting effect by using output orifice when
using a small size of actuator.

• Designed as Multi-port type of for air tubing

• Easy to install air tubing connection in any direction

• Designed as modular structure for maintenance and repair

MAIN PARTS LIST

3. Specifications